Headers for 03-04 Cobra

BiGD12590 · October 15th, 2006, 11:17 PM

Will the headers off a 1999 Mustang GT work on an 03-04 Cobra Motor?

Drgnracin72 · October 16th, 2006, 12:28 AM

no sir

BiGD12590 · October 16th, 2006, 02:42 PM

alright thanx

i didnt think it would

BiGD12590 · October 16th, 2006, 02:47 PM

What all would I need to do to put an 03 cobra motor and trans in my 1999 Auto GT? I already got the motor and trans, the motor doesnt have the ecu or computer harness. I want to make my 99 GT an exact 03 Cobra, cuz my friend who has a pretty highly modded 02 Camaro SS said that I couldnt do it, so now I have to. I want it to be an EXACT replica, so interior, exterior, mechanically has to be the same. So I need all the info I can get about the terminator cobras, and where I can get all the stuff that will be needed to do this.

Thanx for your help.

ChrisJ · October 16th, 2006, 02:54 PM

- Your going to need the injector harness
- the maf with harness
- a chip with a 03 cobra tune on it
- your going to need to install a t56 transmission
- your goig to need to get the cobra tank with cobra fuel pumps
- If you want it to be exact you are going to need to install the IRS...I wouldnt do it though...Stick with your straight axle
- you are going to need to put the conbra gauge cluster in your car
- cobra sets
- cobra brakes

And then you mgiht be close...You would be better off just building your 2V or Putting the cobra engine in your car and the t56 transmission and calling it a day...And then it is not even guaranteed that it will be perfect even then...

White99stang · October 16th, 2006, 02:55 PM

it can be done, like you just said you will have to get the harness, ecu and all the other stuff but it would almost be better just to sell your 99 and buy a 03 cobra. That or just come up with alot of money cause the seats, full interior and exterior is gonna cost alot of money and time. that and who cares what your friend with his 02 camaro says. Just get some nitrous and spank his ass.

BiGD12590 · October 16th, 2006, 08:22 PM

I think I am just going to put the motor, trans and a few other things in.

How hard is it to take my auto car and make it manual with the t56 trans?

GTSilver · October 17th, 2006, 12:28 PM

dude buy a cobra. sounds like ur gonna spend a shitload of money. i'd trade mine in...actually...in a bout 2 more years i'm upgrading to someting with a lill more kick myself like an 03-04 terminator...unless ford comes out with a high hp stang by then...i've heard rumors of a new boss and mach1...and even of new stangs comin out in 08 as 09's.

October 15th, 2006, 11:17 PM	#1
BiGD12590 Regular Join Date: Jul 2006 Location: Estero, Florida Posts: 72	Headers for 03-04 Cobra Will the headers off a 1999 Mustang GT work on an 03-04 Cobra Motor?

October 16th, 2006, 12:28 AM	#2
Drgnracin72 Slayer of Douchebags mustangless Join Date: Jan 2006 Location: PURCELL, OKLAHOMA Posts: 9,345	no sir __________________ NUKE THE UNBORN GAY BABY WHALES FOR JESUS

October 16th, 2006, 02:54 PM	#5
ChrisJ MuchCoolerThanGTsetGO 2002 Mustang GT SLOW Join Date: Jun 2006 Location: Shepherdsville, Kentucky Posts: 16,281	- Your going to need the injector harness - the maf with harness - a chip with a 03 cobra tune on it - your going to need to install a t56 transmission - your goig to need to get the cobra tank with cobra fuel pumps - If you want it to be exact you are going to need to install the IRS...I wouldnt do it though...Stick with your straight axle - you are going to need to put the conbra gauge cluster in your car - cobra sets - cobra brakes And then you mgiht be close...You would be better off just building your 2V or Putting the cobra engine in your car and the t56 transmission and calling it a day...And then it is not even guaranteed that it will be perfect even then... __________________ My Junk www.myspace.com/cjobe

October 16th, 2006, 02:55 PM	#6
White99stang MM's nicest mod, :) Join Date: Aug 2005 Location: elkridge, MD Posts: 2,851	it can be done, like you just said you will have to get the harness, ecu and all the other stuff but it would almost be better just to sell your 99 and buy a 03 cobra. That or just come up with alot of money cause the seats, full interior and exterior is gonna cost alot of money and time. that and who cares what your friend with his 02 camaro says. Just get some nitrous and spank his ass. __________________ Have a Nice Day, Especially MSO 99 Mustang GT VT 302 Stroker 11.13@123 f.s. 9k 06 Dodge MegaCab Diesel 455rwhp/815rwtq

October 17th, 2006, 12:28 PM	#8
GTSilver Enthusiast Join Date: Aug 2006 Posts: 698	dude buy a cobra. sounds like ur gonna spend a shitload of money. i'd trade mine in...actually...in a bout 2 more years i'm upgrading to someting with a lill more kick myself like an 03-04 terminator...unless ford comes out with a high hp stang by then...i've heard rumors of a new boss and mach1...and even of new stangs comin out in 08 as 09's. __________________ 2002 GT K&N CAI O/R X-Pipe Race Bullit Mufflers SCT Xcal2 w/Custom Tune By RWTD 4.10 Rear Nitto D/R's FR500 Rims 17x9 17x10.5 http://i118.photobucket.com/albums/o...ver/cpsing.jpg

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

October 16th, 2006, 02:42 PM	#3
BiGD12590 Regular Join Date: Jul 2006 Location: Estero, Florida Posts: 72	alright thanx i didnt think it would

October 16th, 2006, 02:47 PM	#4
BiGD12590 Regular Join Date: Jul 2006 Location: Estero, Florida Posts: 72	What all would I need to do to put an 03 cobra motor and trans in my 1999 Auto GT? I already got the motor and trans, the motor doesnt have the ecu or computer harness. I want to make my 99 GT an exact 03 Cobra, cuz my friend who has a pretty highly modded 02 Camaro SS said that I couldnt do it, so now I have to. I want it to be an EXACT replica, so interior, exterior, mechanically has to be the same. So I need all the info I can get about the terminator cobras, and where I can get all the stuff that will be needed to do this. Thanx for your help.

October 16th, 2006, 08:22 PM	#7
BiGD12590 Regular Join Date: Jul 2006 Location: Estero, Florida Posts: 72	I think I am just going to put the motor, trans and a few other things in. How hard is it to take my auto car and make it manual with the t56 trans?

Threads Similar to: Headers for 03-04 Cobra
Thread	Thread Starter	Forum	Replies	Last Post
98 Cobra headers?	docbelasco	General Tech	2	May 27th, 2007 09:34 PM
Headers on cobra	342stroker	Exhaust	2	April 11th, 2007 12:35 AM
Headers on cobra	342stroker	Exhaust	0	April 10th, 2007 04:35 PM
Headers on Cobra	1998_svt_cobra	96-98	1	March 15th, 2007 01:15 AM
Headers for a 97 cobra	DRAD14	96-98	10	March 12th, 2007 01:44 AM

All times are GMT -4. The time now is 05:15 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.