[bigbluemonkey]

has anyone picked up the slack in their gas pedals? just wanted to know how difficult some people found it and how it ended up working out for ya?

[HessiaN257]

Haven't done it yet, but it doesn't seem hard.

How-to: Mustangworld - 99 - 00 Gas Pedal Adjustment tip

[BrandonJD25]

took about 20 minutes...

just make sure you don't cut too big a piece of tubing for the spacer, 2 zip tieces, a blade for the tube, and that's about it. i'd deff recommend disconnecting the throttle cable from the t/b to give you more slack.

[bigbluemonkey]

Originally Posted by BrandonJD25 took about 20 minutes... just make sure you don't cut too big a piece of tubing for the spacer, 2 zip tieces, a blade for the tube, and that's about it. i'd deff recommend disconnecting the throttle cable from the t/b to give you more slack.

yea thats what i figured...im debating on it. mainly cuz im lazy

[TyCouey2000GT]

Dude.. the pedal mod takes prolly less than 5 minutes... its easy as crap...

[PowerShiftz02GT]

Originally Posted by bigbluemonkey has anyone picked up the slack in their gas pedals? just wanted to know how difficult some people found it and how it ended up working out for ya?

its a great mod. do it. the pedal is going to be Very touchy now so be careful buts is a great mod. I love it. I got some really good Clear directions for you. The one from Mustangworld sucks. I couldn't understand that one for shit. The install is hard the first time. At least it was for me because it was frustrating. But then once you get the hang of it, it is really easy. And im pretty much mechanically challenged and i did this mod. is really easy. So if i can do it you can do it.

Full Throttle - 99-04 throttle cable adjustment/fix

here is another one. Ford Racing Bullitt Pedals (Manual)

This shows you at the end of the video. This video makes the Directions super clear on what to do. I used Plastic tubing instead of a nylon spacer because i couldn't find a Hose clamp that would fit around the nylon spacer but the nylon spacer would be best for the job. Also a trick to making the job a whole lot easier is to Put some type of tubing in the throttle body lever. im not sure what it is called but here is a picture. This will allow the cable to be longer in the driver compartment so you can slip the nylon spacer around the cable easier.





here two different images. tried to make it show up better with the orange tubing. You need to hold it open with something though. It will make the install so much easier. And don't forget to take the tubing out before you start the car.

[00vabchgt]

it's a really easy mod, cheap and absolutely worth it...

[TyCouey2000GT]

your talkin bout the pedal mod,... she jst showed you what you can do to your plenum and tb

[BrandonJD25]

yah dude, totally worth the time (and the <$1 for the parts). lol do you guys have any sticking now tho? i think that i'll hit it with some wd40 or something cause it seems to stick a little (did i take out too much slack?)

[silvergtstang99]

hmm...

[bigbluemonkey]

Originally Posted by TyCouey2000GT Dude.. the pedal mod takes prolly less than 5 minutes... its easy as crap...

you underestimate my laziness lol

[TyCouey2000GT]

l0l... just reach under your pedal.. get your sliced nylon spacer, pull the pedal up, put the spacer on the wire, clamp, and tada

[PowerShiftz02GT]

Originally Posted by BrandonJD25 yah dude, totally worth the time (and the <$1 for the parts). lol do you guys have any sticking now tho? i think that i'll hit it with some wd40 or something cause it seems to stick a little (did i take out too much slack?)

I moved mine up so i have No Slack at all and i have no problem with sticking.

[TyCouey2000GT]

If you do the pedal mod it wont stick, but if you do it to your t/b and plenum thats when it may start

[BrandonJD25]

i just did the pedal one. it just feels like a little sticky when i first step on it. it's like it just needs to be pushed a little harder to get it started...