Rotating Assembly

J Mac0123 · September 29th, 2007, 11:36 AM

Well, the motor finaly gave out. Been looking around at different forged rotating assembly's and they all seem to be right around the same price range (1600-2000) so i was just wondering if there is one company better than others or more recomended. Maybe one not recomended ? Any help and suggestions are appretiated. Thanx A lot.

00vabchgt · September 29th, 2007, 11:42 AM

i went with a forged rotating assembly from VT.
here's the link http://www.vtengines.com/store/index...oducts_id=1333
that's what i went with. the pistons are 0.020" overbore and are dished 19cc's since i plan on throwing a centri blower on it. i also pais the $200.00 to have it balanced.
what happened to your old motor? i spun a rod bearing in my 2000

J Mac0123 · September 29th, 2007, 11:46 AM

one of my cylinders has bad compression and one of my piston heads hit the bottom of my spark plug. I want to get this done anyway so i can run a little more boost but keep it "safe" I am getting a beefier clutch as well any suggestions ? how much HP should i be able to handle after this, im only going want say 460 RWHP cause this is my DD for now.

00vabchgt · September 29th, 2007, 11:50 AM

the best thing to do is probably to call Scott at VT and talk to him. tell him what your plans for the car are and he'll be able to steer you in the right direction. i talked to him about what size dish to go with for the pistons cause i wasn't sure. as for clutches, i hear a lot of good things about the Centerforce Dual Friction and Spec also. i'm running a King Cobra, but i'm also nowhere near your rwhp lol. and the FRA from VT will easily handle 460rwhp

brianm · September 29th, 2007, 12:05 PM

the centerforce dual friction is a good product, and should handle your power

J Mac0123 · September 29th, 2007, 12:18 PM

Hey brianm, another member from Red Deer, cool. Dont know if i have seen you around ?

drgnracin72 · September 29th, 2007, 02:51 PM

livernoise is good stuff give them a call. very well priced also

brianm · September 29th, 2007, 04:39 PM

i don't think so i move here about a year ago. i am always out and about 03 silver gt with tinted windows

.

J Mac0123 · September 30th, 2007, 02:23 AM

Thanx drgn, well if i see ya out and about we'll have to stop for a sec and chat.

1slowsohc · October 2nd, 2007, 04:47 PM

VT and MMR ... im dealing with MMR right now, they are great always got answers for my questions and they build a strong motor...never delt with VT but heard they were great, and as for livernois i heard its hit or miss, good luck with the set up

J Mac0123 · October 2nd, 2007, 08:30 PM

thanx man.

WAR-PARTY · October 2nd, 2007, 09:00 PM

Originally Posted by drgnracin72

livernoise is good stuff give them a call. very well priced also

I have a DSS built long block, I'm very hapy with they way they treated me. VT is a wonderful vendor I have done som business with them and again very happy, ut the are way under staffed. Livernoise is running some very hot Stangs. But at the top of my list is MMR they onw the 8 sec five speed Stand and a 2k modular stang! I do business with them too. Very cool!
http://www.modularmustangracing.com/

J Mac0123 · October 2nd, 2007, 09:02 PM

thanx for the info, the more the better. Sounds like i may have to give MMR a call.

1slowsohc · October 3rd, 2007, 01:07 PM

+1 mmr they will take care of you

September 29th, 2007, 11:36 AM	#1
J Mac0123 Regular Join Date: Oct 2006 Posts: 200	Rotating Assembly Well, the motor finaly gave out. Been looking around at different forged rotating assembly's and they all seem to be right around the same price range (1600-2000) so i was just wondering if there is one company better than others or more recomended. Maybe one not recomended ? Any help and suggestions are appretiated. Thanx A lot. __________________ Black 03 GT SLP LM1 exhaust Hellion 62mm Turbo Kit 405 RWHP--458 RWTQ Stock LOOKING.... http://i8.photobucket.com/albums/a31...odhatesyou.jpg

September 29th, 2007, 11:42 AM	#2
00vabchgt MM Fanatic 2000 Mustang GT Join Date: Nov 2006 Location: Virginia Beach, VA Posts: 3,879	i went with a forged rotating assembly from VT. here's the link http://www.vtengines.com/store/index...oducts_id=1333 that's what i went with. the pistons are 0.020" overbore and are dished 19cc's since i plan on throwing a centri blower on it. i also pais the $200.00 to have it balanced. what happened to your old motor? i spun a rod bearing in my 2000 __________________ Submariners Do It Deeper

September 29th, 2007, 11:46 AM	#3
J Mac0123 Regular Join Date: Oct 2006 Posts: 200	one of my cylinders has bad compression and one of my piston heads hit the bottom of my spark plug. I want to get this done anyway so i can run a little more boost but keep it "safe" I am getting a beefier clutch as well any suggestions ? how much HP should i be able to handle after this, im only going want say 460 RWHP cause this is my DD for now. __________________ Black 03 GT SLP LM1 exhaust Hellion 62mm Turbo Kit 405 RWHP--458 RWTQ Stock LOOKING.... http://i8.photobucket.com/albums/a31...odhatesyou.jpg

September 29th, 2007, 11:50 AM	#4
00vabchgt MM Fanatic 2000 Mustang GT Join Date: Nov 2006 Location: Virginia Beach, VA Posts: 3,879	the best thing to do is probably to call Scott at VT and talk to him. tell him what your plans for the car are and he'll be able to steer you in the right direction. i talked to him about what size dish to go with for the pistons cause i wasn't sure. as for clutches, i hear a lot of good things about the Centerforce Dual Friction and Spec also. i'm running a King Cobra, but i'm also nowhere near your rwhp lol. and the FRA from VT will easily handle 460rwhp __________________ Submariners Do It Deeper

September 29th, 2007, 12:05 PM	#5
brianm Regular Join Date: Sep 2007 Location: red deer alberta (canada) Posts: 140	the centerforce dual friction is a good product, and should handle your power __________________ silver 03 gt not stock

September 29th, 2007, 12:18 PM	#6
J Mac0123 Regular Join Date: Oct 2006 Posts: 200	Hey brianm, another member from Red Deer, cool. Dont know if i have seen you around ? __________________ Black 03 GT SLP LM1 exhaust Hellion 62mm Turbo Kit 405 RWHP--458 RWTQ Stock LOOKING.... http://i8.photobucket.com/albums/a31...odhatesyou.jpg

September 29th, 2007, 04:39 PM	#8
brianm Regular Join Date: Sep 2007 Location: red deer alberta (canada) Posts: 140	i don't think so i move here about a year ago. i am always out and about 03 silver gt with tinted windows . __________________ silver 03 gt not stock

September 30th, 2007, 02:23 AM	#9
J Mac0123 Regular Join Date: Oct 2006 Posts: 200	Thanx drgn, well if i see ya out and about we'll have to stop for a sec and chat. __________________ Black 03 GT SLP LM1 exhaust Hellion 62mm Turbo Kit 405 RWHP--458 RWTQ Stock LOOKING.... http://i8.photobucket.com/albums/a31...odhatesyou.jpg

October 2nd, 2007, 04:47 PM	#10
1slowsohc Newbie Join Date: Sep 2007 Location: baltimore, md Posts: 24	VT and MMR ... im dealing with MMR right now, they are great always got answers for my questions and they build a strong motor...never delt with VT but heard they were great, and as for livernois i heard its hit or miss, good luck with the set up

October 2nd, 2007, 08:30 PM	#11
J Mac0123 Regular Join Date: Oct 2006 Posts: 200	thanx man. __________________ Black 03 GT SLP LM1 exhaust Hellion 62mm Turbo Kit 405 RWHP--458 RWTQ Stock LOOKING.... http://i8.photobucket.com/albums/a31...odhatesyou.jpg

October 2nd, 2007, 09:02 PM	#13
J Mac0123 Regular Join Date: Oct 2006 Posts: 200	thanx for the info, the more the better. Sounds like i may have to give MMR a call. __________________ Black 03 GT SLP LM1 exhaust Hellion 62mm Turbo Kit 405 RWHP--458 RWTQ Stock LOOKING.... http://i8.photobucket.com/albums/a31...odhatesyou.jpg

October 3rd, 2007, 01:07 PM	#14
1slowsohc Newbie Join Date: Sep 2007 Location: baltimore, md Posts: 24	+1 mmr they will take care of you

Threads Similar to: Rotating Assembly
Thread	Thread Starter	Forum	Replies	Last Post
Rotating Assembly?	lethal2v	96-98	36	January 31st, 2008 05:15 PM
D.S.S Racing 4.6 Super Modular Rotating Assembly	Vabeachmustang	For Sale	22	December 30th, 2007 01:17 PM
Install price for rotating assembly	Saleenwolf720	99-04	2	October 8th, 2007 04:21 PM
Rotating Assembly on an 03' GT	hubba076	99-04	1	May 16th, 2007 02:34 AM
FS: Rotating Assembly w/other items	68 dlxcoupe	For Sale	0	September 12th, 2006 01:22 PM

All times are GMT -4. The time now is 02:39 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.