Stainless Works Full Exhaust Prototype!

Sable · August 28th, 2006, 04:38 PM

I should be getting my 02 GT back from stainless works in a day or two. They have had it for 3 weeks fabing up their first prototype exhaust for the 99-04 Mustangs.

Stainless Works is in the process of developing 1 5/8” and 1 ¾” headers, and will be offering both with an x pipe, with or w/o cats. The exhaust combo they can include (at additional cost) will be a 2 ½” true dual setup with either s tube (straight through) or baffled turbo mufflers.
www.stainlessworks.net

I will post pics and video once I get it. PM me for additional info.

FYI - They are going to offer a special intro price for one month only. Mods, please get in contact with me so I can arange the group purchase/advertising info properly without violating any forum rules!!

Sable · August 28th, 2006, 04:42 PM

Check out the poll on the mid pipes and vote for your favorite!
http://www.moddedmustangs.com/forums...ll-vt4901.html

Sable · September 1st, 2006, 01:50 PM

Just talked to the guys over there. The car was base lined at 255 rwhp and 279 torque. Now, post exhaust it pulled 282 rwhp and 314 torque!!!

That is awesome!!!

That is a 27 hp pick up and 35 torque!!!
Can't wait to pick it up tonight!!!

mdvaldosta · September 1st, 2006, 01:57 PM

This is typical of any full exhaust setup, in fact I've seen more than that from the el cheapo Mac Longtubes and Prochamber, not including the cat-back.

Drgnracin72 · September 1st, 2006, 02:22 PM

yeah ove seen the same kind of pickups from other systems also. looks to me this stainless works stuff is pretty high quality. as for the gains its very typical but it looks like it would probably outlast any of the mac stuff. mac makes ok products but the quality control isnt up to par!

mdvaldosta · September 1st, 2006, 03:40 PM

Mac's coatings suck, mine started showing rust spots after just a few weeks actually. But the performance is good, heh.

Drgnracin72 · September 1st, 2006, 04:26 PM

yeah they perform well, but they dont seem to last as long as other hgiher quality stuff! i shouldnt really be talkin cuz i cheaped out and went with the bbk ceramics so............ but well see how they do!

raceruler03 · September 1st, 2006, 04:29 PM

I really don't know what my hp gain was with my exhaust I think the thing that made the most noticable power was the x-pipe, then maybe the headers.

Sable · September 2nd, 2006, 02:14 AM

It pulls like a raped ape! And sounds awesome. I will try to take some pics tomorrow and post them up. All the tubing is 304 stainless steel and guaranteed. Not worried in the slightest. No highway drown and sounds like a beast at WOT yet quiet at idle and cruise. I am very happy and can't get the SEG off of my face.

As for the macs....headers are not a job I care to do every couple of years and because I like to show my car I wanted something that looked nice under the hood.

orangeRcode · September 2nd, 2006, 02:01 PM

Just saw a piece on Stainless Works on Trucks! on the Speed Channel. Custom headers/sidepipes and intake down tubes on a vintage truck. They looked awesome.

Sable · September 9th, 2006, 08:17 PM

Sorry it took so long but I finally cleaned it up after the track and snapped a few pics. (this is a quicky wash so cut me some slack! LOL)

Sable · September 9th, 2006, 08:19 PM

Couple more pics....

Sable · September 9th, 2006, 09:05 PM

Link to more photos:
http://community.webshots.com/slides...562&key=CpEOyq

Drgnracin72 · September 9th, 2006, 09:18 PM

looks good

raceruler03 · September 10th, 2006, 01:45 PM

I like it

03 R Code · September 10th, 2006, 04:03 PM

great looking exhaust there. Full legnth headers available for a 4v engine?

Sable · September 11th, 2006, 09:24 AM

I'm not sure, you would have to give Al a ring at Stainless...I would have to think they would...

Sable · September 20th, 2006, 11:31 AM

Finally got some video. Actually the second run is me versus the wife in the Stang. The stangs exhaust overpowers the GTO's. (time for a catback on the GTO now!! LOL)
http://www.youtube.com/watch?v=KI1LEbHuVUU

GT 2002 · September 20th, 2006, 12:44 PM

To all,
Would getting a full exhaust setup like this really help my 02 GT? I just bought a stock Mustang and am looking foir the best inexpensive ways to increase power. Thanks.

MikeyS281 · September 20th, 2006, 03:16 PM

Originally Posted by GT 2002

To all,
Would getting a full exhaust setup like this really help my 02 GT? I just bought a stock Mustang and am looking foir the best inexpensive ways to increase power. Thanks.

Yes, it would definitely help your stang out. First, your stock exhaust is restrictive and doesn't allow your car to breathe right. Your car needs to breathe in order to work as do you. Second, aftermarket exhaust will allow your car to breathe with a whole lot less restriction therefore creating more power and torque. So in conclusion, yeah it would help out!

Good luck in modding your stang!

August 28th, 2006, 04:38 PM	#1
Sable Regular 2002 Mustang GT 12.8@109 Join Date: Aug 2006 Location: Akron, Ohio Posts: 106 iTrader: 0 reviews	Stainless Works Full Exhaust Prototype! I should be getting my 02 GT back from stainless works in a day or two. They have had it for 3 weeks fabing up their first prototype exhaust for the 99-04 Mustangs. Stainless Works is in the process of developing 1 5/8” and 1 ¾” headers, and will be offering both with an x pipe, with or w/o cats. The exhaust combo they can include (at additional cost) will be a 2 ½” true dual setup with either s tube (straight through) or baffled turbo mufflers. www.stainlessworks.net I will post pics and video once I get it. PM me for additional info. FYI - They are going to offer a special intro price for one month only. Mods, please get in contact with me so I can arange the group purchase/advertising info properly without violating any forum rules!! __________________ 2002 True Blue Mustang GT M5 309 rwhp 320 rwtq tune by Big Shot Dyno Best: 12.8 @ 109 mph 2004 Cosmos GTO M6 (1 of 366) 530 RWHP 510 RWT Tuned by Back Street Performance Best: 11.33 @ 129mph

August 28th, 2006, 04:42 PM	#2
Sable Regular 2002 Mustang GT 12.8@109 Join Date: Aug 2006 Location: Akron, Ohio Posts: 106 iTrader: 0 reviews	Check out the poll on the mid pipes and vote for your favorite! http://www.moddedmustangs.com/forums...ll-vt4901.html __________________ 2002 True Blue Mustang GT M5 309 rwhp 320 rwtq tune by Big Shot Dyno Best: 12.8 @ 109 mph 2004 Cosmos GTO M6 (1 of 366) 530 RWHP 510 RWT Tuned by Back Street Performance Best: 11.33 @ 129mph

September 1st, 2006, 01:50 PM	#3
Sable Regular 2002 Mustang GT 12.8@109 Join Date: Aug 2006 Location: Akron, Ohio Posts: 106 iTrader: 0 reviews	Just talked to the guys over there. The car was base lined at 255 rwhp and 279 torque. Now, post exhaust it pulled 282 rwhp and 314 torque!!! That is awesome!!! That is a 27 hp pick up and 35 torque!!! Can't wait to pick it up tonight!!! __________________ 2002 True Blue Mustang GT M5 309 rwhp 320 rwtq tune by Big Shot Dyno Best: 12.8 @ 109 mph 2004 Cosmos GTO M6 (1 of 366) 530 RWHP 510 RWT Tuned by Back Street Performance Best: 11.33 @ 129mph

September 1st, 2006, 02:22 PM	#5
Drgnracin72 I Post Entirely Way Too Much Join Date: Jan 2006 Location: somewhere in oklahoma Posts: 10,635 iTrader: 2 reviews	yeah ove seen the same kind of pickups from other systems also. looks to me this stainless works stuff is pretty high quality. as for the gains its very typical but it looks like it would probably outlast any of the mac stuff. mac makes ok products but the quality control isnt up to par! __________________ RIP ΜΟΛΩΝ ΛΑΒΕ Political Correctness is a doctrine, fostered by a delusional, illogical, liberal minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end. One Big Ass Mistake America SHEEPDOGS

September 1st, 2006, 04:26 PM	#7
Drgnracin72 I Post Entirely Way Too Much Join Date: Jan 2006 Location: somewhere in oklahoma Posts: 10,635 iTrader: 2 reviews	yeah they perform well, but they dont seem to last as long as other hgiher quality stuff! i shouldnt really be talkin cuz i cheaped out and went with the bbk ceramics so............ but well see how they do! __________________ RIP ΜΟΛΩΝ ΛΑΒΕ Political Correctness is a doctrine, fostered by a delusional, illogical, liberal minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end. One Big Ass Mistake America SHEEPDOGS

September 1st, 2006, 01:57 PM	#4
mdvaldosta MM Fanatic 2002 Mustang GT 11.47@120.58 Join Date: Aug 2005 Location: Valdosta, GA Posts: 3,940 iTrader: 0 reviews	This is typical of any full exhaust setup, in fact I've seen more than that from the el cheapo Mac Longtubes and Prochamber, not including the cat-back.

September 1st, 2006, 03:40 PM	#6
mdvaldosta MM Fanatic 2002 Mustang GT 11.47@120.58 Join Date: Aug 2005 Location: Valdosta, GA Posts: 3,940 iTrader: 0 reviews	Mac's coatings suck, mine started showing rust spots after just a few weeks actually. But the performance is good, heh.

September 1st, 2006, 04:29 PM	#8
raceruler03 Enthusiast 2000 mustang gt Join Date: Aug 2006 Location: georgia Posts: 913 iTrader: 0 reviews	I really don't know what my hp gain was with my exhaust I think the thing that made the most noticable power was the x-pipe, then maybe the headers. __________________ http://i157.photobucket.com/albums/t...donecopy-1.jpg

September 2nd, 2006, 02:14 AM	#9
Sable Regular 2002 Mustang GT 12.8@109 Join Date: Aug 2006 Location: Akron, Ohio Posts: 106 iTrader: 0 reviews	It pulls like a raped ape! And sounds awesome. I will try to take some pics tomorrow and post them up. All the tubing is 304 stainless steel and guaranteed. Not worried in the slightest. No highway drown and sounds like a beast at WOT yet quiet at idle and cruise. I am very happy and can't get the SEG off of my face. As for the macs....headers are not a job I care to do every couple of years and because I like to show my car I wanted something that looked nice under the hood. __________________ 2002 True Blue Mustang GT M5 309 rwhp 320 rwtq tune by Big Shot Dyno Best: 12.8 @ 109 mph 2004 Cosmos GTO M6 (1 of 366) 530 RWHP 510 RWT Tuned by Back Street Performance Best: 11.33 @ 129mph

September 2nd, 2006, 02:01 PM	#10
orangeRcode Hardcore Enthusiast 11.21@123 -150 shot Join Date: May 2006 Location: Mustang/Yukon, OK Posts: 1,828 iTrader: 1 reviews	Just saw a piece on Stainless Works on Trucks! on the Speed Channel. Custom headers/sidepipes and intake down tubes on a vintage truck. They looked awesome. __________________

September 9th, 2006, 09:05 PM	#13
Sable Regular 2002 Mustang GT 12.8@109 Join Date: Aug 2006 Location: Akron, Ohio Posts: 106 iTrader: 0 reviews	Link to more photos: http://community.webshots.com/slides...562&key=CpEOyq __________________ 2002 True Blue Mustang GT M5 309 rwhp 320 rwtq tune by Big Shot Dyno Best: 12.8 @ 109 mph 2004 Cosmos GTO M6 (1 of 366) 530 RWHP 510 RWT Tuned by Back Street Performance Best: 11.33 @ 129mph

September 9th, 2006, 09:18 PM	#14
Drgnracin72 I Post Entirely Way Too Much Join Date: Jan 2006 Location: somewhere in oklahoma Posts: 10,635 iTrader: 2 reviews	looks good __________________ RIP ΜΟΛΩΝ ΛΑΒΕ Political Correctness is a doctrine, fostered by a delusional, illogical, liberal minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end. One Big Ass Mistake America SHEEPDOGS

September 10th, 2006, 01:45 PM	#15
raceruler03 Enthusiast 2000 mustang gt Join Date: Aug 2006 Location: georgia Posts: 913 iTrader: 0 reviews	I like it __________________ http://i157.photobucket.com/albums/t...donecopy-1.jpg

September 10th, 2006, 04:03 PM	#16
03 R Code MM Fanatic unstoppable @ speed of light Join Date: Jul 2006 Location: Knees deep in dat ass Posts: 3,104 iTrader: 0 reviews	great looking exhaust there. Full legnth headers available for a 4v engine?

September 11th, 2006, 09:24 AM	#17
Sable Regular 2002 Mustang GT 12.8@109 Join Date: Aug 2006 Location: Akron, Ohio Posts: 106 iTrader: 0 reviews	I'm not sure, you would have to give Al a ring at Stainless...I would have to think they would... __________________ 2002 True Blue Mustang GT M5 309 rwhp 320 rwtq tune by Big Shot Dyno Best: 12.8 @ 109 mph 2004 Cosmos GTO M6 (1 of 366) 530 RWHP 510 RWT Tuned by Back Street Performance Best: 11.33 @ 129mph

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

September 20th, 2006, 11:31 AM	#18
Sable Regular 2002 Mustang GT 12.8@109 Join Date: Aug 2006 Location: Akron, Ohio Posts: 106 iTrader: 0 reviews	Finally got some video. Actually the second run is me versus the wife in the Stang. The stangs exhaust overpowers the GTO's. (time for a catback on the GTO now!! LOL) http://www.youtube.com/watch?v=KI1LEbHuVUU __________________ 2002 True Blue Mustang GT M5 309 rwhp 320 rwtq tune by Big Shot Dyno Best: 12.8 @ 109 mph 2004 Cosmos GTO M6 (1 of 366) 530 RWHP 510 RWT Tuned by Back Street Performance Best: 11.33 @ 129mph

September 20th, 2006, 12:44 PM	#19
GT 2002 Newbie Join Date: Sep 2006 Posts: 10 iTrader: 0 reviews	To all, Would getting a full exhaust setup like this really help my 02 GT? I just bought a stock Mustang and am looking foir the best inexpensive ways to increase power. Thanks.

Threads Similar to: Stainless Works Full Exhaust Prototype!
Thread	Thread Starter	Forum	Replies	Last Post
Full exhaust set up...	01silversnake	99-04	27	September 11th, 2007 01:38 PM
Mac dumps or full exhaust?	jonnotch	5.0 Mustangs	19	April 26th, 2007 09:33 PM
Full Exhaust help	MustangJon255	2005 - 2010	5	April 17th, 2007 12:33 PM
Keeping my 4'' Magna Flow Stainless Steel exhaust tips clean	1911A1	General Tech	3	April 2nd, 2007 08:46 AM
Stainless Works Mid Pipe Poll	Sable	99-04	6	August 29th, 2006 05:49 PM

All times are GMT -4. The time now is 03:41 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.

Stainless Works Full Exhaust Prototype!

Stainless Works Full Exhaust Prototype!

Pictures