Chin spoiler

jblood37 · August 26th, 2007, 11:43 PM

I know alot of people have the chin spoiler, but I still think I'm going to order one this week. They're 99 bucks on americanmuscle right now! Does anyone have clearance problems with one on a car with lowering springs? I'm thinking no, but just figured I'd ask.

HMUSN · August 26th, 2007, 11:44 PM

nah.. it will fit with no issues.

RC02GT · August 26th, 2007, 11:47 PM

youll be fine, on lowered stangs the stock front bumper still sits high

neckbonekat · August 27th, 2007, 12:35 AM

Unless you get a 2" or more drop the only thing you have to look out for it pulling into parking spots with curb in front of it.

Drgnracin72 · August 27th, 2007, 11:13 AM

and ive seen it rip peoples bumpers off if they put the chin spoiler on it really well. so watch out for curbs, when i hit that racoon, it ripped my numper off, instead of just the chin spoiler. when installing dont use the supplied stuff. best bet is to go to ace hardware and get some bolts, washers and some nuts to fit. will be on there for good and wont go anywhere

B0B · August 27th, 2007, 01:37 PM

+1 on NOT using the supplied push screws or whatever the hell they are called. mine nearly fell off without me even hitting anything.. the wind will rip the screws out especially if you go over 70mph for an extended period of time.

neckbonekat · August 27th, 2007, 03:11 PM

Originally Posted by drgnracin72

and ive seen it rip peoples bumpers off if they put the chin spoiler on it really well. so watch out for curbs, when i hit that racoon, it ripped my numper off, instead of just the chin spoiler. when installing dont use the supplied stuff. best bet is to go to ace hardware and get some bolts, washers and some nuts to fit. will be on there for good and wont go anywhere

You know everyone says that about the stock body pins, but I've had mine on my car over a year and go over 100 MPH on a pretty regular basis, but I've never had a problem with them. Maybe people are drilling the holes too big because mine were a bitch to get in, but now that they are in I haven't had one issue. I had to use the top of a hammer to push them in. (not bang, but push) The only thing I did was the set came with only 3 and I went to Parts America and bought 3 more. If you look around your car they are what hold on your side molding on the bottom of your car and other body panels.

joejoe8455 · August 27th, 2007, 03:14 PM

just hit it with a lil poxy and you will be fine

HMUSN · August 27th, 2007, 03:15 PM

Originally Posted by joejoe8455

just hit it with a lil poxy and you will be fine

so that's how you do it huh?

neckbonekat · August 27th, 2007, 03:16 PM

Originally Posted by HMUSN

Originally Posted by joejoe8455

just hit it with a lil poxy and you will be fine

so that's how you do it huh?

Talk about a permenant fix!

mustangmanic · August 27th, 2007, 03:19 PM

i have a chinspoiler and mach one grill delete kit... it you get the chin spoiler, the grill delete goes really well with it and really compliments.

on the clearance issues, yes i have some. I have Eibach sportlines lowered 2.5'' and i avoid inclined driveways, getting too close to parking curbs, and any potholes, i also go try to hit big speedbumps at an angle just becuase my exhuast will scrape too.

joejoe8455 · August 27th, 2007, 03:20 PM

Originally Posted by HMUSN

Originally Posted by joejoe8455

just hit it with a lil poxy and you will be fine

so that's how you do it huh?

im a redneck so thats a step above duct tape

HMUSN · August 27th, 2007, 03:22 PM

not work safe

neckbonekat · August 27th, 2007, 03:30 PM

Originally Posted by joejoe8455

Originally Posted by HMUSN

Originally Posted by joejoe8455

just hit it with a lil poxy and you will be fine

so that's how you do it huh?

im a redneck so thats a step above duct tape

OhhShorty · August 27th, 2007, 04:23 PM

Originally Posted by HMUSN

not work safe

i shoulda known not to click on that at work... good thing i got quick clicks

joejoe8455 · August 27th, 2007, 04:33 PM

Originally Posted by HMUSN

not work safe

you have issues man

HMUSN · August 27th, 2007, 05:18 PM

OhhShorty · August 27th, 2007, 05:22 PM

gotta depend on u to come up wit the random crazy pix

HMUSN · August 27th, 2007, 05:27 PM

it's what I do

neckbonekat · August 27th, 2007, 05:58 PM

Originally Posted by HMUSN

it's what I do

Tue, true!

August 26th, 2007, 11:43 PM	#1
jblood37 Regular 2000 Mustang GT Join Date: Nov 2006 Location: Hartselle, AL Posts: 221 iTrader: 0 reviews	Chin spoiler I know alot of people have the chin spoiler, but I still think I'm going to order one this week. They're 99 bucks on americanmuscle right now! Does anyone have clearance problems with one on a car with lowering springs? I'm thinking no, but just figured I'd ask.

August 26th, 2007, 11:44 PM	#2
HMUSN Doc 1986 SVO Join Date: Nov 2006 Posts: 36,836 iTrader: 9 reviews	nah.. it will fit with no issues. __________________

August 26th, 2007, 11:47 PM	#3
RC02GT Hardcore Enthusiast 2006 Saleen s/c Join Date: Sep 2006 Location: Baltimore, MD Posts: 1,128 iTrader: 0 reviews	youll be fine, on lowered stangs the stock front bumper still sits high __________________ 06 Saleen s281: 3.4 pulley, 39lb inj. KB BAP, steeda cai, steeda belt tensioner, saleen extreme inlet tube, bassani x, magnaflow, MGW, brenspeed tune

August 27th, 2007, 12:35 AM	#4
neckbonekat I Post Entirely Way Too Much 2005 Cadillac STS V8 ???????????????? Join Date: Dec 2006 Location: Upstate NY Posts: 6,344 iTrader: 3 reviews	Unless you get a 2" or more drop the only thing you have to look out for it pulling into parking spots with curb in front of it. __________________ ITEMS FOR SALE! 4.10 GEARS + BEARING KIT

August 27th, 2007, 11:13 AM	#5
Drgnracin72 I Post Entirely Way Too Much Join Date: Jan 2006 Location: somewhere in oklahoma Posts: 10,638 iTrader: 2 reviews	and ive seen it rip peoples bumpers off if they put the chin spoiler on it really well. so watch out for curbs, when i hit that racoon, it ripped my numper off, instead of just the chin spoiler. when installing dont use the supplied stuff. best bet is to go to ace hardware and get some bolts, washers and some nuts to fit. will be on there for good and wont go anywhere __________________ RIP ΜΟΛΩΝ ΛΑΒΕ Political Correctness is a doctrine, fostered by a delusional, illogical, liberal minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end. One Big Ass Mistake America SHEEPDOGS

August 27th, 2007, 01:37 PM	#6
B0B Boost gets you laid 2001 Mustang GT 12.93@113.7 (on the 18's) Join Date: Dec 2006 Location: Milton, WA Posts: 2,601 iTrader: 2 reviews	+1 on NOT using the supplied push screws or whatever the hell they are called. mine nearly fell off without me even hitting anything.. the wind will rip the screws out especially if you go over 70mph for an extended period of time. __________________ '01 GT. Just a couple Bolt-ons. 0rwhp 0rwtq. Epic Turbo build in progress 2003 Rubicon (wheelin rig) 2008 Silverado 4x4 (towin rig/road queen) 2009 KTM 450 XC-W (Brap Brap!)

August 27th, 2007, 03:14 PM	#8
joejoe8455 I Try To Get With My Friends Wives 00 Mustang GT No Damn Clue Join Date: May 2007 Location: Williamsburg, VA Posts: 707 iTrader: 0 reviews	just hit it with a lil poxy and you will be fine __________________ 2000 Mustang GT - 4.10's, Mac Prochamber, Flowmaster 44's, SCT2 Tuner Tuned @ http://www.dtpracing.com/ Yes me and Tiller are BFF's

August 27th, 2007, 03:19 PM	#11
mustangmanic MM Fanatic 2002 Mustang GT 13.334 @ 106.27 w/2.01 60' Join Date: May 2007 Location: Indianapolis Posts: 3,108 iTrader: 2 reviews	i have a chinspoiler and mach one grill delete kit... it you get the chin spoiler, the grill delete goes really well with it and really compliments. on the clearance issues, yes i have some. I have Eibach sportlines lowered 2.5'' and i avoid inclined driveways, getting too close to parking curbs, and any potholes, i also go try to hit big speedbumps at an angle just becuase my exhuast will scrape too. __________________

August 27th, 2007, 03:22 PM	#13
HMUSN Doc 1986 SVO Join Date: Nov 2006 Posts: 36,836 iTrader: 9 reviews	not work safe __________________

August 27th, 2007, 05:18 PM	#17
HMUSN Doc 1986 SVO Join Date: Nov 2006 Posts: 36,836 iTrader: 9 reviews	__________________

August 27th, 2007, 05:22 PM	#18
OhhShorty Regular 1995 Mustang GT Vert Join Date: May 2007 Location: Jacksonville, NC Posts: 293 iTrader: 0 reviews	gotta depend on u to come up wit the random crazy pix __________________ "For I have made mistakes, which made me a better man, I will forever believe that you can live with NoRegretz" '95 5.0L Vert www.wotmustang.com MILITARY CREW E-5

August 27th, 2007, 05:27 PM	#19
HMUSN Doc 1986 SVO Join Date: Nov 2006 Posts: 36,836 iTrader: 9 reviews	it's what I do __________________

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: Chin spoiler
Thread	Thread Starter	Forum	Replies	Last Post
98 chin spoiler...	AnglicoGT98	96-98	7	September 5th, 2007 06:17 AM
chin spoiler...	Nick_Rapitis	V6 Mustangs	12	August 29th, 2007 04:56 PM
CHIN SPOILER HELP!!!	Jeff99gt	99-04	6	January 4th, 2007 01:22 PM
94-98 chin spoiler	98mustang	Visual	16	March 28th, 2006 11:36 AM

All times are GMT -4. The time now is 07:07 PM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.