kenne bell s/c

969800gt · January 26th, 2008, 11:36 PM

my friend has a 01 gt and bought a kb 2.1 s/c and wants me to install.

any tips?

RyanGT · January 26th, 2008, 11:41 PM

lots of beer! Just follow the directions, they have pictures on every step. It is time consuming but if both of you are doing it will be cake (and more fun)! I did it by myself which was a pain in the ass.

Mustang RacR94 · January 27th, 2008, 12:29 AM

its not all that bad to do, i know when taking the upper intake manifold off of my v6, and i dont know if this applies to a kenne bell, but i didnt put the egr back on right away because it was easy to get the intake to line up without it on, and getting it on later was hard, and i ended up just taking the manifold back off and connecting the egr up to it and just dealing with the added trouble, not sure if that applies at all

limited · January 27th, 2008, 10:43 AM

read the instructions through several times and understand them before you start.when you sand down the ecm contacts,take it down to copper and clean well. you will need 1 range colder plugs,ultrablack sealer,anti-freeze,spray cleaner.you also should solder all your connections,above all,take your time. I did it myself and actually enjoyed it.

Trick Tuners · January 27th, 2008, 11:56 AM

I use blue painters tape to tape up the holes on all the parts i removed, and label the step number. I tape all the screws or bolts to the part to so nothing gets messed up or lost. Keep everything clean, take your time, and follow the directions, but when you think the directions are wrong, just do what seems logical.

TheUNZippee! · January 27th, 2008, 11:57 AM

Originally Posted by Jgorm

I use blue painters tape to tape up the holes on all the parts i removed, and label the step number. I tape all the screws or bolts to the part to so nothing gets messed up or lost. Keep everything clean, take your time, and follow the directions, but when you think the directions are wrong, just do what seems logical.

+1000

This is exactly how I do involved jobs. And make sure you RTFM. :Yes

January 26th, 2008, 11:36 PM	#1
969800gt Regular '98 GT & '96 Civic Join Date: Mar 2007 Posts: 143 iTrader: 0 reviews	kenne bell s/c my friend has a 01 gt and bought a kb 2.1 s/c and wants me to install. any tips?

January 27th, 2008, 12:29 AM	#3
Mustang RacR94 MM Fanatic 99 cobra N/A Join Date: Dec 2006 Location: Fayetteville NC Posts: 3,170 iTrader: 0 reviews	its not all that bad to do, i know when taking the upper intake manifold off of my v6, and i dont know if this applies to a kenne bell, but i didnt put the egr back on right away because it was easy to get the intake to line up without it on, and getting it on later was hard, and i ended up just taking the manifold back off and connecting the egr up to it and just dealing with the added trouble, not sure if that applies at all __________________ 99 Cobra 03 Cobra motor AFCO H/E Pulley JLT CAI BBK L/T off road H/steeda catback SCT MAF Tune 03 cobra pumps HVGC

January 27th, 2008, 10:43 AM	#4
limited Premium Member 99 limited edition vert Join Date: Mar 2007 Location: Tacoma,Washington Posts: 3,297 iTrader: 0 reviews	read the instructions through several times and understand them before you start.when you sand down the ecm contacts,take it down to copper and clean well. you will need 1 range colder plugs,ultrablack sealer,anti-freeze,spray cleaner.you also should solder all your connections,above all,take your time. I did it myself and actually enjoyed it. __________________ KB'd 446rwhp/451rwtq, Mustang Dyno http://www.youtube.com/watch?v=3ZDpQ0EEm1M Tuned by Joe at http://www.tricktuners.com

January 27th, 2008, 11:56 AM	#5
Trick Tuners MM Fanatic KB'd GT Join Date: Nov 2006 Location: San Diego Posts: 4,467 iTrader: 3 reviews	I use blue painters tape to tape up the holes on all the parts i removed, and label the step number. I tape all the screws or bolts to the part to so nothing gets messed up or lost. Keep everything clean, take your time, and follow the directions, but when you think the directions are wrong, just do what seems logical. __________________ Check out my forums for stuff on troubleshooting, tuning, etc We teamed up with Socal Performance Racing to bring dyno tuning to San Diego. Be friends with us on FB

Threads Similar to: kenne bell s/c
Thread	Thread Starter	Forum	Replies	Last Post
Kenne Bell	hellbred07	2005 - 2010	34	November 9th, 2007 06:33 PM
Kenne Bell	Emay	General Tech	16	October 16th, 2007 11:52 AM
Kenne Bell	03blownmach1	99-04	11	June 28th, 2006 01:04 AM

January 26th, 2008, 11:41 PM	#2
RyanGT MM Fanatic 2000 GT Join Date: Dec 2006 Location: Lynnwood, Washington Posts: 4,258 iTrader: 4 reviews	lots of beer! Just follow the directions, they have pictures on every step. It is time consuming but if both of you are doing it will be cake (and more fun)! I did it by myself which was a pain in the ass.

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

All times are GMT -4. The time now is 05:39 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.