retro c pillars

xedubx · June 24th, 2007, 02:20 PM

i found these really cool looking retro c pillars for 94-04 stangs. anyone have any idea what it would cost to paint this type of part to match it to the car?

energiesource · June 24th, 2007, 02:52 PM

It would probably be around 100 for both, but dont quote me on that
i just cant grasp the idea of those full c-pillars on these types of cars, they look weird imo

xedubx · June 24th, 2007, 04:19 PM

really? these were the first ones i've seen that i thought looked good themselves and preserved the look of the car... just my take on em. anyone else have thoughts on the look?

energiesource · June 24th, 2007, 04:55 PM

those ones arent so bad, but the only thing i dont like is that it isnt one piece all along the side, so theres that gap right at the top of the c-pillar, where it joins, i dunno, haha. i like the mach 1 c-pillars
but as for the retro look
+1

DrHolliday · June 24th, 2007, 05:08 PM

I love that look man. I wish I had a hard top so I could get them.

Garhfer · June 24th, 2007, 05:31 PM

Hell yeah, I'd run them if I had a hard top with a rear window louver!

xedubx · June 24th, 2007, 05:59 PM

so yall also think the rear window louver from american muscle would be a good combo with those c pillar louvers? i like em too but dont wanna go over the top and make my stang look like one of those ricers with shit hangin off of it everywhere, lol. heres a similar look i like as well

Garhfer · June 24th, 2007, 06:07 PM

naw I think they look awesome man

energiesource · June 24th, 2007, 06:09 PM

are those 18's?

00vabchgt · June 24th, 2007, 06:59 PM

i don't like em on the new edge stangs. on the s-197's they make sense because the whole car has that retro look. i think it's kinda dumb to put "retro" parts on a car that isn't "retro". but hey, to each his own i guess.

03_StangGuy · June 24th, 2007, 09:51 PM

Originally Posted by energiesource

those ones arent so bad, but the only thing i dont like is that it isnt one piece all along the side, so theres that gap right at the top of the c-pillar, where it joins, i dunno, haha. i like the mach 1 c-pillars
but as for the retro look
+1

Could always get em molded in for a few bucks more. Btw where did you find these? they are sick, I was thinkin bout building a custome set but may not have to now

energiesource · June 24th, 2007, 09:53 PM

they have them on mrbodykit.com i know that much
as to somewhere more...reputable, not sure

xedubx · June 25th, 2007, 12:32 AM

i found these on mrbodykit.com. apparently they were originally produced by jms but now these guys... i like them alright and think i might give em a shot, it kinda sets the car off ya know?

xedubx · June 25th, 2007, 12:37 AM

hey energie heres the view from the top showing how the same piece with a scoop lines up. looks like it sets pretty flush. just thought id show you an example.

energiesource · June 25th, 2007, 01:29 AM

thats not too bad
i've always thought mrbodykit seemed like a decent place, but some would probably disagree.

matrixpuba · June 25th, 2007, 03:46 AM

ewwwwwwww not for me!!!!

June 24th, 2007, 02:52 PM	#2
energiesource MM Fanatic Join Date: Oct 2006 Location: Up der in canada eh Posts: 3,527 iTrader: 1 reviews	It would probably be around 100 for both, but dont quote me on that i just cant grasp the idea of those full c-pillars on these types of cars, they look weird imo __________________ 2000 Mustang GT, 417hp/421tq, P1SC @ 6 psi(?), Custom grind cams, Steeda Triax shifter, SLP LM2, MAC L/T and O/R H-pipe. 18x9/10 Flat Black FR500's, Mach C-pillars, bullitt side scoops/skirts.

June 24th, 2007, 04:19 PM	#3
xedubx Regular Join Date: May 2007 Location: Lonestarville Posts: 68 iTrader: 0 reviews	really? these were the first ones i've seen that i thought looked good themselves and preserved the look of the car... just my take on em. anyone else have thoughts on the look? __________________ Go Baby Go!

June 24th, 2007, 04:55 PM	#4
energiesource MM Fanatic Join Date: Oct 2006 Location: Up der in canada eh Posts: 3,527 iTrader: 1 reviews	those ones arent so bad, but the only thing i dont like is that it isnt one piece all along the side, so theres that gap right at the top of the c-pillar, where it joins, i dunno, haha. i like the mach 1 c-pillars but as for the retro look +1 __________________ 2000 Mustang GT, 417hp/421tq, P1SC @ 6 psi(?), Custom grind cams, Steeda Triax shifter, SLP LM2, MAC L/T and O/R H-pipe. 18x9/10 Flat Black FR500's, Mach C-pillars, bullitt side scoops/skirts.

June 24th, 2007, 05:08 PM	#5
DrHolliday Enthusiast Join Date: Mar 2007 Location: New Port, NC Posts: 717 iTrader: 0 reviews	I love that look man. I wish I had a hard top so I could get them. __________________ Mustangless atm 2006 2500 HD Diesel. Built allison trans and other goodies

June 24th, 2007, 05:31 PM	#6
Garhfer Hardcore Enthusiast 2004 Mustang GT Conv. Join Date: Mar 2007 Location: Edgewater, FL Posts: 1,790 iTrader: 0 reviews	Hell yeah, I'd run them if I had a hard top with a rear window louver! __________________ 2004 GT Boosted by Vortech

June 24th, 2007, 06:07 PM	#8
Garhfer Hardcore Enthusiast 2004 Mustang GT Conv. Join Date: Mar 2007 Location: Edgewater, FL Posts: 1,790 iTrader: 0 reviews	naw I think they look awesome man __________________ 2004 GT Boosted by Vortech

June 24th, 2007, 06:09 PM	#9
energiesource MM Fanatic Join Date: Oct 2006 Location: Up der in canada eh Posts: 3,527 iTrader: 1 reviews	are those 18's? __________________ 2000 Mustang GT, 417hp/421tq, P1SC @ 6 psi(?), Custom grind cams, Steeda Triax shifter, SLP LM2, MAC L/T and O/R H-pipe. 18x9/10 Flat Black FR500's, Mach C-pillars, bullitt side scoops/skirts.

June 24th, 2007, 09:53 PM	#12
energiesource MM Fanatic Join Date: Oct 2006 Location: Up der in canada eh Posts: 3,527 iTrader: 1 reviews	they have them on mrbodykit.com i know that much as to somewhere more...reputable, not sure __________________ 2000 Mustang GT, 417hp/421tq, P1SC @ 6 psi(?), Custom grind cams, Steeda Triax shifter, SLP LM2, MAC L/T and O/R H-pipe. 18x9/10 Flat Black FR500's, Mach C-pillars, bullitt side scoops/skirts.

June 25th, 2007, 12:32 AM	#13
xedubx Regular Join Date: May 2007 Location: Lonestarville Posts: 68 iTrader: 0 reviews	i found these on mrbodykit.com. apparently they were originally produced by jms but now these guys... i like them alright and think i might give em a shot, it kinda sets the car off ya know? __________________ Go Baby Go!

June 25th, 2007, 01:29 AM	#15
energiesource MM Fanatic Join Date: Oct 2006 Location: Up der in canada eh Posts: 3,527 iTrader: 1 reviews	thats not too bad i've always thought mrbodykit seemed like a decent place, but some would probably disagree. __________________ 2000 Mustang GT, 417hp/421tq, P1SC @ 6 psi(?), Custom grind cams, Steeda Triax shifter, SLP LM2, MAC L/T and O/R H-pipe. 18x9/10 Flat Black FR500's, Mach C-pillars, bullitt side scoops/skirts.

June 25th, 2007, 03:46 AM	#16
matrixpuba Hardcore Enthusiast Join Date: Sep 2006 Location: tennessee Posts: 2,364 iTrader: 0 reviews	ewwwwwwww not for me!!!! __________________

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: retro c pillars
Thread	Thread Starter	Forum	Replies	Last Post
Let's get more classic in the retro	Lankolf	Classic Mustangs	3	September 22nd, 2007 10:17 AM
A PILLARS	SUPERCOUPE	2005 - 2010	3	June 28th, 2007 11:33 AM
louver c-pillars? yes no?	energiesource	99-04	1	February 4th, 2007 10:49 PM
Where Can I Get C-Pillars	lugthug713	94-95	0	November 1st, 2006 07:18 PM

All times are GMT -4. The time now is 11:03 PM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.