Funny noise and jerking...

TheBusher · October 26th, 2007, 11:36 AM

I recently had some work done on my car by Ford (replaced clutch, throw out bearing, & resurfaced flywheel). And now my car makes a buzzing sound, that seems to some from the drive train, when it's cold and when I accelerate at low rpms (1200 and below). Also when I accelerate slightly aggressively around a turn, not enough to get any spin though, my car makes a small jerk... it almost feels like my tires were barely spinning and then caught traction but I know they are not spinning. Are these two problems related??? I will be taking my car back to Ford so they can fix it, but I would like to know if the work they did can cause this issue so they will have to fix it, or if I'm gonna have to get ready to replace something and what I will have to replace.

pa.ulB · October 26th, 2007, 03:40 PM

the clutch might be slipping??? i have no clue.

TheBusher · October 31st, 2007, 02:13 PM

Originally Posted by pa.ulB

the clutch might be slipping??? i have no clue.

My clutch is only 2000 miles old, and the pressure plate, and the throwout bearing, and my flywheel was resurfaced. The noise almost sounds like somethings loose. Like metal buzzing against metal. It's not outrageously loud def noticable.

WAR-PARTY · October 31st, 2007, 03:41 PM

Pilot bearing..... Trans not alinged properly into the bell housing

TheUNZippee! · October 31st, 2007, 03:43 PM

:homo

WAR-PARTY · October 31st, 2007, 04:08 PM

^ lick me!

TheUNZippee! · October 31st, 2007, 04:08 PM

In public?

Perv!

TheBusher · October 31st, 2007, 06:36 PM

Originally Posted by WAR-PARTY

Pilot bearing..... Trans not alinged properly into the bell housing

GAY!!! I'm goin' back to Ford an telling them to fix my shit. Thanks for the help guys!

energiesource · October 31st, 2007, 07:25 PM

the topic sounds like my friday night lol

TheBusher · October 31st, 2007, 07:35 PM

Originally Posted by energiesource

the topic sounds like my friday night lol

October 26th, 2007, 11:36 AM	#1
TheBusher Hardcore Enthusiast 2002 Chevrolet Impala ??? Join Date: Jul 2007 Location: Fort Collins, Colorado Posts: 2,241 iTrader: 0 reviews	Funny noise and jerking... I recently had some work done on my car by Ford (replaced clutch, throw out bearing, & resurfaced flywheel). And now my car makes a buzzing sound, that seems to some from the drive train, when it's cold and when I accelerate at low rpms (1200 and below). Also when I accelerate slightly aggressively around a turn, not enough to get any spin though, my car makes a small jerk... it almost feels like my tires were barely spinning and then caught traction but I know they are not spinning. Are these two problems related??? I will be taking my car back to Ford so they can fix it, but I would like to know if the work they did can cause this issue so they will have to fix it, or if I'm gonna have to get ready to replace something and what I will have to replace.

October 26th, 2007, 03:40 PM	#2
pa.ulB Regular 2004 GT slow.... Join Date: Nov 2006 Location: PA Posts: 415 iTrader: 0 reviews	the clutch might be slipping??? i have no clue. __________________ 2004 Crimson red GT saleen s/c, full bolt ons

October 31st, 2007, 03:41 PM	#4
WAR-PARTY Hardcore Enthusiast 2001 YUGO GT Join Date: Aug 2006 Location: GOAT LOCKER PENSACOLA FL Posts: 1,700 Blog Entries: 1 iTrader: 0 reviews	Pilot bearing..... Trans not alinged properly into the bell housing __________________ How I met my wife! Our first date...

October 31st, 2007, 04:08 PM	#6
WAR-PARTY Hardcore Enthusiast 2001 YUGO GT Join Date: Aug 2006 Location: GOAT LOCKER PENSACOLA FL Posts: 1,700 Blog Entries: 1 iTrader: 0 reviews	^ lick me! __________________ How I met my wife! Our first date...

October 31st, 2007, 07:25 PM	#9
energiesource MM Fanatic Join Date: Oct 2006 Location: Up der in canada eh Posts: 3,527 iTrader: 1 reviews	the topic sounds like my friday night lol __________________ 2000 Mustang GT, 417hp/421tq, P1SC @ 6 psi(?), Custom grind cams, Steeda Triax shifter, SLP LM2, MAC L/T and O/R H-pipe. 18x9/10 Flat Black FR500's, Mach C-pillars, bullitt side scoops/skirts.

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: Funny noise and jerking...
Thread	Thread Starter	Forum	Replies	Last Post
Funny squeeky noise?	sorrowfulkiller	96-98	5	October 8th, 2007 11:21 PM
Funny noise with trac control under accel...	mustangmanic	99-04	3	July 29th, 2007 03:39 AM
Funny noise	shadow98gt	Modular Mustangs	4	April 27th, 2007 03:56 PM
Funny Noise From Engine With Blower	troy1000rr	5.0 Mustangs	6	November 7th, 2006 02:44 PM
Jerking back & forth	pinkthing	General Tech	10	August 22nd, 2006 02:41 PM

All times are GMT -4. The time now is 03:10 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.