BBK X pipe came in and...

November 24th, 2007, 01:38 PM	#1
RC02GT Enthusiast 2002 Mustang GT Join Date: Sep 2006 Location: Baltimore, MD Posts: 971	BBK X pipe came in and... I have a question, Theres 4 places for sensors on it, I didnt know it used that many, does it or will I need plugs? __________________ BBK CAI, BBK shortys, BBK x pipe, Flow's, MGW shifter

November 24th, 2007, 01:40 PM	#2
HMUSN Doc 91 Sonic Blue Goodness 19.83 @ 12mph Join Date: Nov 2006 Location: NJ Posts: 27,311	it is a catted pipe or off road pipe?

November 24th, 2007, 01:43 PM	#3
RC02GT Enthusiast 2002 Mustang GT Join Date: Sep 2006 Location: Baltimore, MD Posts: 971	catted __________________ BBK CAI, BBK shortys, BBK x pipe, Flow's, MGW shifter

November 24th, 2007, 01:44 PM	#4
HMUSN Doc 91 Sonic Blue Goodness 19.83 @ 12mph Join Date: Nov 2006 Location: NJ Posts: 27,311	then yes it should have 4 connectors.

November 24th, 2007, 01:44 PM	#5
SWEET2KSTANG MM Fanatic 2000 mustang gt 11.79@115.83 Join Date: Oct 2006 Location: N.W. AR Posts: 4,859	its normal, car has a set of front o2 sensors, and a set after the cats. if no cats, the rears need to be turned off. or use a set of mil eliminators for the rears. __________________ stock long block, bolt ons, slicks, and a little squeeze N/A-12.81@103.7 N2O-11.79@115.8 Only two defining forces have ever offered to die for you: 1. Jesus Christ 2. The American G. I. One died for your soul, the other for your freedom.

November 24th, 2007, 01:45 PM	#6
RC02GT Enthusiast 2002 Mustang GT Join Date: Sep 2006 Location: Baltimore, MD Posts: 971	alright just making sure, and i have the bbk headers sitting here to, just one sensor there right? __________________ BBK CAI, BBK shortys, BBK x pipe, Flow's, MGW shifter

November 24th, 2007, 01:45 PM	#7
HMUSN Doc 91 Sonic Blue Goodness 19.83 @ 12mph Join Date: Nov 2006 Location: NJ Posts: 27,311	yup.

November 24th, 2007, 01:48 PM	#8
RC02GT Enthusiast 2002 Mustang GT Join Date: Sep 2006 Location: Baltimore, MD Posts: 971	alright cool, I would start the install but the bolts and gaskets arent in yet! __________________ BBK CAI, BBK shortys, BBK x pipe, Flow's, MGW shifter

January 14th, 2008, 01:52 PM	#9
uatlb Regular 00 gt Join Date: Nov 2007 Location: boston Posts: 203	how u make out with the install??? __________________ 00gt shitbox www.bostonstangs.com

January 14th, 2008, 10:55 PM	#10
RC02GT Enthusiast 2002 Mustang GT Join Date: Sep 2006 Location: Baltimore, MD Posts: 971	Well I had a driver side leak, I never dropped the k member which made it a HUGE PITA so I couldnt get one bolt tight, It took longer than I expected, no lift, didnt touch the K, only jacked the motor up a tad, it was not fun but I can feel a difference with the shorty's and x. I should have put the x on, road around and feel the difference, than put the headers on so see if they do anything, but combined I feel a difference. __________________ BBK CAI, BBK shortys, BBK x pipe, Flow's, MGW shifter

January 14th, 2008, 11:45 PM

#11

neckbonekat

I Post Entirely Way Too Much

Join Date: Dec 2006

Location: Upstate NY

Posts: 6,014

Originally Posted by RC02GT

Well I had a driver side leak, I never dropped the k member which made it a HUGE PITA so I couldnt get one bolt tight, It took longer than I expected, no lift, didnt touch the K, only jacked the motor up a tad, it was not fun but I can feel a difference with the shorty's and x. I should have put the x on, road around and feel the difference, than put the headers on so see if they do anything, but combined I feel a difference.

You could always take the headers off and put the stock ones back on to do the comparison.

__________________

2001 BULLITT GT

I DON'T CARE WHERE THE CAR IS MADE. IF YOU CAN'T BEAT IT DON'T TALK SH*T!

January 14th, 2008, 11:56 PM	#12
RC02GT Enthusiast 2002 Mustang GT Join Date: Sep 2006 Location: Baltimore, MD Posts: 971	HAHA yeaaa ill get right to that one. lol no thanks ill just take a guess. __________________ BBK CAI, BBK shortys, BBK x pipe, Flow's, MGW shifter

January 14th, 2008, 11:58 PM

#13