Rear brake moan?

grady · March 31st, 2008, 02:56 AM

Hey guys,

I'm new here and have not made many posts but I have been reading alot. Lots of good info on this forum!

I have a 02 GT with the Baer 13inch Eradispeed rear rotors and hawk pads (as well as the front Baer Track kit) and I am getting a groan/moan from the rear end.

It is not during braking. It happens after the brakes have been warmed up and I have been driving the car in stop and go traffic. When I accelerate slowly after a stop or near stop I hear this noise. It disappears quickly.

I was thinking it is a rear caliper sticking that eventually releases.
Any ideas?
Thanks!

zolen · March 31st, 2008, 03:03 AM

That sounds likely. If the pads are really new the pad to rotor clearance would be tight. When the rotors heated up they might expand enough to touch the pads. It might go away after the pads wear down some.

grady · March 31st, 2008, 11:30 PM

Thanks. That's what I am hoping it is! Going to jack it up and spin the wheel to see if it spins freely after I drive it for a while and heat the brakes up.

March 31st, 2008, 02:56 AM	#1
grady Newbie 2002 GT Join Date: Mar 2008 Posts: 20 iTrader: 0 reviews	Rear brake moan? Hey guys, I'm new here and have not made many posts but I have been reading alot. Lots of good info on this forum! I have a 02 GT with the Baer 13inch Eradispeed rear rotors and hawk pads (as well as the front Baer Track kit) and I am getting a groan/moan from the rear end. It is not during braking. It happens after the brakes have been warmed up and I have been driving the car in stop and go traffic. When I accelerate slowly after a stop or near stop I hear this noise. It disappears quickly. I was thinking it is a rear caliper sticking that eventually releases. Any ideas? Thanks!

March 31st, 2008, 11:30 PM	#3
grady Newbie 2002 GT Join Date: Mar 2008 Posts: 20 iTrader: 0 reviews	Thanks. That's what I am hoping it is! Going to jack it up and spin the wheel to see if it spins freely after I drive it for a while and heat the brakes up. __________________ Bullit Handling Pack (struts, springs, swaybars), Rear U&LCAs, Front Cobra A-arms, K&N CAI, X3, CC plates, Tri-ax, Baer 13"F&R Brakes, TowerSB...

Threads Similar to: Rear brake moan?
Thread	Thread Starter	Forum	Replies	Last Post
4 cyl swap...rear brake line	Way_Fast_Whitey	5.0 Mustangs	14	September 6th, 2007 10:04 PM
Rear brake hoses?	Dj1123	V6 Mustangs	3	May 24th, 2007 03:16 PM
? About axle moan/groan TSB	stanglifemike	2005 - 2010	10	April 3rd, 2007 01:34 AM
Rear Brake Questions	Jojogunne	5.0 Mustangs	2	March 23rd, 2007 11:13 AM

March 31st, 2008, 03:03 AM	#2
zolen Newbie 2003 Cobra 12.3@ 113 Join Date: Mar 2008 Location: Bham AL Posts: 37 iTrader: 0 reviews	That sounds likely. If the pads are really new the pad to rotor clearance would be tight. When the rotors heated up they might expand enough to touch the pads. It might go away after the pads wear down some.

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

All times are GMT -4. The time now is 02:32 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.