pistons and rods 4.6

94stang · February 15th, 2008, 10:12 AM

what I'm wondering is if the 2005+ Kenne bell s/c kit will fit a '02 with the 3v heads, that's my future plans (9 psi intercooled) I'm not sure teh heat exchanger would fit under the bumper right

i think the charger would fit almost positive but with enough time, money, and a little "know how" anything is possible...
i mean i was going to make my own swap kit but i didnt know what to do with the fuel switch then when i was looking around for that i cam across loganmotorsports video then there site so it was cool but i was so close to making my own i had all the drawings for the header plates and i still might do that...not sure yet

DanTheMan · February 15th, 2008, 10:38 AM

keep me posted cause i know those 3v heads flow damn good

94stang · February 15th, 2008, 10:52 AM

the kit is 320 plus shipping by the way

DanTheMan · February 15th, 2008, 11:00 AM

that's not bad at all.. then i just have to get the rest of the stuff lol

94stang · February 15th, 2008, 11:05 AM

i have some of it i need heads and intake, timing cover and a bunch more so yeah its a little more then staged 2v head but the power potential is much higher and with the 2 intake valve and one big exhaust they respond much better to mods

pro06gt · February 19th, 2008, 02:19 PM

I have a buddy with a kenne belle on the 3v heads but what are you talking about actually fitting it in the engine bay?

DanTheMan · February 19th, 2008, 06:46 PM

No what I'm wondering is about the CAI and the heat exchanger under the bumper

February 15th, 2008, 10:38 AM	#22
DanTheMan Hardcore Enthusiast 1995 Civic EX Soon to see a Garrett 60 trim Join Date: Oct 2007 Location: Norfolk, VA Posts: 1,196 iTrader: 1 reviews	keep me posted cause i know those 3v heads flow damn good __________________ My honda

February 15th, 2008, 11:00 AM	#24
DanTheMan Hardcore Enthusiast 1995 Civic EX Soon to see a Garrett 60 trim Join Date: Oct 2007 Location: Norfolk, VA Posts: 1,196 iTrader: 1 reviews	that's not bad at all.. then i just have to get the rest of the stuff lol __________________ My honda

February 19th, 2008, 06:46 PM	#27
DanTheMan Hardcore Enthusiast 1995 Civic EX Soon to see a Garrett 60 trim Join Date: Oct 2007 Location: Norfolk, VA Posts: 1,196 iTrader: 1 reviews	No what I'm wondering is about the CAI and the heat exchanger under the bumper __________________ My honda

Threads Similar to: pistons and rods 4.6
Thread	Thread Starter	Forum	Replies	Last Post
Need Suggestion On What Type Of Rods And Pistons	dbsaum	5.0 Mustangs	18	February 12th, 2008 02:26 PM
pistons rods	Bhblondguy	2005 - 2010	11	November 7th, 2007 05:46 PM
Pistons Rods	Bhblondguy	2005 - 2010	3	November 7th, 2007 01:50 PM
Pistons Rods	Bhblondguy	2005 - 2010	0	November 5th, 2007 10:08 PM
pistons and rods on the cobra...	WVSNS&	99-04	3	March 10th, 2007 08:11 AM

February 15th, 2008, 10:52 AM	#23
94stang Regular 2002 gt supercharged Join Date: Aug 2007 Location: Rochester MN Posts: 387 iTrader: 0 reviews	the kit is 320 plus shipping by the way

February 15th, 2008, 11:05 AM	#25
94stang Regular 2002 gt supercharged Join Date: Aug 2007 Location: Rochester MN Posts: 387 iTrader: 0 reviews	i have some of it i need heads and intake, timing cover and a bunch more so yeah its a little more then staged 2v head but the power potential is much higher and with the 2 intake valve and one big exhaust they respond much better to mods

February 19th, 2008, 02:19 PM	#26
pro06gt Newbie Join Date: Oct 2007 Posts: 4 iTrader: 0 reviews	I have a buddy with a kenne belle on the 3v heads but what are you talking about actually fitting it in the engine bay?

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

All times are GMT -4. The time now is 04:25 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.