Cam Degreeing Help!!

andres0286 · May 30th, 2008, 10:52 PM

Ok, so my mech got the COMP Cam Degree Kit. He is familiar with the intake centerline method. We have basics on how to degree the cam. Can anybody tell us specifics, any vids out there or articles on how to degree and OHC engine?

00silvergt · May 31st, 2008, 12:39 AM

Mustangworld Messageboard - 4.6L SOHC/DOHC Camshaft Degree Procedure

Not sure if this will help you or not. I have never done it. Maybe someone else will chime in.

MustangMatt96GT · May 31st, 2008, 12:43 AM

it describes it right in the instructinogs that came with your cams.

andres0286 · May 31st, 2008, 07:09 AM

In the cam instructions it says that there are two methods, the intake centerline and whats the other one?

MustangMatt96GT · May 31st, 2008, 11:09 AM

i dont think on an OHC you can do anything other than the intake centerline method. At least I dont see a way possible.

May 30th, 2008, 10:52 PM	#1
andres0286 Hardcore Enthusiast 2002 Mustang GT Join Date: Mar 2008 Location: Guaynabo, Puerto Rico Posts: 1,028 iTrader: 1 reviews	Cam Degreeing Help!! Ok, so my mech got the COMP Cam Degree Kit. He is familiar with the intake centerline method. We have basics on how to degree the cam. Can anybody tell us specifics, any vids out there or articles on how to degree and OHC engine? __________________ 2002 GT SOLD 2003 Mustang GT Cobra Clone SOLD Procharged @ 8psi 458 rwhp Mods in Garage

May 31st, 2008, 12:39 AM	#2
00silvergt Regular 2000 Mustang Gt Join Date: Jun 2006 Location: Pennsylvania Posts: 428 iTrader: 0 reviews	Mustangworld Messageboard - 4.6L SOHC/DOHC Camshaft Degree Procedure Not sure if this will help you or not. I have never done it. Maybe someone else will chime in. __________________ Tuned by Joe at Tricktuners.com

May 31st, 2008, 12:43 AM	#3
MustangMatt96GT Proud American 1996 Mustang GT Join Date: Dec 2006 Location: Lakewood, CO Posts: 10,690 iTrader: 3 reviews	it describes it right in the instructinogs that came with your cams. __________________ RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions 25.3 SFI Chassis Build Never Lift Racecars

May 31st, 2008, 07:09 AM	#4
andres0286 Hardcore Enthusiast 2002 Mustang GT Join Date: Mar 2008 Location: Guaynabo, Puerto Rico Posts: 1,028 iTrader: 1 reviews	In the cam instructions it says that there are two methods, the intake centerline and whats the other one? __________________ 2002 GT SOLD 2003 Mustang GT Cobra Clone SOLD Procharged @ 8psi 458 rwhp Mods in Garage

May 31st, 2008, 11:09 AM	#5
MustangMatt96GT Proud American 1996 Mustang GT Join Date: Dec 2006 Location: Lakewood, CO Posts: 10,690 iTrader: 3 reviews	i dont think on an OHC you can do anything other than the intake centerline method. At least I dont see a way possible. __________________ RIP Travis Billings Special Thanks to: Andrews Racing Transmissions Baseline Suspensions 25.3 SFI Chassis Build Never Lift Racecars

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: Cam Degreeing Help!!
Thread	Thread Starter	Forum	Replies	Last Post
Overview Degreeing a cam	IcantDo55	5.0 Mustangs	1	February 25th, 2010 08:30 AM
289 cam vs 351 cam	Kenn	Classic Mustangs	11	May 5th, 2008 01:20 PM
Degreeing a cam	shurb125	5.0 Mustangs	30	December 27th, 2007 10:31 PM
N/A Cam and Blower Cam ???	StuTheMusicEngineer	99-04	1	March 3rd, 2007 04:35 AM
E cam or F cam horsepower and 1/4 mile time questions	GreyGhost	5.0 Mustangs	1	August 21st, 2006 06:25 PM

All times are GMT -4. The time now is 10:32 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.