Gettin a S/C in about a year. A kenne bell or a centrifugal?

mustangmanic · August 20th, 2007, 08:22 PM

ok well in a year i'm gettin a s/c kit. I know the roots/twin screw's produce much more lower end TQ, and i kno that centri's are more in the upper rpms.

Heres my question. What would you guys get?
>2.1 KB full kit
>vortech mongoose kit
>procharger w/ intercooler
>or the novi 2000 kit

I'm just lookin for around 400-425 RWHP and it'll be daily driven.

HMUSN · August 20th, 2007, 08:22 PM

KB

Garhfer · August 20th, 2007, 08:29 PM

novi

bossman2kgt · August 20th, 2007, 08:33 PM

Like HMUSN said, kenne bell is the way to go however I went with the vortech v2 and liked that I could control the boost at low rpm. Besides 400+ hp is no problem pulley size is all. Good luck dude.

White99stang · August 20th, 2007, 08:45 PM

dude you have a year, no telling what might come out or what can happen. How about look into something you plan to get in a couple of weeks lol.

DrHolliday · August 20th, 2007, 08:48 PM

I vote KB..... for daily driving the neck snapping torque at any RPM is unreal.

BWAL · August 20th, 2007, 08:52 PM

Originally Posted by DrHolliday

I vote KB..... for daily driving the neck snapping torque at any RPM is unreal.

yeah, just look at DrHolliday's avatar for proof

DrHolliday · August 20th, 2007, 09:01 PM

Originally Posted by BWAL09

Originally Posted by DrHolliday

I vote KB..... for daily driving the neck snapping torque at any RPM is unreal.

yeah, just look at DrHolliday's avatar for proof

Hey, it was wet, oily, and I had bald tires. All that + KB = certain doom!

TheUNZippee! · August 20th, 2007, 09:02 PM

Take the stickers off it, DrH, Duh!

TheUNZippee! · August 20th, 2007, 09:03 PM

Oh and I vote KB.

droppedbass87 · August 20th, 2007, 09:06 PM

dont go novi man....procharger with intercooler or the kenne bell..those are ones i will be getting..and im rebuiling a project engine right now to handle 600 +...

mustangmanic · August 20th, 2007, 09:07 PM

so sir kenny seems to have the lead.

where can i find the cheapest complete kit?
i've checked MPH and its like 6,900... which might be a little more than i'm gonna be willing to spend, cuz i'm gonna need a tune and plus the installation.

2000stangGT · August 20th, 2007, 09:43 PM

i believe most kits come with a tune

and i vote kb

marcfiebka · August 20th, 2007, 09:45 PM

complete kit direct from kb is 5k plus install + dyno looking at around 7 gs after all is said and done

mattstang · August 20th, 2007, 09:46 PM

http://www.kennebell.net/
you can get kb direct from them

DrHolliday · August 20th, 2007, 10:19 PM

Originally Posted by mustangmanic

so sir kenny seems to have the lead.

where can i find the cheapest complete kit?
i've checked MPH and its like 6,900... which might be a little more than i'm gonna be willing to spend, cuz i'm gonna need a tune and plus the installation.

I bought dirrectly from KB. The 9 psi kit then got their CAI with 90mm MAF and after shipping to hawaii cost me 6,100. I used the KB chip and had it checked on a dyno. I was running rich but the KB tune works until you can save up for a dyno tune.

As for the install. If you can follow instructions and can change your oil/ spark plugs on your own you can install the KB. Its step by step and so easy a cave man can do it. ( copyright GEICO )

I'm still waiting to settle my claim to pull the KB off my car but I should have it pulled, cleaned and ready to sell some time in the next 2 weeks.

Only think wrong with mine is the intercooler needs repaired (shouldn't cost much at a radiator shop) and the K&N filter on it is jacked up. But I will have a complete kit for sale. I might even pull the whole ECU out of the car so if someone wanted to run on that ECU at least you know it will run a lil rich.

04GTAMPA · August 20th, 2007, 10:21 PM

Originally Posted by DrHolliday

Originally Posted by BWAL09

Originally Posted by DrHolliday

I vote KB..... for daily driving the neck snapping torque at any RPM is unreal.

yeah, just look at DrHolliday's avatar for proof

Hey, it was wet, oily, and I had bald tires. All that + KB = certain doom!

Don't let the insurance see this post...

HMUSN · August 20th, 2007, 10:23 PM

what kind of selling price you looking at Doc

DrHolliday · August 20th, 2007, 10:27 PM

Originally Posted by HMUSN

what kind of selling price you looking at Doc

Not sure yet. There's the price I want for it and then there's the price I can actually get for it.

It will def be under 4k. and it will be a more complete kit then what KB sells b/c I'll be sending it with a whole ECU and fuel rails, lol. Will probably even throw in my Fuel pressure guage, boost/vac guage and the bezzel.

HMUSN · August 20th, 2007, 10:29 PM

ok...just shoot me a PM with the thread when you decide to sell it :wink

August 20th, 2007, 08:22 PM	#1
mustangmanic MM Fanatic 2002 Mustang GT 13.334 @ 106.27 w/2.01 60' Join Date: May 2007 Location: Indianapolis Posts: 3,108 iTrader: 2 reviews	Gettin a S/C in about a year. A kenne bell or a centrifugal? ok well in a year i'm gettin a s/c kit. I know the roots/twin screw's produce much more lower end TQ, and i kno that centri's are more in the upper rpms. Heres my question. What would you guys get? >2.1 KB full kit >vortech mongoose kit >procharger w/ intercooler >or the novi 2000 kit I'm just lookin for around 400-425 RWHP and it'll be daily driven. __________________

August 20th, 2007, 08:22 PM	#2
HMUSN Doc 1986 SVO Join Date: Nov 2006 Posts: 36,836 iTrader: 9 reviews	KB __________________

August 20th, 2007, 08:29 PM	#3
Garhfer Hardcore Enthusiast 2004 Mustang GT Conv. Join Date: Mar 2007 Location: Edgewater, FL Posts: 1,790 iTrader: 0 reviews	novi __________________ 2004 GT Boosted by Vortech

August 20th, 2007, 08:45 PM	#5
White99stang MM's nicest mod, :) Join Date: Aug 2005 Location: Apex, NC Posts: 3,718 iTrader: 0 reviews	dude you have a year, no telling what might come out or what can happen. How about look into something you plan to get in a couple of weeks lol. __________________ 06 Dodge MegaCab Diesel 455rwhp/815rwtq REAL TRUCKS DON'T USE SPARK PLUGS

August 20th, 2007, 08:48 PM	#6
DrHolliday Enthusiast Join Date: Mar 2007 Location: New Port, NC Posts: 717 iTrader: 0 reviews	I vote KB..... for daily driving the neck snapping torque at any RPM is unreal. __________________ Mustangless atm 2006 2500 HD Diesel. Built allison trans and other goodies

August 20th, 2007, 08:33 PM	#4
bossman2kgt Hardcore Enthusiast Join Date: May 2007 Location: Wichita, Ks Posts: 1,287 iTrader: 0 reviews	Like HMUSN said, kenne bell is the way to go however I went with the vortech v2 and liked that I could control the boost at low rpm. Besides 400+ hp is no problem pulley size is all. Good luck dude.

August 20th, 2007, 09:02 PM	#9
TheUNZippee! Moderator Join Date: Jan 2007 Location: Canada Posts: 61,816 Blog Entries: 1 iTrader: 0 reviews	Take the stickers off it, DrH, Duh! __________________

August 20th, 2007, 09:03 PM	#10
TheUNZippee! Moderator Join Date: Jan 2007 Location: Canada Posts: 61,816 Blog Entries: 1 iTrader: 0 reviews	Oh and I vote KB. __________________

August 20th, 2007, 09:06 PM	#11
droppedbass87 Hardcore Enthusiast Join Date: Sep 2006 Location: diberville,mississippi Posts: 1,894 iTrader: 0 reviews	dont go novi man....procharger with intercooler or the kenne bell..those are ones i will be getting..and im rebuiling a project engine right now to handle 600 +... __________________ fraziers transmission service..

August 20th, 2007, 09:07 PM	#12
mustangmanic MM Fanatic 2002 Mustang GT 13.334 @ 106.27 w/2.01 60' Join Date: May 2007 Location: Indianapolis Posts: 3,108 iTrader: 2 reviews	so sir kenny seems to have the lead. where can i find the cheapest complete kit? i've checked MPH and its like 6,900... which might be a little more than i'm gonna be willing to spend, cuz i'm gonna need a tune and plus the installation. __________________

August 20th, 2007, 09:43 PM	#13
2000stangGT Enthusiast 2000 Mustang Gt 13.56 @ 106 Join Date: Jun 2006 Location: CT Posts: 806 iTrader: 0 reviews	i believe most kits come with a tune and i vote kb __________________ JLT - Accufab - MPH Heads - VT Stage 2 N/A cams Manley Valves/Springs - Centerforce Dual Friction BBK LT's - BBK o/r H - Bassani catback FRPP 4.10s - XCAL2 - BBK UDP's 306rwhp/333rwtq

August 20th, 2007, 09:45 PM	#14
marcfiebka Regular Join Date: Apr 2007 Posts: 196 iTrader: 0 reviews	complete kit direct from kb is 5k plus install + dyno looking at around 7 gs after all is said and done

August 20th, 2007, 09:46 PM	#15
mattstang Hardcore Enthusiast Join Date: May 2007 Posts: 1,762 iTrader: 1 reviews	http://www.kennebell.net/ you can get kb direct from them

August 20th, 2007, 10:23 PM	#18
HMUSN Doc 1986 SVO Join Date: Nov 2006 Posts: 36,836 iTrader: 9 reviews	what kind of selling price you looking at Doc __________________

August 20th, 2007, 10:29 PM	#20
HMUSN Doc 1986 SVO Join Date: Nov 2006 Posts: 36,836 iTrader: 9 reviews	ok...just shoot me a PM with the thread when you decide to sell it :wink __________________

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: Gettin a S/C in about a year. A kenne bell or a centrifugal?
Thread	Thread Starter	Forum	Replies	Last Post
Kenne bell vs. centrifugal vs. Turbo	hubba076	99-04	42	June 17th, 2007 01:48 AM
Kenne Bell On 2V?	GTSilver	99-04	14	October 14th, 2006 02:31 PM
Kenne Bell Going In!	VegasGT	2005 - 2010	15	October 9th, 2006 07:00 AM
kenne bell on a V6	itschristorres8	General Tech	3	August 30th, 2006 01:15 AM

All times are GMT -4. The time now is 09:34 PM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.