drag radials

tom2000r · February 3rd, 2008, 02:20 PM

do they make 28in. drag radials for 9-17 in rims..

kennyGT · February 3rd, 2008, 03:03 PM

Originally Posted by tom2000r

do they make 28in. drag radials for 9-17 in rims..

275/50/17 pretty sure M/T has that size if not racemaster

tom2000r · February 3rd, 2008, 03:30 PM

I figure with 410s, 100 nos. 4th gear will pull better in quarter

zerofx150 · February 3rd, 2008, 09:33 PM

i run the MT street radials in a 275/40/17

MustangMatt96GT · February 3rd, 2008, 09:35 PM

just run an actual ET street Slick, not the radial!

SWEET2KSTANG · February 3rd, 2008, 09:40 PM

Originally Posted by MustangMatt96GT

just run an actual ET street Slick, not the radial!

me too. i run a 26 right now, bout to go to a 28. with the 26, my bolt ons, and 125 shot, i had to raise my rev limiter to get through the traps.

MustangMatt96GT · February 3rd, 2008, 09:43 PM

yeah, ill be bumping to a 28 next season or when these are bad. What were u trapping at the end what RPm?

SWEET2KSTANG · February 3rd, 2008, 09:55 PM

113mph and right around 6200rpm. still trying to get air pressure right in the tires, i have a little tracion issues.

johnr2001 · February 3rd, 2008, 10:14 PM

I have 4:10s now with 275 40 17, my car is an auto and I am at like 6000 or so going through the traps. by going to a taller tire like a 28" or 275 50 how much would that help?? thanks John

MustangMatt96GT · February 3rd, 2008, 10:16 PM

200-300 RPM would be my guess

tom2000r · February 4th, 2008, 08:19 AM

I think 28s with 4:10s & nos.would get u through quarter better.

February 3rd, 2008, 02:20 PM	#1
tom2000r Enthusiast Join Date: Jan 2008 Location: ohio Posts: 753 iTrader: 0 reviews	drag radials do they make 28in. drag radials for 9-17 in rims..

February 3rd, 2008, 09:33 PM	#4
zerofx150 Regular 2003 GT 13.6 @ 101 Join Date: Feb 2007 Location: Ada OK Posts: 387 iTrader: 0 reviews	i run the MT street radials in a 275/40/17 __________________ 03 GT 5sp, K&N FIPK, MAC LT ceramic coated headers, MAC Prochamber, Steeda Tri-ax, 3.73, SCT X-cal2 tuned by D&G Dyno Tune, NX plate Kit, Eibach Pro Springs, CMS Stage 2 cams. STRIKE design from MK Motorsports.

February 3rd, 2008, 09:35 PM	#5
MustangMatt96GT Proud American 1996 Mustang GT Join Date: Dec 2006 Location: Lakewood, CO Posts: 10,690 iTrader: 3 reviews	just run an actual ET street Slick, not the radial! __________________ RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions 25.3 SFI Chassis Build Never Lift Racecars

February 3rd, 2008, 09:43 PM	#7
MustangMatt96GT Proud American 1996 Mustang GT Join Date: Dec 2006 Location: Lakewood, CO Posts: 10,690 iTrader: 3 reviews	yeah, ill be bumping to a 28 next season or when these are bad. What were u trapping at the end what RPm? __________________ RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions 25.3 SFI Chassis Build Never Lift Racecars

February 3rd, 2008, 09:55 PM	#8
SWEET2KSTANG mm's nitrous mod 2000 mustang gt 11.79@115.83 (old set up) Join Date: Oct 2006 Location: N.W. AR Posts: 12,540 iTrader: 8 reviews	113mph and right around 6200rpm. still trying to get air pressure right in the tires, i have a little tracion issues. __________________ project warhorse under construction wagon burner under construction as well (04 lightning) being built by MP2 Performance

February 3rd, 2008, 03:30 PM	#3
tom2000r Enthusiast Join Date: Jan 2008 Location: ohio Posts: 753 iTrader: 0 reviews	I figure with 410s, 100 nos. 4th gear will pull better in quarter

February 3rd, 2008, 10:14 PM	#9
johnr2001 Enthusiast 2001 GT Join Date: Dec 2007 Location: Bivalve MD Posts: 575 iTrader: 1 reviews	I have 4:10s now with 275 40 17, my car is an auto and I am at like 6000 or so going through the traps. by going to a taller tire like a 28" or 275 50 how much would that help?? thanks John __________________ 03 Mach 1 full eaton swap, 18" chrome bullitts, H&R springs, 5.0 shifter, slp2, mac catted H, FRP 4.10's, 443 RWHP/ 386 TQ

February 3rd, 2008, 10:16 PM	#10
MustangMatt96GT Proud American 1996 Mustang GT Join Date: Dec 2006 Location: Lakewood, CO Posts: 10,690 iTrader: 3 reviews	200-300 RPM would be my guess __________________ RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions 25.3 SFI Chassis Build Never Lift Racecars

February 4th, 2008, 08:19 AM	#11
tom2000r Enthusiast Join Date: Jan 2008 Location: ohio Posts: 753 iTrader: 0 reviews	I think 28s with 4:10s & nos.would get u through quarter better.

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: drag radials
Thread	Thread Starter	Forum	Replies	Last Post
M and H Drag Radials	catchtheroadrunner	Parts	1	January 1st, 2008 11:44 AM
drag radials	drazga97	99-04	21	December 28th, 2007 04:51 PM
Drag Radials	sneezingfox	5.0 Mustangs	58	December 10th, 2007 09:21 AM
Drag Radials	MATT02GT	99-04	6	July 26th, 2007 06:04 PM
DRAG RADIALS, STILL NEED HELP!?	sweet99	99-04	7	December 21st, 2006 01:31 AM

All times are GMT -4. The time now is 05:43 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.