Typhoon Intakes

kolby1976 · June 12th, 2007, 06:13 PM

Wanted to get some info on the typhoon intakes by professional products to see if any one got a dyno before and after to see what kind of power they made. They claim to make like 25 HP that sounds a bit high.

02StangGToWNEr · June 12th, 2007, 07:03 PM

I never used them, but I heard they are JUNK! Trickflows intakes are suppose to be good though.

SWEET2KSTANG · June 12th, 2007, 07:19 PM

a friend of mine put one on his mustang and it is junk. nothing fit good, his is polished and it still loos like crap, power loss is noticable below 4k. above 4k its good, but its not worth the money!

Drgnracin72 · June 12th, 2007, 08:52 PM

+1 one what all of these guys have said. the casting are crap, the fitment is crap and they dont make the power that professional products advertises them to make. why are you wanting an intake? there is no need unless your spraying more than a 150 shot or your an all out n/a race motor

Wildsteeda · June 12th, 2007, 11:19 PM

I agree with all the above mentioned, but if you really want to spend the money get the trickflow intake with single t/b set up, or if you REALLY have the money get the foxlake P-51 intake, best intake made for the modular engine. but it's going to set you back about $1300.oo bucks. the trickflow will be around $700.oo

Drgnracin72 · June 12th, 2007, 11:34 PM

and its not good on a motor thats a street motor. youll lose a ton of poiwer down below the curve and make about 20 on the very top above 5500 rpms. not worth the loss unless its a race engine. the pi intake by fomoco was a very well designed unit. makes good torque down low as well as good power above. the best intake on the market for the 2v is the bullitt intake.

MustangMatt96GT · June 12th, 2007, 11:47 PM

Yeah I wish there was a cast/aluminum intake that was the exact replica of the PI! I just put fired my stang up with the PI intake on it today and it seems to do fine! I havent taken it above 2200 RPM yet so I dont know if I gained power! lol

And Drgn that sig is great!!

tlr96 · June 12th, 2007, 11:49 PM

dont waste your money!

zkid01 · June 13th, 2007, 12:03 AM

Just like all these guys have been saying.. its just junk. If you want to upgrade away from the plastic go with the bullit intake like drgnracin said.

SWEET2KSTANG · June 13th, 2007, 12:06 AM

i will be doing the hardballr intake from texas hot rods. maybe that is what you are looking for?

Drgnracin72 · June 13th, 2007, 02:02 AM

hard baller is the next best next to the bullitt

LeadFoot_GT · June 13th, 2007, 08:46 AM

jumping on the band wagon here....

+1 on what all these guys said as well....complete JUNK.

the Bullit Intake, Hardballr intake, and Foxlake's P51 are good manifolds. i've heard that Trickflow's new one was good as well....not so much in the n/a part of it unless highly modded, but on FI thats when it really shines. Basically a knock off of the bullit intake (probably small differences, not to sure, but its pretty obvious where the design is from...)

but yeah go with what these guys are recommending kolby

sonicblue · June 13th, 2007, 09:18 AM

anybody got a dyno graph on forced induction with the trickflow

KhaosGT · June 13th, 2007, 11:41 AM

has anyone heard or seen anything on the ssi intake for the 2v that bbk is coming out with?

MustangMatt96GT · June 13th, 2007, 12:57 PM

sonic I do have a link to a guy on modularfords with one!

http://www.modularfords.com/forums/f...ake-83502.html

DILO2001GT · June 13th, 2007, 07:05 PM

i have heard its junk. i hear the hard ball'r is a great intake from a few people but I just bought a bullit intake manifold.

03 R Code · June 13th, 2007, 07:09 PM

I'll throw up a vote for the hardballer intake too. I heard it's closer to a race intake than a street intake though...

Drgnracin72 · June 13th, 2007, 08:32 PM

they all are closer to race intakes on the 2v, there is simply no need for one.

June 12th, 2007, 06:13 PM	#1
kolby1976 Newbie Join Date: Jun 2007 Location: round rock Posts: 4 iTrader: 0 reviews	Typhoon Intakes Wanted to get some info on the typhoon intakes by professional products to see if any one got a dyno before and after to see what kind of power they made. They claim to make like 25 HP that sounds a bit high.

June 12th, 2007, 07:19 PM	#3
SWEET2KSTANG mm's nitrous mod 2000 mustang gt 11.79@115.83 (old set up) Join Date: Oct 2006 Location: N.W. AR Posts: 12,430 iTrader: 8 reviews	a friend of mine put one on his mustang and it is junk. nothing fit good, his is polished and it still loos like crap, power loss is noticable below 4k. above 4k its good, but its not worth the money! __________________ project warhorse under construction being built by MP2 Performance

June 12th, 2007, 08:52 PM	#4
Drgnracin72 I Post Entirely Way Too Much Join Date: Jan 2006 Location: somewhere in oklahoma Posts: 10,638 iTrader: 2 reviews	+1 one what all of these guys have said. the casting are crap, the fitment is crap and they dont make the power that professional products advertises them to make. why are you wanting an intake? there is no need unless your spraying more than a 150 shot or your an all out n/a race motor __________________ RIP ΜΟΛΩΝ ΛΑΒΕ Political Correctness is a doctrine, fostered by a delusional, illogical, liberal minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end. One Big Ass Mistake America SHEEPDOGS

June 12th, 2007, 11:19 PM	#5
Wildsteeda Regular 1999 Mustang GT Join Date: May 2007 Location: Fort Riley Posts: 124 iTrader: 0 reviews	I agree with all the above mentioned, but if you really want to spend the money get the trickflow intake with single t/b set up, or if you REALLY have the money get the foxlake P-51 intake, best intake made for the modular engine. but it's going to set you back about $1300.oo bucks. the trickflow will be around $700.oo __________________ Mamma I wanna go FAST!

June 12th, 2007, 11:34 PM	#6
Drgnracin72 I Post Entirely Way Too Much Join Date: Jan 2006 Location: somewhere in oklahoma Posts: 10,638 iTrader: 2 reviews	and its not good on a motor thats a street motor. youll lose a ton of poiwer down below the curve and make about 20 on the very top above 5500 rpms. not worth the loss unless its a race engine. the pi intake by fomoco was a very well designed unit. makes good torque down low as well as good power above. the best intake on the market for the 2v is the bullitt intake. __________________ RIP ΜΟΛΩΝ ΛΑΒΕ Political Correctness is a doctrine, fostered by a delusional, illogical, liberal minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end. One Big Ass Mistake America SHEEPDOGS

June 12th, 2007, 07:03 PM	#2
02StangGToWNEr Hardcore Enthusiast 2006 Mustang GT Join Date: Feb 2007 Location: Upstate NY Posts: 2,698 iTrader: 0 reviews	I never used them, but I heard they are JUNK! Trickflows intakes are suppose to be good though.

June 12th, 2007, 11:47 PM	#7
MustangMatt96GT Proud American 1996 Mustang GT 10.76 @ 122 with d/a of 8365 ft Join Date: Dec 2006 Location: Lakewood, CO Posts: 10,168 iTrader: 3 reviews	Yeah I wish there was a cast/aluminum intake that was the exact replica of the PI! I just put fired my stang up with the PI intake on it today and it seems to do fine! I havent taken it above 2200 RPM yet so I dont know if I gained power! lol And Drgn that sig is great!! __________________ RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions Blown Small Block Ford with a hole in the block. 9.5 Dart Block 400 CI being saved for. Just because you can fuck a cactus doesn't mean you should. Never Lift Racecars

June 12th, 2007, 11:49 PM	#8
tlr96 Hardcore Enthusiast 1996 Mustang GT Join Date: Mar 2007 Location: Effingham, IL Posts: 1,796 iTrader: 0 reviews	dont waste your money! __________________ view my garage for pics and modifications listen to my exhaust video 1 video 2 video 3

June 13th, 2007, 12:03 AM	#9
zkid01 Enthusiast Join Date: Apr 2007 Location: Pearl Harbor, HI Posts: 606 iTrader: 0 reviews	Just like all these guys have been saying.. its just junk. If you want to upgrade away from the plastic go with the bullit intake like drgnracin said. __________________ Work Hard....Play Harder.

June 13th, 2007, 12:06 AM	#10
SWEET2KSTANG mm's nitrous mod 2000 mustang gt 11.79@115.83 (old set up) Join Date: Oct 2006 Location: N.W. AR Posts: 12,430 iTrader: 8 reviews	i will be doing the hardballr intake from texas hot rods. maybe that is what you are looking for? __________________ project warhorse under construction being built by MP2 Performance

June 13th, 2007, 02:02 AM	#11
Drgnracin72 I Post Entirely Way Too Much Join Date: Jan 2006 Location: somewhere in oklahoma Posts: 10,638 iTrader: 2 reviews	hard baller is the next best next to the bullitt __________________ RIP ΜΟΛΩΝ ΛΑΒΕ Political Correctness is a doctrine, fostered by a delusional, illogical, liberal minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end. One Big Ass Mistake America SHEEPDOGS

June 13th, 2007, 08:46 AM	#12
LeadFoot_GT Regular 2003 DSG Mustang Cobra Join Date: Apr 2007 Location: Rockville, MD Posts: 240 iTrader: 0 reviews	jumping on the band wagon here.... +1 on what all these guys said as well....complete JUNK. the Bullit Intake, Hardballr intake, and Foxlake's P51 are good manifolds. i've heard that Trickflow's new one was good as well....not so much in the n/a part of it unless highly modded, but on FI thats when it really shines. Basically a knock off of the bullit intake (probably small differences, not to sure, but its pretty obvious where the design is from...) but yeah go with what these guys are recommending kolby

June 13th, 2007, 09:18 AM	#13
sonicblue Hardcore Enthusiast 1990 GT Join Date: Aug 2006 Location: dalzell, south carolina Posts: 1,436 iTrader: 0 reviews	anybody got a dyno graph on forced induction with the trickflow __________________ 1990 5.0 getting all fixed up for next season 2004 mustang gt 520rwhp, 491 trq sold

June 13th, 2007, 11:41 AM	#14
KhaosGT Enthusiast 2004 Mustang GT Join Date: Jan 2007 Location: Fort Worth, TX Posts: 970 iTrader: 0 reviews	has anyone heard or seen anything on the ssi intake for the 2v that bbk is coming out with? __________________ 2004 Black Mustang Gt When I see a 5.0...I respect my elders.

June 13th, 2007, 12:57 PM	#15
MustangMatt96GT Proud American 1996 Mustang GT 10.76 @ 122 with d/a of 8365 ft Join Date: Dec 2006 Location: Lakewood, CO Posts: 10,168 iTrader: 3 reviews	sonic I do have a link to a guy on modularfords with one! http://www.modularfords.com/forums/f...ake-83502.html __________________ RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions Blown Small Block Ford with a hole in the block. 9.5 Dart Block 400 CI being saved for. Just because you can fuck a cactus doesn't mean you should. Never Lift Racecars

Threads Similar to: Typhoon Intakes
Thread	Thread Starter	Forum	Replies	Last Post
typhoon intake?	4.6gtmarine	99-04	5	February 20th, 2007 10:56 PM
Typhoon problems...Why Me?	Max02420	99-04	5	December 6th, 2006 10:07 AM
Typhoon Intake	DragonFreak	99-04	72	November 29th, 2006 08:07 AM
Typhoon Intake	ayyubam2002	General Tech	1	August 6th, 2006 04:21 PM

June 13th, 2007, 07:05 PM	#16
DILO2001GT Regular 2001 GT 11.9 @116 Join Date: Oct 2005 Location: waltham, mass Posts: 357 iTrader: 0 reviews	i have heard its junk. i hear the hard ball'r is a great intake from a few people but I just bought a bullit intake manifold. __________________ 12.04 at 115mph with a 1.9 60'

June 13th, 2007, 07:09 PM	#17
03 R Code MM Fanatic unstoppable @ speed of light Join Date: Jul 2006 Location: Knees deep in dat ass Posts: 3,103 iTrader: 0 reviews	I'll throw up a vote for the hardballer intake too. I heard it's closer to a race intake than a street intake though... __________________ Political correctness is a doctrine fostered by a delusional, illogical, liberal minority, and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end.

June 13th, 2007, 08:32 PM	#18
Drgnracin72 I Post Entirely Way Too Much Join Date: Jan 2006 Location: somewhere in oklahoma Posts: 10,638 iTrader: 2 reviews	they all are closer to race intakes on the 2v, there is simply no need for one. __________________ RIP ΜΟΛΩΝ ΛΑΒΕ Political Correctness is a doctrine, fostered by a delusional, illogical, liberal minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end. One Big Ass Mistake America SHEEPDOGS

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

All times are GMT -4. The time now is 10:54 PM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.