About changing the stock pedals on an 04 mach...

Saleenwolf720 · August 14th, 2007, 10:28 PM

Hey guys, im tryin to put some saleen pedals in the mach and I'm havin a little issue. The brake and clutch pedal covers pop right off, but i don't know what to do about the gas pedal, it looks like one solid piece, how am i suppose to switch em? Has anybody tried this on a mach before? Thanks for any input.

Garhfer · August 14th, 2007, 10:30 PM

here's instructions on how to remove the stock pedals http://www.americanmuscle.com/bu.html

Saleenwolf720 · August 14th, 2007, 10:48 PM

ah, thanks man, I shouldn't have any problems now.

stanglifemike · August 14th, 2007, 10:52 PM

Just be patient because that pin can be tricky!

Saleenwolf720 · August 14th, 2007, 11:01 PM

lol, i'll try to be careful, hopefully i won't end up breakin some shit :wink

energiesource · August 14th, 2007, 11:05 PM

wtf do the saleen pedals look liike?

Saleenwolf720 · August 14th, 2007, 11:52 PM

Best pic I could find for now

I'll put a pic of em in my garage after they're installed and everything

weems · August 15th, 2007, 12:49 AM

are you making you car a saleen clone?

Saleenwolf720 · August 15th, 2007, 01:23 AM

Originally Posted by weems

are you making you car a saleen clone?

well, not really. I've got the body kit and a few interior pieces but thats it, I'm not really trying to make it a clone, i just like the way alot of the saleen stuff looks. I'm proud to be a mach 1 owner :wink

energiesource · August 15th, 2007, 09:20 AM

did you get the c-pillars too? lol ill buy your mach ones

neckbonekat · August 15th, 2007, 10:18 AM

Do they make Saleen SS rear bumper inserts? If so you could use them to go with the chrome wheels. I think it would look really good.

*edit*
I found them! Damn they are expensive for your car. They are only $30 for a Mustang.

Saleenwolf720 · August 15th, 2007, 10:48 AM

Originally Posted by energiesource

did you get the c-pillars too? lol ill buy your mach ones

haha, i kept the mach c-pillars

, I think they look badass.

Originally Posted by neckbonekat

Do they make Saleen SS rear bumper inserts? If so you could use them to go with the chrome wheels. I think it would look really good.

Its funny that u mention that because I did get those, from autobadges. I went out there to put em on and they don't fit the saleen indention, not even close. I'm still pissed about it, but I haven't gotten around to calling autobadges yet

.

neckbonekat · August 15th, 2007, 02:00 PM

Originally Posted by Saleenwolf720

Originally Posted by energiesource

did you get the c-pillars too? lol ill buy your mach ones

haha, i kept the mach c-pillars , I think they look badass.

Originally Posted by neckbonekat

Do they make Saleen SS rear bumper inserts? If so you could use them to go with the chrome wheels. I think it would look really good.

Its funny that u mention that because I did get those, from autobadges. I went out there to put em on and they don't fit the saleen indention, not even close. I'm still pissed about it, but I haven't gotten around to calling autobadges yet .

That sucks because they would look good with the black and chrome.

99spaded · August 15th, 2007, 02:28 PM

whats the difference in the c pillars??..

Saleenwolf720 · August 15th, 2007, 02:53 PM

Originally Posted by neckbonekat

That sucks because they would look good with the black and chrome.

Yea they would, I'll end up getting some that fit eventually.

And the difference between the c-pillars...

see?

Saleenwolf720 · August 15th, 2007, 03:22 PM

Finally got those pedals in, heres the finished product

HMUSN · August 15th, 2007, 03:23 PM

looks good

Saleenwolf720 · August 15th, 2007, 03:25 PM

Thanks :award

energiesource · August 15th, 2007, 08:51 PM

Originally Posted by 99spaded

whats the difference in the c pillars??..

stock gt/v6 ones just kinda curve down,
the bullitt, and mach 1 ones are more of a 90 degree angle type, and the saleen ones look basically like your a pillars but have a plastic cover in the area where your stock gt ones cover, doesn't really jive with any of the body at all, i hate the saleen ones.

these are the mach 1 ones, love them anyway

neckbonekat · August 15th, 2007, 09:45 PM

Originally Posted by energiesource

Originally Posted by 99spaded

whats the difference in the c pillars??..

stock gt/v6 ones just kinda curve down,
the bullitt, and mach 1 ones are more of a 90 degree angle type, and the saleen ones look basically like your a pillars but have a plastic cover in the area where your stock gt ones cover, doesn't really jive with any of the body at all, i hate the saleen ones.

these are the mach 1 ones, love them anyway

The Bullitt C-pillars don't have an opening. I don't catch bugs and dirt in mine.

August 14th, 2007, 10:28 PM	#1
Saleenwolf720 Regular 2004 Mach 1 Join Date: Mar 2007 Location: Knoxville, TN Posts: 356 iTrader: 0 reviews	About changing the stock pedals on an 04 mach... Hey guys, im tryin to put some saleen pedals in the mach and I'm havin a little issue. The brake and clutch pedal covers pop right off, but i don't know what to do about the gas pedal, it looks like one solid piece, how am i suppose to switch em? Has anybody tried this on a mach before? Thanks for any input. __________________ -David Origin- M.M Mach 1 Crew Member #6 www.myspace.com/Saleenwolf

August 14th, 2007, 10:30 PM	#2
Garhfer Hardcore Enthusiast 2004 Mustang GT Conv. Join Date: Mar 2007 Location: Edgewater, FL Posts: 1,793 iTrader: 0 reviews	here's instructions on how to remove the stock pedals http://www.americanmuscle.com/bu.html __________________ 2004 GT Boosted by Vortech

August 14th, 2007, 10:48 PM	#3
Saleenwolf720 Regular 2004 Mach 1 Join Date: Mar 2007 Location: Knoxville, TN Posts: 356 iTrader: 0 reviews	ah, thanks man, I shouldn't have any problems now. __________________ -David Origin- M.M Mach 1 Crew Member #6 www.myspace.com/Saleenwolf

August 14th, 2007, 10:52 PM	#4
stanglifemike IBEATU 06 GT, 98 GT, & 93 Notch Join Date: Dec 2006 Location: Douglasville, GA Posts: 5,937 iTrader: 0 reviews	Just be patient because that pin can be tricky! __________________ 98 GT: some stuff 06 GT: more stuff 93 Notch: 4 cyl at birth, now 5.0 drivetrain and stock exterior and interior= True Sleeper Paxton/Vortech Crew Member #3 FRPP's #1 Dealer Injected Engineering BMR Suspension

August 14th, 2007, 11:01 PM	#5
Saleenwolf720 Regular 2004 Mach 1 Join Date: Mar 2007 Location: Knoxville, TN Posts: 356 iTrader: 0 reviews	lol, i'll try to be careful, hopefully i won't end up breakin some shit :wink __________________ -David Origin- M.M Mach 1 Crew Member #6 www.myspace.com/Saleenwolf

August 14th, 2007, 11:05 PM	#6
energiesource MM Fanatic Join Date: Oct 2006 Location: Up der in canada eh Posts: 3,527 iTrader: 1 reviews	wtf do the saleen pedals look liike? __________________ 2000 Mustang GT, 417hp/421tq, P1SC @ 6 psi(?), Custom grind cams, Steeda Triax shifter, SLP LM2, MAC L/T and O/R H-pipe. 18x9/10 Flat Black FR500's, Mach C-pillars, bullitt side scoops/skirts.

August 14th, 2007, 11:52 PM	#7
Saleenwolf720 Regular 2004 Mach 1 Join Date: Mar 2007 Location: Knoxville, TN Posts: 356 iTrader: 0 reviews	Best pic I could find for now I'll put a pic of em in my garage after they're installed and everything __________________ -David Origin- M.M Mach 1 Crew Member #6 www.myspace.com/Saleenwolf

August 15th, 2007, 12:49 AM	#8
weems Tech Exchange Head Honcho 2003 SVT Cobra 11.70 @ 121 Join Date: Aug 2006 Location: Forsyth/Statesboro, GA Posts: 9,176 iTrader: 3 reviews	are you making you car a saleen clone?

August 15th, 2007, 09:20 AM	#10
energiesource MM Fanatic Join Date: Oct 2006 Location: Up der in canada eh Posts: 3,527 iTrader: 1 reviews	did you get the c-pillars too? lol ill buy your mach ones __________________ 2000 Mustang GT, 417hp/421tq, P1SC @ 6 psi(?), Custom grind cams, Steeda Triax shifter, SLP LM2, MAC L/T and O/R H-pipe. 18x9/10 Flat Black FR500's, Mach C-pillars, bullitt side scoops/skirts.

August 15th, 2007, 10:18 AM	#11
neckbonekat I Post Entirely Way Too Much 2005 Cadillac STS V8 ???????????????? Join Date: Dec 2006 Location: Upstate NY Posts: 6,344 iTrader: 3 reviews	Do they make Saleen SS rear bumper inserts? If so you could use them to go with the chrome wheels. I think it would look really good. edit I found them! Damn they are expensive for your car. They are only $30 for a Mustang. __________________ ITEMS FOR SALE! 4.10 GEARS + BEARING KIT

August 15th, 2007, 02:28 PM	#14
99spaded Regular Join Date: Jul 2007 Location: Las Vegas, Nevada Posts: 340 iTrader: 0 reviews	whats the difference in the c pillars??..

August 15th, 2007, 03:22 PM	#16
Saleenwolf720 Regular 2004 Mach 1 Join Date: Mar 2007 Location: Knoxville, TN Posts: 356 iTrader: 0 reviews	Finally got those pedals in, heres the finished product __________________ -David Origin- M.M Mach 1 Crew Member #6 www.myspace.com/Saleenwolf

August 15th, 2007, 03:23 PM	#17
HMUSN Doc 1986 SVO 48.47@ 12.58 Join Date: Nov 2006 Posts: 37,050 iTrader: 11 reviews	looks good __________________

August 15th, 2007, 03:25 PM	#18
Saleenwolf720 Regular 2004 Mach 1 Join Date: Mar 2007 Location: Knoxville, TN Posts: 356 iTrader: 0 reviews	Thanks :award __________________ -David Origin- M.M Mach 1 Crew Member #6 www.myspace.com/Saleenwolf

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: About changing the stock pedals on an 04 mach...
Thread	Thread Starter	Forum	Replies	Last Post
2 Kicker 10in Subs With Stock mach 460 hu	TyCouey2000GT	99-04	12	October 15th, 2007 07:17 PM
stock mach 1 block	Saleenwolf720	99-04	68	September 2nd, 2007 03:32 PM
1969 Mustang brake and clutch pedals	KeislerJeff	Classic Mustangs	3	August 30th, 2007 10:56 AM
Bullitt Pedals	MustangMatt96GT	96-98	21	May 26th, 2007 08:36 PM

All times are GMT -4. The time now is 03:32 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.