Blower cam on N/A

TheBusher · August 31st, 2007, 05:00 PM

I eventually want to get a blower down the road, but right now I severely lack the funds to get one at the moment, but I was also thinking about getting a cam. Now I've heard that putting a blower cam on a N/A engine can hurt your performance. I've also heard some people say, to people with the same plan as me, that they should get a blower cam now and then get the blower later down the road when it's affordable.

So what's the deal... is a blower cam on a N/A engine good or bad???

MustangMatt96GT · August 31st, 2007, 05:04 PM

you may not make potenial power until the blower gets on there, but it should be fine!

neckbonekat · August 31st, 2007, 05:11 PM

Originally Posted by MustangMatt96GT

you may not make potenial power until the blower gets on there, but it should be fine!

+1
The cams will not be as effective as they should until you get the blower.

TheBusher · August 31st, 2007, 05:15 PM

Hey matt, is that you're car in that pic???

MustangMatt96GT · August 31st, 2007, 05:16 PM

Yeah

http://www.moddedmustangs.com/forums...l-vt35402.html

TheBusher · August 31st, 2007, 05:20 PM

Originally Posted by MustangMatt96GT

Yeah

http://www.moddedmustangs.com/forums...l-vt35402.html

Nice, those tires make it look like might be pretty nasty. What kinda power you puttin' down???

HMUSN · August 31st, 2007, 05:21 PM

not enough

MustangMatt96GT · August 31st, 2007, 05:21 PM

192.5 RWHP and 230.0 RWTQ

I just got them put on today! I got them yesterday from UPS and today I went to performance wheel and tire and got the rear ET Streets Replaced. I cant wait to make a few passes with them on Monday at the highschool drags!

MustangMatt96GT · August 31st, 2007, 05:22 PM

Originally Posted by HMUSN

not enough

Soon to be around 300 though N/A

HMUSN · August 31st, 2007, 05:22 PM

what's n/a ?

MustangMatt96GT · August 31st, 2007, 05:25 PM

u and that boost

HMUSN · August 31st, 2007, 05:27 PM

August 31st, 2007, 05:00 PM	#1
TheBusher Hardcore Enthusiast 2002 Chevrolet Impala ??? Join Date: Jul 2007 Location: Fort Collins, Colorado Posts: 2,242 iTrader: 0 reviews	Blower cam on N/A I eventually want to get a blower down the road, but right now I severely lack the funds to get one at the moment, but I was also thinking about getting a cam. Now I've heard that putting a blower cam on a N/A engine can hurt your performance. I've also heard some people say, to people with the same plan as me, that they should get a blower cam now and then get the blower later down the road when it's affordable. So what's the deal... is a blower cam on a N/A engine good or bad???

August 31st, 2007, 05:04 PM	#2
MustangMatt96GT Proud American 1996 Mustang GT 10.76 @ 122 with d/a of 8365 ft Join Date: Dec 2006 Location: Lakewood, CO Posts: 10,168 iTrader: 3 reviews	you may not make potenial power until the blower gets on there, but it should be fine! __________________ RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions Blown Small Block Ford with a hole in the block. 9.5 Dart Block 400 CI being saved for. Just because you can fuck a cactus doesn't mean you should. Never Lift Racecars

August 31st, 2007, 05:16 PM	#5
MustangMatt96GT Proud American 1996 Mustang GT 10.76 @ 122 with d/a of 8365 ft Join Date: Dec 2006 Location: Lakewood, CO Posts: 10,168 iTrader: 3 reviews	Yeah http://www.moddedmustangs.com/forums...l-vt35402.html __________________ RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions Blown Small Block Ford with a hole in the block. 9.5 Dart Block 400 CI being saved for. Just because you can fuck a cactus doesn't mean you should. Never Lift Racecars

August 31st, 2007, 05:21 PM	#7
HMUSN Doc 1986 SVO Join Date: Nov 2006 Posts: 36,836 iTrader: 9 reviews	not enough __________________

August 31st, 2007, 05:21 PM	#8
MustangMatt96GT Proud American 1996 Mustang GT 10.76 @ 122 with d/a of 8365 ft Join Date: Dec 2006 Location: Lakewood, CO Posts: 10,168 iTrader: 3 reviews	192.5 RWHP and 230.0 RWTQ I just got them put on today! I got them yesterday from UPS and today I went to performance wheel and tire and got the rear ET Streets Replaced. I cant wait to make a few passes with them on Monday at the highschool drags! __________________ RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions Blown Small Block Ford with a hole in the block. 9.5 Dart Block 400 CI being saved for. Just because you can fuck a cactus doesn't mean you should. Never Lift Racecars

August 31st, 2007, 05:15 PM	#4
TheBusher Hardcore Enthusiast 2002 Chevrolet Impala ??? Join Date: Jul 2007 Location: Fort Collins, Colorado Posts: 2,242 iTrader: 0 reviews	Hey matt, is that you're car in that pic???

August 31st, 2007, 05:22 PM	#10
HMUSN Doc 1986 SVO Join Date: Nov 2006 Posts: 36,836 iTrader: 9 reviews	what's n/a ? __________________

August 31st, 2007, 05:25 PM	#11
MustangMatt96GT Proud American 1996 Mustang GT 10.76 @ 122 with d/a of 8365 ft Join Date: Dec 2006 Location: Lakewood, CO Posts: 10,168 iTrader: 3 reviews	u and that boost __________________ RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions Blown Small Block Ford with a hole in the block. 9.5 Dart Block 400 CI being saved for. Just because you can fuck a cactus doesn't mean you should. Never Lift Racecars

August 31st, 2007, 05:27 PM	#12
HMUSN Doc 1986 SVO Join Date: Nov 2006 Posts: 36,836 iTrader: 9 reviews	__________________

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: Blower cam on N/A
Thread	Thread Starter	Forum	Replies	Last Post
Looking for a 6-8 lb. blower?	bossman2kgt	99-04	4	September 8th, 2008 10:51 PM
N/A Cam and Blower Cam ???	StuTheMusicEngineer	99-04	1	March 3rd, 2007 05:35 AM
Blower	justinsstang	General Tech	11	March 1st, 2007 11:19 PM
which blower	342stroker	General Tech	2	February 14th, 2007 07:20 AM
Blower is on car!	cooktheworld	5.0 Mustangs	3	December 19th, 2006 02:26 PM

All times are GMT -4. The time now is 07:33 PM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.