New Tune/ p51 intake

CobraR · July 10th, 2007, 07:30 PM

So i just got my car fixed and tuned by HBH, Horsepower by hermann, this past weekend. Picked it up today. I have a bbk CAI, 75mm TB, p51 intake, UPR pullies, o/r x pipe, 40 series flowmaster muffs. And now an SCT xcal 2 tune. He was able to get me 267.82 hp and 306.04 torque. I'll put up the graph when i figure out how.

03 R Code · July 10th, 2007, 08:25 PM

Nice #s... Did the tuner say how much he think you got from the p51 intake? Who makes those anyways. I remember reading or hearing something about them, but it's been a long time since then...

Invictus · July 10th, 2007, 08:38 PM

bad ass!

+1 i'm curious to know how much gains you picked up from the p51 and how much did it cost you, also why did you decide to swap intakes?

sonicblue · July 10th, 2007, 08:56 PM

i think the intake is about 700 its made by foxlake racing. you have to use aftermarket fuel rails with it. im also curious about the results from that intake.

MustangMatt96GT · July 10th, 2007, 09:19 PM

Sonic what intake did you use? I thought you used that but I must be mistaken!

04GTAMPA · July 10th, 2007, 09:19 PM

I'm not sure he got the best he could. I'm getting 261 at the wheels and 308 torque N/A and I don't have the P51 and UD pullies. I wonder if the tune could be better...

Smoothgrandmama · July 10th, 2007, 09:25 PM

218 hp stock

CAI + TB =7 Hp!
Pullies =5Hp!
Exhuast = 15Hp!
Tune =15Hp!

Intake = 7Hp??????

Now keep in mind this isn't fact.....just some really good guess's!!!!!!

04GTAMPA · July 10th, 2007, 09:30 PM

for $700-800 on an intake, I better get more than just 7. I got 16 hp after slapping the K&N CAI and 75mm TB/Plenum. Don't know how much each one, but that is the last thing I did to the car, after the full exhaust. With the tweaking on the dyno/tune, we ended at 261. It could have been 265-266, but I was really close to detonation thanks to the timing and gaping of the plugs (N2o)

04GTAMPA · July 10th, 2007, 09:33 PM

Originally Posted by CobraR

So i just got my car fixed and tuned by HBH, Horsepower by hermann, this past weekend. Picked it up today. I have a bbk CAI, 75mm TB, p51 intake, UPR pullies, o/r x pipe, 40 series flowmaster muffs. And now an SCT xcal 2 tune. He was able to get me 267.82 hp and 306.04 torque. I'll put up the graph when i figure out how.

Will you be "there" on Thursday?

acmillr · July 10th, 2007, 09:43 PM

That intake is worth about 0 HP with your mods. You need some heads and cams.

04GTAMPA · July 10th, 2007, 09:45 PM

Originally Posted by acmillr

That intake is worth about 0 HP with your mods. You need some heads and cams.

acmillr · July 10th, 2007, 10:47 PM

Originally Posted by 04GTAMPA

Originally Posted by acmillr

That intake is worth about 0 HP with your mods. You need some heads and cams.

04GTAMPA · July 10th, 2007, 10:49 PM

She came back!

acmillr · July 10th, 2007, 10:55 PM

Seriously, get the cams and I know someone who can cut you a great deal on installation.

Invictus · July 10th, 2007, 11:10 PM

Originally Posted by acmillr

That intake is worth about 0 HP with your mods. You need some heads and cams.

I'd have to agree.

04GTAMPA · July 10th, 2007, 11:28 PM

totally true. Could have spent the money on something like cams for much more power.

CobraR · July 11th, 2007, 12:54 AM

well there is no baseline. ive had it for about a year already and got screwed with the installation

CobraR · July 11th, 2007, 12:56 AM

Yes, ill the 'there' on thursday. The next step is gears, heads and cams. i just need to start saving now and get a good job. I'm pretty happy with the numbers cuz it was 99*F in his shop and 40% humidity.

sonicblue · July 11th, 2007, 07:33 AM

Originally Posted by MustangMatt96GT

Sonic what intake did you use? I thought you used that but I must be mistaken!

nope i still got the stocker on there. ive been tossing the idea around for a while to get one...just cant make my mind up on which one

04GTAMPA · July 11th, 2007, 08:39 AM

Originally Posted by CobraR

Yes, ill the 'there' on thursday. The next step is gears, heads and cams. i just need to start saving now and get a good job. I'm pretty happy with the numbers cuz it was 99*F in his shop and 40% humidity.

Anything you do to the car is an improvement. I guess now you have the intake to support better mods and make them work better. Good job.

July 10th, 2007, 08:25 PM	#2
03 R Code MM Fanatic unstoppable @ speed of light Join Date: Jul 2006 Location: Knees deep in dat ass Posts: 3,103 iTrader: 0 reviews	Nice #s... Did the tuner say how much he think you got from the p51 intake? Who makes those anyways. I remember reading or hearing something about them, but it's been a long time since then... __________________ Political correctness is a doctrine fostered by a delusional, illogical, liberal minority, and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end.

July 10th, 2007, 08:56 PM	#4
sonicblue Hardcore Enthusiast 1990 GT Join Date: Aug 2006 Location: dalzell, south carolina Posts: 1,436 iTrader: 0 reviews	i think the intake is about 700 its made by foxlake racing. you have to use aftermarket fuel rails with it. im also curious about the results from that intake. __________________ 1990 5.0 getting all fixed up for next season 2004 mustang gt 520rwhp, 491 trq sold

July 10th, 2007, 09:19 PM	#5
MustangMatt96GT Proud American 1996 Mustang GT 10.76 @ 122 with d/a of 8365 ft Join Date: Dec 2006 Location: Lakewood, CO Posts: 10,168 iTrader: 3 reviews	Sonic what intake did you use? I thought you used that but I must be mistaken! __________________ RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions Blown Small Block Ford with a hole in the block. 9.5 Dart Block 400 CI being saved for. Just because you can fuck a cactus doesn't mean you should. Never Lift Racecars

July 10th, 2007, 09:19 PM	#6
04GTAMPA Hardcore Enthusiast 2001 Mustang SVT Cobra Join Date: Apr 2007 Location: Riverview, FL Posts: 2,751 iTrader: 1 reviews	I'm not sure he got the best he could. I'm getting 261 at the wheels and 308 torque N/A and I don't have the P51 and UD pullies. I wonder if the tune could be better... __________________ Slow, really slow Cobra. Wanna see? MM Cobra Club Member #81 "TAMPA BAY AREA CREW"

July 10th, 2007, 09:25 PM	#7
Smoothgrandmama MasterDeBater 12 GT 8.46@88 1/8 Join Date: Apr 2007 Location: Willis,Texas Posts: 6,893 iTrader: 6 reviews	218 hp stock CAI + TB =7 Hp! Pullies =5Hp! Exhuast = 15Hp! Tune =15Hp! Intake = 7Hp?????? Now keep in mind this isn't fact.....just some really good guess's!!!!!! __________________ Join The MM Facebook: Modded Mustangs Facebook Vote For Modded Mustangs Ride of the Month Eskimo Brothers To Smooth: Safi, Blitz34, Graystang01, WillTheThrill, Bwal

New Tune/ p51 intake

New Tune/ p51 intake

Re: New Tune/ p51 intake

Reply

Re: Reply

July 10th, 2007, 08:38 PM	#3
Invictus Hardcore Enthusiast 1999 Mustang Join Date: Jul 2006 Posts: 1,355 iTrader: 0 reviews	bad ass! +1 i'm curious to know how much gains you picked up from the p51 and how much did it cost you, also why did you decide to swap intakes?

July 10th, 2007, 09:30 PM	#8
04GTAMPA Hardcore Enthusiast 2001 Mustang SVT Cobra Join Date: Apr 2007 Location: Riverview, FL Posts: 2,751 iTrader: 1 reviews	for $700-800 on an intake, I better get more than just 7. I got 16 hp after slapping the K&N CAI and 75mm TB/Plenum. Don't know how much each one, but that is the last thing I did to the car, after the full exhaust. With the tweaking on the dyno/tune, we ended at 261. It could have been 265-266, but I was really close to detonation thanks to the timing and gaping of the plugs (N2o) __________________ Slow, really slow Cobra. Wanna see? MM Cobra Club Member #81 "TAMPA BAY AREA CREW"

July 10th, 2007, 09:43 PM	#10
acmillr MM's Mad Scientist Slow Fella Join Date: Jul 2006 Location: Tupelo, MS Posts: 5,120 iTrader: 2 reviews	That intake is worth about 0 HP with your mods. You need some heads and cams. __________________

July 10th, 2007, 10:49 PM	#13
04GTAMPA Hardcore Enthusiast 2001 Mustang SVT Cobra Join Date: Apr 2007 Location: Riverview, FL Posts: 2,751 iTrader: 1 reviews	She came back! __________________ Slow, really slow Cobra. Wanna see? MM Cobra Club Member #81 "TAMPA BAY AREA CREW"

July 10th, 2007, 10:55 PM	#14
acmillr MM's Mad Scientist Slow Fella Join Date: Jul 2006 Location: Tupelo, MS Posts: 5,120 iTrader: 2 reviews	Seriously, get the cams and I know someone who can cut you a great deal on installation. __________________

July 10th, 2007, 11:28 PM	#16
04GTAMPA Hardcore Enthusiast 2001 Mustang SVT Cobra Join Date: Apr 2007 Location: Riverview, FL Posts: 2,751 iTrader: 1 reviews	totally true. Could have spent the money on something like cams for much more power. __________________ Slow, really slow Cobra. Wanna see? MM Cobra Club Member #81 "TAMPA BAY AREA CREW"

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: New Tune/ p51 intake
Thread	Thread Starter	Forum	Replies	Last Post
Aftermarket intake vs Cobra intake...	Brent Russell	5.0 Mustangs	11	April 27th, 2008 11:35 PM
dyno tune & flash tune	miafan	2005 - 2010	4	May 31st, 2007 05:05 AM
To Tune or not to Tune? That is the Question!	kevnsue	5.0 Mustangs	24	May 10th, 2007 08:22 PM
95' Mustang 5.0 HO intake swap for 93 cobra intake...	stang9587	5.0 Mustangs	1	April 3rd, 2007 06:20 AM
Need help using a 5.0 upper intake on a 5.8 lower intake	Washington5.0	5.0 Mustangs	4	March 9th, 2007 02:54 AM

All times are GMT -4. The time now is 03:07 AM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.