04 udp ?

MIKE 04 GT · June 4th, 2008, 04:45 PM

which are the best under drive pullys for a 04 gt. do you have to change the belt, how much is a belt. how hard is it to do yourself

MATT02GT · June 4th, 2008, 04:55 PM

They arent too bad to install... Just need a pulley puller and some mechanical knowledge. They best ones replace the whole crank pulley instead of the "piggyback" style ones. I think the Steedas are the replace style

DeMello · June 4th, 2008, 04:58 PM

steeda ftw

00vabchgt · June 4th, 2008, 05:00 PM

after some research, i found that some builders (like Sean Hyland) actually recommend the piggyback ones because the non-piggyback style ones replace the entire crank pulley, which on our cars also acts as a harmonic damper. if the mass of the crank pulley isn't correct (like on some non-piggyback UDP's), it can lead to premature failure of the oil pump gears, leading to premature failure of your engine. it's rare, but it can happen. the piggyback style ones reuse the stock crank which acts as the harmonic damper. so the mass of the damper is correct because you reuse the one Ford put on there. a lot of people think the piggyback style UDP's are crap or whatever. they're not. there's nothing wrong with them at all. also, you don't need to buy a new belt. the stock one will fit...
i have the March ones btw...

White99stang · June 4th, 2008, 05:14 PM

but the steeda ones you can buy have the sfi approved damper. And to run certain times you need a sfi approved damper which the stock one is not.

mustangjl · June 4th, 2008, 05:18 PM

steeda worked with ford to get the right damping characteristics. so no harm would be done to your engine.

00vabchgt · June 4th, 2008, 06:56 PM

Originally Posted by White99stang

but the steeda ones you can buy have the sfi approved damper. And to run certain times you need a sfi approved damper which the stock one is not.

this is true...

Originally Posted by mustangjl

steeda worked with ford to get the right damping characteristics. so no harm would be done to your engine.

i wasn't trying to say that the Steeda ones are going to fuck up your engine. i don't think you could go wrong with any Steeda product, but not all UDP's are made to Steeda's standards. on the other hand, to say that all piggyback UDP's are crap is just not true and it misleads a lot of noobs into believing it and then regurgitating the same thing...

MIKE 04 GT · June 5th, 2008, 10:10 AM

where is the best place to buy them. will it help on gas any or not.

00vabchgt · June 5th, 2008, 10:18 AM

i got my March UDP's from Summit

GTsetGO · June 5th, 2008, 10:48 AM

i have the steeda UDP's on my 04.

bigbadwollfff04 · June 5th, 2008, 11:40 AM

i have steeda's on my 04 also, got from american muscle!! work just fine

99mustanggtman · June 5th, 2008, 03:11 PM

stock, underdrive pulleys are a joke for the minimal gains they produce

KhaosGT · June 6th, 2008, 06:32 PM

i went with steeda and it only took me about 45 minutes to install, i got them from AM

06z28eaTer · June 7th, 2008, 02:38 AM

ive had mine for awhile now but havent installed, but i went with steeda

KhaosGT · June 7th, 2008, 09:31 AM

steeda is the way to go with underdrive pulleys imo....there is a install video of a guy putting them in his stang and it talks about how steeda worked with ford to make the udps i have had mine in for several months and they have performed with oem quality and a decent gain in power

BLK01SS · June 7th, 2008, 02:12 PM

I have the ASP piggyback style. They are fine no problems.Noticeable powergain. You can reuse the stock belt. I had to use an impact gun to get the altenator and crank pulleys off. Also the kit came with 3 bolts to pull the 2 crank pulleys together but I had the advantage of a hydraulic press, not a necessity, but less time consuming and didn't ahve to worry about pulling the pulleys togther evenly with the bolts. It all about what you think they are worth to what you will spend on them.

superbeef1000 · June 27th, 2008, 10:08 PM

dose any one have a picture of the water pump steeda pully for the short shaft water pump i just got a used set for 100 bucks and need to be sure if i have the correct water pump pully

superbeef1000 · June 27th, 2008, 10:34 PM

bump........... any one

BLK01SS · June 27th, 2008, 11:29 PM

The pulley at the top is what a 99-first half of 01 looks like,

Google Image Result for http://www.2checkout.com/va/public/render_image?image_id=12426492

BLK01SS · June 27th, 2008, 11:31 PM

This is one is what a mid 01-04 pulley looks like

Google Image Result for http://www.miracerros.com/mustang/pulley_main.jpg

June 4th, 2008, 04:45 PM	#1
MIKE 04 GT Regular 04 MUSTANG GT 14.5 @ 97.2 Join Date: Oct 2007 Location: SC Posts: 312 iTrader: 0 reviews	04 udp ? which are the best under drive pullys for a 04 gt. do you have to change the belt, how much is a belt. how hard is it to do yourself

June 4th, 2008, 04:55 PM	#2
MATT02GT MM Fanatic Join Date: May 2007 Location: Colo. Springs, CO Posts: 3,687 iTrader: 0 reviews	They arent too bad to install... Just need a pulley puller and some mechanical knowledge. They best ones replace the whole crank pulley instead of the "piggyback" style ones. I think the Steedas are the replace style __________________ Its not how fast you drive, but how you drive fast. 2002 Mustang GT... Just The Usual Bolt-Ons Bolt on list in Garage..

June 4th, 2008, 04:58 PM	#3
DeMello Banned Join Date: Apr 2008 Location: Florida Posts: 3,965 iTrader: 1 reviews	steeda ftw __________________ Just Another Bolt on GT [IMG]http://i45.tinypic.com/54f5ua.jpg[/IMG] Stock Longblock - 287/276 Low 12s NA! 10s on the spray?

June 4th, 2008, 05:14 PM	#5
White99stang MM's nicest mod, :) Join Date: Aug 2005 Location: Apex, NC Posts: 3,718 iTrader: 0 reviews	but the steeda ones you can buy have the sfi approved damper. And to run certain times you need a sfi approved damper which the stock one is not. __________________ 06 Dodge MegaCab Diesel 455rwhp/815rwtq REAL TRUCKS DON'T USE SPARK PLUGS

June 4th, 2008, 05:18 PM	#6
mustangjl Regular 2002 mustang gt 13.5 @ 106 Join Date: Nov 2007 Location: dawsonville Posts: 266 iTrader: 2 reviews	steeda worked with ford to get the right damping characteristics. so no harm would be done to your engine. __________________ mods: flowmaster catback,75mm tb,3.73,sct x3,turbo 70mm-10psi,3 core intercooler,injected engineering tune,mph blower cams. 450hp/460tq fastest et 13.3@114 bowties are for little boys

June 5th, 2008, 10:10 AM	#8
MIKE 04 GT Regular 04 MUSTANG GT 14.5 @ 97.2 Join Date: Oct 2007 Location: SC Posts: 312 iTrader: 0 reviews	where is the best place to buy them. will it help on gas any or not.

June 5th, 2008, 10:48 AM	#10
GTsetGO Cigar Assassin 2004 Mustang GT 12.88 @ 112 Join Date: Aug 2005 Location: A Galaxy Far, Far Away Posts: 13,884 iTrader: 10 reviews	i have the steeda UDP's on my 04. __________________ Cigar Samplers for Sale

June 5th, 2008, 11:40 AM	#11
bigbadwollfff04 Regular Join Date: Apr 2007 Location: New Hampshire Posts: 168 iTrader: 1 reviews	i have steeda's on my 04 also, got from american muscle!! work just fine __________________ Aww, did I step on your poor little bitty ego?

June 5th, 2008, 03:11 PM	#12
99mustanggtman Hardcore Enthusiast 1999 GT Join Date: Feb 2007 Location: Germantown, MD/ OSU Posts: 1,835 iTrader: 7 reviews	stock, underdrive pulleys are a joke for the minimal gains they produce __________________ Single 67mm turbo, ported pi heads, edelbrock vic jr. manifold w/HPP plenum, terminator shortblock, return fuel system... Goal 600+ rwhp.

June 6th, 2008, 06:32 PM	#13
KhaosGT Enthusiast 2004 Mustang GT Join Date: Jan 2007 Location: Fort Worth, TX Posts: 970 iTrader: 0 reviews	i went with steeda and it only took me about 45 minutes to install, i got them from AM __________________ 2004 Black Mustang Gt When I see a 5.0...I respect my elders.

June 7th, 2008, 02:38 AM	#14
06z28eaTer Hardcore Enthusiast 2006 GT / 1999 Cobra Join Date: Jan 2008 Location: Memphis, TN Posts: 1,177 iTrader: 0 reviews	ive had mine for awhile now but havent installed, but i went with steeda __________________ -2003 TERMINATOR- -2006 MUSTANG GT-

June 7th, 2008, 09:31 AM	#15
KhaosGT Enthusiast 2004 Mustang GT Join Date: Jan 2007 Location: Fort Worth, TX Posts: 970 iTrader: 0 reviews	steeda is the way to go with underdrive pulleys imo....there is a install video of a guy putting them in his stang and it talks about how steeda worked with ford to make the udps i have had mine in for several months and they have performed with oem quality and a decent gain in power __________________ 2004 Black Mustang Gt When I see a 5.0...I respect my elders.

June 27th, 2008, 10:08 PM	#17
superbeef1000 Hardcore Enthusiast Join Date: Aug 2006 Location: mesa , arizona Posts: 1,475 iTrader: 2 reviews	dose any one have a picture of the water pump steeda pully for the short shaft water pump i just got a used set for 100 bucks and need to be sure if i have the correct water pump pully __________________ a bunch of stuff to make my car faster http://www.moddedmustangs.com/forums...e-member-1497/

June 27th, 2008, 10:34 PM	#18
superbeef1000 Hardcore Enthusiast Join Date: Aug 2006 Location: mesa , arizona Posts: 1,475 iTrader: 2 reviews	bump........... any one __________________ a bunch of stuff to make my car faster http://www.moddedmustangs.com/forums...e-member-1497/

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: 04 udp ?
Thread	Thread Starter	Forum	Replies	Last Post
UDP probelm...anybody else?	Ho_Edge	2005 - 2010	25	March 30th, 2008 10:00 PM
Steeda UDP	2006GTARPD3	2005 - 2010	27	March 27th, 2008 06:32 PM
Udp ??	Black02GT	4V / SVT	29	February 23rd, 2008 01:54 PM
UDP Help!	Solidus08	V6 Mustangs	17	February 19th, 2008 11:55 AM
udp	Downtown02	General Tech	2	March 25th, 2007 12:05 PM

All times are GMT -4. The time now is 11:57 PM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.