99-04 push start?

energiesource · August 1st, 2007, 09:43 PM

I know most of these are stupid and pointless but i was wondering if anyone knew of a push button ignition kit for a 99-00 or 01-04. Thanks

White99stang · August 1st, 2007, 09:44 PM

no there isn't one

HMUSN · August 1st, 2007, 09:49 PM

but where there is money there is a way...

energiesource · August 1st, 2007, 09:51 PM

well there are the 05 kits, but to put it in any practical spot is impossible on our model unless you buy one of those gauge dash clusters and somehow put it into one of those. other than that, i wouldnt know

HMUSN · August 1st, 2007, 09:51 PM

dude.. drill a hole

energiesource · August 1st, 2007, 09:54 PM

lol yes but is there any practical place without tearing my dash up? no thats right..lol

HMUSN · August 1st, 2007, 09:56 PM

yea.. pout it right next to your cupholder or do what I did when I installed my nitrous.. hook it up to your shifter bezel.. it looks clean.

HMUSN · August 1st, 2007, 09:58 PM

energiesource · August 1st, 2007, 10:09 PM

but i have the crappy interior aka 99-00 i really cant do shit with it, i wish i had a 2001 up dash

HMUSN · August 1st, 2007, 10:12 PM

you still have a shifter bezel dude.

see where I drilled my 2 toggle switches for my nitrous?

it looks good to me.

energiesource · August 1st, 2007, 10:16 PM

oh yeah i thought the newer shifter bezel had the buttons for the fog light and stuff in it, but thats the center part

HMUSN · August 1st, 2007, 10:17 PM

yup.

DO IT

energiesource · August 1st, 2007, 10:21 PM

so do you gotta turn the key all the way and then push the button or what

HMUSN · August 1st, 2007, 10:22 PM

i dunno. ask someone who has one.

99spaded · August 2nd, 2007, 12:34 AM

Well this is a popular mod for the dodge truck that are NOT the SRT 10, and it all depends on how you wire it, the guys that have done it to there truck on the dodge forum have it either way: Turn the key to the ON position then press the button to start and the key will also still start the truck, or make the button the only way you can start the truck!!! I have not seen one on our year mustangs though.....

06RedfireGT · August 2nd, 2007, 02:18 AM

IMO its a waste of time and money. it would be pretty cool but after a while it would get old.

06RedfireGT · August 2nd, 2007, 02:20 AM

and after lookin at the pics HMUSN posted you could mount it were the change holder is.

AnglicoGT98 · August 2nd, 2007, 07:31 AM

It should be a similar set up as a remote starter, and I have seen those on mustangs. You probably just wire into whatever wires run to the ignition or the starter and install the button almost like a swith, so when the car power is on you hit the button and it engages the starter just like if you were to turn the key. This is all speculation but if you find out how to do it, post it, I was interested in that mod as well.

neckbonekat · August 2nd, 2007, 02:06 PM

I saw a push start in a custom Mercedes once. No key needed. The guy had a chip that he carried in his wallet that when in close proximity to the car it will allow you to start the car. It also opens the door upon approaching the car. That was some pretty cool sh*t! Old rich guy and thier toys. Don't know what this has to do with your Stang.

AnglicoGT98 · August 2nd, 2007, 02:18 PM

They have that on alot of cars. The new Cadilac STS and CTS both have them as well as most of their SUV's. I think it's badass but would cost too much to put it in a mustang.

August 1st, 2007, 09:43 PM	#1
energiesource MM Fanatic Join Date: Oct 2006 Location: Up der in canada eh Posts: 3,527 iTrader: 1 reviews	99-04 push start? I know most of these are stupid and pointless but i was wondering if anyone knew of a push button ignition kit for a 99-00 or 01-04. Thanks __________________ 2000 Mustang GT, 417hp/421tq, P1SC @ 6 psi(?), Custom grind cams, Steeda Triax shifter, SLP LM2, MAC L/T and O/R H-pipe. 18x9/10 Flat Black FR500's, Mach C-pillars, bullitt side scoops/skirts.

August 1st, 2007, 09:44 PM	#2
White99stang MM's nicest mod, :) Join Date: Aug 2005 Location: Apex, NC Posts: 3,718 iTrader: 0 reviews	no there isn't one __________________ 06 Dodge MegaCab Diesel 455rwhp/815rwtq REAL TRUCKS DON'T USE SPARK PLUGS

August 1st, 2007, 09:49 PM	#3
HMUSN Doc 1986 SVO Join Date: Nov 2006 Posts: 36,836 iTrader: 9 reviews	but where there is money there is a way... __________________

August 1st, 2007, 09:51 PM	#4
energiesource MM Fanatic Join Date: Oct 2006 Location: Up der in canada eh Posts: 3,527 iTrader: 1 reviews	well there are the 05 kits, but to put it in any practical spot is impossible on our model unless you buy one of those gauge dash clusters and somehow put it into one of those. other than that, i wouldnt know __________________ 2000 Mustang GT, 417hp/421tq, P1SC @ 6 psi(?), Custom grind cams, Steeda Triax shifter, SLP LM2, MAC L/T and O/R H-pipe. 18x9/10 Flat Black FR500's, Mach C-pillars, bullitt side scoops/skirts.

August 1st, 2007, 09:51 PM	#5
HMUSN Doc 1986 SVO Join Date: Nov 2006 Posts: 36,836 iTrader: 9 reviews	dude.. drill a hole __________________

August 1st, 2007, 09:54 PM	#6
energiesource MM Fanatic Join Date: Oct 2006 Location: Up der in canada eh Posts: 3,527 iTrader: 1 reviews	lol yes but is there any practical place without tearing my dash up? no thats right..lol __________________ 2000 Mustang GT, 417hp/421tq, P1SC @ 6 psi(?), Custom grind cams, Steeda Triax shifter, SLP LM2, MAC L/T and O/R H-pipe. 18x9/10 Flat Black FR500's, Mach C-pillars, bullitt side scoops/skirts.

August 1st, 2007, 09:56 PM	#7
HMUSN Doc 1986 SVO Join Date: Nov 2006 Posts: 36,836 iTrader: 9 reviews	yea.. pout it right next to your cupholder or do what I did when I installed my nitrous.. hook it up to your shifter bezel.. it looks clean. __________________

August 1st, 2007, 09:58 PM	#8
HMUSN Doc 1986 SVO Join Date: Nov 2006 Posts: 36,836 iTrader: 9 reviews	__________________

August 1st, 2007, 10:09 PM	#9
energiesource MM Fanatic Join Date: Oct 2006 Location: Up der in canada eh Posts: 3,527 iTrader: 1 reviews	but i have the crappy interior aka 99-00 i really cant do shit with it, i wish i had a 2001 up dash __________________ 2000 Mustang GT, 417hp/421tq, P1SC @ 6 psi(?), Custom grind cams, Steeda Triax shifter, SLP LM2, MAC L/T and O/R H-pipe. 18x9/10 Flat Black FR500's, Mach C-pillars, bullitt side scoops/skirts.

August 1st, 2007, 10:12 PM	#10
HMUSN Doc 1986 SVO Join Date: Nov 2006 Posts: 36,836 iTrader: 9 reviews	you still have a shifter bezel dude. see where I drilled my 2 toggle switches for my nitrous? it looks good to me. __________________

August 1st, 2007, 10:16 PM	#11
energiesource MM Fanatic Join Date: Oct 2006 Location: Up der in canada eh Posts: 3,527 iTrader: 1 reviews	oh yeah i thought the newer shifter bezel had the buttons for the fog light and stuff in it, but thats the center part __________________ 2000 Mustang GT, 417hp/421tq, P1SC @ 6 psi(?), Custom grind cams, Steeda Triax shifter, SLP LM2, MAC L/T and O/R H-pipe. 18x9/10 Flat Black FR500's, Mach C-pillars, bullitt side scoops/skirts.

August 1st, 2007, 10:17 PM	#12
HMUSN Doc 1986 SVO Join Date: Nov 2006 Posts: 36,836 iTrader: 9 reviews	yup. DO IT __________________

August 1st, 2007, 10:21 PM	#13
energiesource MM Fanatic Join Date: Oct 2006 Location: Up der in canada eh Posts: 3,527 iTrader: 1 reviews	so do you gotta turn the key all the way and then push the button or what __________________ 2000 Mustang GT, 417hp/421tq, P1SC @ 6 psi(?), Custom grind cams, Steeda Triax shifter, SLP LM2, MAC L/T and O/R H-pipe. 18x9/10 Flat Black FR500's, Mach C-pillars, bullitt side scoops/skirts.

August 1st, 2007, 10:22 PM	#14
HMUSN Doc 1986 SVO Join Date: Nov 2006 Posts: 36,836 iTrader: 9 reviews	i dunno. ask someone who has one. __________________

August 2nd, 2007, 12:34 AM	#15
99spaded Regular Join Date: Jul 2007 Location: Las Vegas, Nevada Posts: 340 iTrader: 0 reviews	Well this is a popular mod for the dodge truck that are NOT the SRT 10, and it all depends on how you wire it, the guys that have done it to there truck on the dodge forum have it either way: Turn the key to the ON position then press the button to start and the key will also still start the truck, or make the button the only way you can start the truck!!! I have not seen one on our year mustangs though.....

August 2nd, 2007, 02:18 AM	#16
06RedfireGT One Man Wolf Pack 2006 Mustang GT 13ish....maybe Join Date: Aug 2006 Location: Regulatin On Some OGs Posts: 22,202 iTrader: 2 reviews	IMO its a waste of time and money. it would be pretty cool but after a while it would get old. __________________ ΜΟΛΩΝ ΛΑΒΕ

August 2nd, 2007, 02:20 AM	#17
06RedfireGT One Man Wolf Pack 2006 Mustang GT 13ish....maybe Join Date: Aug 2006 Location: Regulatin On Some OGs Posts: 22,202 iTrader: 2 reviews	and after lookin at the pics HMUSN posted you could mount it were the change holder is. __________________ ΜΟΛΩΝ ΛΑΒΕ

August 2nd, 2007, 07:31 AM	#18
AnglicoGT98 Enthusiast Join Date: Feb 2007 Location: Coral Springs, FL Posts: 630 iTrader: 2 reviews	It should be a similar set up as a remote starter, and I have seen those on mustangs. You probably just wire into whatever wires run to the ignition or the starter and install the button almost like a swith, so when the car power is on you hit the button and it engages the starter just like if you were to turn the key. This is all speculation but if you find out how to do it, post it, I was interested in that mod as well. __________________ Parting out 2003 SVT Cobra Air/Fuel http://www.moddedmustangs.com/forums...003-cobra.html Engine http://www.moddedmustangs.com/forums...003-cobra.html

August 2nd, 2007, 02:06 PM	#19
neckbonekat I Post Entirely Way Too Much 2005 Cadillac STS V8 ???????????????? Join Date: Dec 2006 Location: Upstate NY Posts: 6,344 iTrader: 3 reviews	I saw a push start in a custom Mercedes once. No key needed. The guy had a chip that he carried in his wallet that when in close proximity to the car it will allow you to start the car. It also opens the door upon approaching the car. That was some pretty cool sh*t! Old rich guy and thier toys. Don't know what this has to do with your Stang. __________________ ITEMS FOR SALE! 4.10 GEARS + BEARING KIT

August 2nd, 2007, 02:18 PM	#20
AnglicoGT98 Enthusiast Join Date: Feb 2007 Location: Coral Springs, FL Posts: 630 iTrader: 2 reviews	They have that on alot of cars. The new Cadilac STS and CTS both have them as well as most of their SUV's. I think it's badass but would cost too much to put it in a mustang. __________________ Parting out 2003 SVT Cobra Air/Fuel http://www.moddedmustangs.com/forums...003-cobra.html Engine http://www.moddedmustangs.com/forums...003-cobra.html

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: 99-04 push start?
Thread	Thread Starter	Forum	Replies	Last Post
will i have to change push rods?	Rustbelt	5.0 Mustangs	4	September 17th, 2007 01:56 AM
Push button start	Juggalo_X	V6 Mustangs	26	September 8th, 2007 01:51 AM
Well damn it...push the nine what you say....ya..ya..ya	WAR-PARTY	The Clubhouse	9	August 10th, 2007 10:34 PM
How far can you push Speed Density?	Darrellx14	5.0 Mustangs	12	February 22nd, 2007 11:53 PM
Push Rod quiestion?	Mustang8719	5.0 Mustangs	6	June 1st, 2006 11:45 PM

All times are GMT -4. The time now is 09:47 PM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.