Double checking the check list before I buy

Cricket · March 19th, 2008, 10:25 AM

Alright I'm gettin ready to finish my exhaust
MAC LT's
and Lethal catted X-pipe

But I know there are the other things I'm gonna need to do this properly

Stage 8 locking bolts, gaskets, and o2 sensor extensions

Is there anything I'm missing?

Also with the bolts and the gaskets which ones would ya'll recommend?

Doc8224 · March 19th, 2008, 10:33 AM

Percy gaskets for sure. and the locking bolts probably just about any good set will do. Sounds like you got the list covered, just remember to set aside quite a few hours for the install unless you have a tubular K-member.

the real shocker · March 19th, 2008, 10:36 AM

if you have the extra money, i would recommend going ahead and replacing the motor mounts with urethane mounts since you will already be right there....

we did my header swap @ 70,000 miles and my passenger side stock mount was shot...

and +1 on the Percy gaskets

Cricket · March 19th, 2008, 10:37 AM

I'm gonna have an entire set aside, and have a buddy to help me out. Hell the girlfriend wants to help me out with it. I just want her to wash my car. Thanks though.

the real shocker · March 19th, 2008, 10:38 AM

http://www.jegs.com/i/Percy%27s/760/66033/10002/-1/744841|10259

Cricket · March 19th, 2008, 10:43 AM

so about how long to motor mounts last I'm at 43,xxx miles

sgrcltpunk · March 19th, 2008, 10:43 AM

if you need help i live in newport news im not a mecanic or anything but im willing to help

the real shocker · March 19th, 2008, 11:04 AM

Originally Posted by Cricket

so about how long to motor mounts last I'm at 43,xxx miles

i dont have an answer to how long stock mounts can last...

the urethane mounts are supposed to last for as long as you have them

Cricket · March 19th, 2008, 11:06 AM

where can I get some? I looked all over jegs and couldnt find em

the real shocker · March 19th, 2008, 11:12 AM

1996-2004 Mustang 4.6L Polyurethane Motor Mounts [ ENE41127 ] from Brothers Performance Warehouse

these are the ones I went with, but there are others that also have a tranmission mount...

Cricket · March 19th, 2008, 11:18 AM

Originally Posted by sgrcltpunk

if you need help i live in newport news im not a mecanic or anything but im willing to help

Might take you up on that offer

Originally Posted by the real shocker

1996-2004 Mustang 4.6L Polyurethane Motor Mounts [ ENE41127 ] from Brothers Performance Warehouse

these are the ones I went with, but there are others that also have a tranmission mount...

hmm...I think I'll wait a while before I spend the money.

March 19th, 2008, 10:33 AM	#2
Doc8224 N/A 4v Guru 2003 Mach 1 Join Date: Oct 2007 Location: Afghanistan Posts: 3,463 Blog Entries: 2 iTrader: 1 reviews	Percy gaskets for sure. and the locking bolts probably just about any good set will do. Sounds like you got the list covered, just remember to set aside quite a few hours for the install unless you have a tubular K-member. __________________ Military Crew U.S. Army Aviation Apache's Lead The Way

March 19th, 2008, 10:36 AM	#3
the real shocker Hardcore Enthusiast 2002 Mustang GT 13.00 @ 105 Join Date: Feb 2007 Location: Jackson, MS Posts: 1,820 iTrader: 1 reviews	if you have the extra money, i would recommend going ahead and replacing the motor mounts with urethane mounts since you will already be right there.... we did my header swap @ 70,000 miles and my passenger side stock mount was shot... and +1 on the Percy gaskets __________________

March 19th, 2008, 10:38 AM	#5
the real shocker Hardcore Enthusiast 2002 Mustang GT 13.00 @ 105 Join Date: Feb 2007 Location: Jackson, MS Posts: 1,820 iTrader: 1 reviews	http://www.jegs.com/i/Percy%27s/760/66033/10002/-1/744841\|10259 __________________

March 19th, 2008, 10:43 AM	#7
sgrcltpunk amateur adult film star 1999 gt to infinity and beyond Join Date: Feb 2007 Location: newport news,va Posts: 1,059 iTrader: 0 reviews	if you need help i live in newport news im not a mecanic or anything but im willing to help __________________ performance headlight fluid, 6 ball muffler bearings, and dual flux capacitors

March 19th, 2008, 11:12 AM	#10
the real shocker Hardcore Enthusiast 2002 Mustang GT 13.00 @ 105 Join Date: Feb 2007 Location: Jackson, MS Posts: 1,820 iTrader: 1 reviews	1996-2004 Mustang 4.6L Polyurethane Motor Mounts [ ENE41127 ] from Brothers Performance Warehouse these are the ones I went with, but there are others that also have a tranmission mount... __________________

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: Double checking the check list before I buy
Thread	Thread Starter	Forum	Replies	Last Post
70,000 Miles... Check List	boom-boom	96-98	7	November 28th, 2007 05:15 PM
Check it out GTs made the list :)	Phoenixx	The Clubhouse	7	October 20th, 2007 09:31 PM
Making a list and checking it twice...	AnglicoGT98	96-98	14	August 26th, 2007 09:48 PM
FNG checking in...	Ronaele550R	New Members Introductions	7	January 8th, 2007 01:35 PM
Final Suspension Check List	mustang_montana	96-98	8	July 14th, 2006 01:36 AM

All times are GMT -4. The time now is 05:23 PM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.