Pypes o/r x

zinc02GT · June 24th, 2008, 05:26 PM

Is there anyhting I need to look out for with this midpipe?

Do they fit like they should?
do they hang low?
will I only need MILs or both MILs and o2 extensions?

MATT02GT · June 24th, 2008, 05:27 PM

Ive heard good things about them. Should only need the MIL eliminators

blkONblk02GT · June 24th, 2008, 05:28 PM

Mine fit like shit and leaks. It wouldnt bolt up to my flowmaster catback. For the money its good and sounds nice. I just gotta take it to the muffler shop and have them tweak it.

zinc02GT · June 24th, 2008, 05:49 PM

i have the stock catback with flows welded in

should fit alright right?

oh2swapped · June 24th, 2008, 06:16 PM

I have the O/R X from pypes mine fit with ease love the sound it hangs a little low but not too bad.

zinc02GT · June 24th, 2008, 06:26 PM

im trying to look around. trying to find best deal. Im on a budget

Im thinking pypes, BBK, or UPR o/r Xs

oh2swapped · June 24th, 2008, 06:28 PM

pypes FTW you wont be disappointed

PowerShiftz02GT · June 24th, 2008, 06:30 PM

you will need mills, No extensions. Although i didnt go through pypes but my Mac went right up. and i didnt need any extensions. Also make sure you disconnect the battery so you dont get shocked if you didnt know and if the Pipe comes with a Paper gasket then go get an OEM gasket, I HIGHLY Recommend this! The Paper ones will blow out in 20 minutes.

zinc02GT · June 24th, 2008, 06:31 PM

i wont be disappointed with any of em im sure its just im tight on money and always will be. Im just that way

between those companies I will wait for the best deal and choose when it comeds up

right now theres 2 for sale in the classified section and Ive pmed both of them

ones only 50 bucks

zinc02GT · June 24th, 2008, 06:32 PM

Originally Posted by PowerShiftz02GT

you will need mills, No extensions. Although i didnt go through pypes but my Mac went right up. and i didnt need any extensions. Also make sure you disconnect the battery so you dont get shocked if you didnt know and if the Pipe comes with a Paper gasket then go get an OEM gasket, I HIGHLY Recommend this! The Paper ones will blow out in 20 minutes.

LOL i remember your thread. Yeah Ill do that. Advanced Auto Parts carry em?

PowerShiftz02GT · June 24th, 2008, 06:38 PM

haha yeah that was a nightmare.... A freakin 30 minute install ended up taking 3 weeks haha.

they might. I know autozone carries them the OEM one. But you may have to order it. They told me it would take them 2 days to get the part in which is pretty fast.

thewayshemoves · June 24th, 2008, 06:40 PM

I have the pypes o/r x pipe, with factory catback and flowmasters welded in. it fits nice to the factory dome thing back there. it does hang a little low, but not terribly bad. I don't really mind how the underside of my car looks so I used some metal strapping to hold it up a little bit just for my own desire. you won't be disappointed with it, I'm still going to weld the seams up just beacuse I don't trust the bolts and connector flanges.

BLK01SS · June 24th, 2008, 06:44 PM

Jegs sells a Dynomax o/r X pipe for $140 shipped, thats the best deal I could find.

zinc02GT · June 24th, 2008, 06:45 PM

Originally Posted by PowerShiftz02GT

haha yeah that was a nightmare.... A freakin 30 minute install ended up taking 3 weeks haha.

they might. I know autozone carries them the OEM one. But you may have to order it. They told me it would take them 2 days to get the part in which is pretty fast.

sweet because I dont want to get raped by the stealership...

I think Im really gonna go through with its this time. Normally there is always one hting that pops up and keeps me from getting it.

I hope my parents wont be too pissed lol

zinc02GT · June 24th, 2008, 06:46 PM

Originally Posted by BLK2KGT

Jegs sells a Dynomax o/r X pipe for $140 shipped, thats the best deal I could find.

...but does it fit right?

thats why Im asking questions. I dont any exhaust leaks that I need to get welded. Id hate it

40thmustanggt · June 24th, 2008, 06:48 PM

i have the pypes o/r x pipe and ive took it off about 5 times and i still have no leaks fits great but it does hang alittle low like everyone is saying.. no big deal though.

zinc02GT · June 24th, 2008, 06:49 PM

does it hang lower than youd expect LTs to hang? If its the same as LTs I dunno about it... those hang a little too low for me as I DO go over a few speedbumps from time to time. plus my drive way has a huge bump on on end. Its a loop driveway.

thewayshemoves · June 24th, 2008, 06:49 PM

my pypes o/r x pipe fit on perfect...for what it's worth...

I didn't need the 02 extenders, I did have to take one of the front 02 brackets that holds the wire down out to get one of them to reach, but it all was rather easy. I did mine myself in about 3 hours. Definitely get some water displacement or the bolts are hopeless to get off.

zinc02GT · June 24th, 2008, 06:51 PM

Ive taken it off before. Clutch and transmission rebuild

I could prolly get the mid pipe off and the new on on and running in an hour or less...

Ive got all the little tricks and all that down... I know when to use the swivels and where to slide the extensions

do mils go where the FRONT O2s are?

thewayshemoves · June 24th, 2008, 06:57 PM

man I had to build this crazy swiveling extension monster, haha. we called it frankenrachet, it was so ridiculous, because the socket I had didn't fit the ratchet, so it was just a mass of swiels, extenders, adapters and shit...haha, it was fun putting my x pipe on.

June 24th, 2008, 05:26 PM	#1
zinc02GT HUGE RED HEADED DUDE W/FIVE-OH 2011 Mustang GT 12.1 @ 116 Join Date: Dec 2007 Location: Alabama Posts: 5,847 iTrader: 1 reviews	Pypes o/r x Is there anyhting I need to look out for with this midpipe? Do they fit like they should? do they hang low? will I only need MILs or both MILs and o2 extensions? __________________ Mods in garage. Built suspension and gears since posted times.

June 24th, 2008, 05:27 PM	#2
MATT02GT The Mean Green Join Date: May 2007 Location: Colo. Springs, CO Posts: 4,164 iTrader: 1 reviews	Ive heard good things about them. Should only need the MIL eliminators __________________ Its not how fast you drive, but how you drive fast. 2002 Mustang GT... Just The Usual Bolt-Ons Bolt on list in Garage..

June 24th, 2008, 05:28 PM	#3
blkONblk02GT Regular 2002 GT Join Date: Oct 2007 Location: Milwaukee, WI Posts: 69 iTrader: 0 reviews	Mine fit like shit and leaks. It wouldnt bolt up to my flowmaster catback. For the money its good and sounds nice. I just gotta take it to the muffler shop and have them tweak it. __________________ "I drink for today, i drink for tomorrow, i need another drink... do ya have any money i can borrow?"

June 24th, 2008, 05:49 PM	#4
zinc02GT HUGE RED HEADED DUDE W/FIVE-OH 2011 Mustang GT 12.1 @ 116 Join Date: Dec 2007 Location: Alabama Posts: 5,847 iTrader: 1 reviews	i have the stock catback with flows welded in should fit alright right? __________________ Mods in garage. Built suspension and gears since posted times.

June 24th, 2008, 06:16 PM	#5
oh2swapped Regular 02 Mustang GT 17.8@52 Join Date: Sep 2007 Location: Land O Lakes FL Posts: 338 iTrader: 1 reviews	I have the O/R X from pypes mine fit with ease love the sound it hangs a little low but not too bad. __________________ NEXT TO SEX, MY MUSTANG IS BEST

June 24th, 2008, 06:26 PM	#6
zinc02GT HUGE RED HEADED DUDE W/FIVE-OH 2011 Mustang GT 12.1 @ 116 Join Date: Dec 2007 Location: Alabama Posts: 5,847 iTrader: 1 reviews	im trying to look around. trying to find best deal. Im on a budget Im thinking pypes, BBK, or UPR o/r Xs __________________ Mods in garage. Built suspension and gears since posted times.

June 24th, 2008, 06:28 PM	#7
oh2swapped Regular 02 Mustang GT 17.8@52 Join Date: Sep 2007 Location: Land O Lakes FL Posts: 338 iTrader: 1 reviews	pypes FTW you wont be disappointed __________________ NEXT TO SEX, MY MUSTANG IS BEST

June 24th, 2008, 06:30 PM	#8
PowerShiftz02GT MM Fanatic 2002 Mustang GT Join Date: Nov 2007 Location: Michigan Posts: 4,204 iTrader: 13 reviews	you will need mills, No extensions. Although i didnt go through pypes but my Mac went right up. and i didnt need any extensions. Also make sure you disconnect the battery so you dont get shocked if you didnt know and if the Pipe comes with a Paper gasket then go get an OEM gasket, I HIGHLY Recommend this! The Paper ones will blow out in 20 minutes. __________________

June 24th, 2008, 06:31 PM	#9
zinc02GT HUGE RED HEADED DUDE W/FIVE-OH 2011 Mustang GT 12.1 @ 116 Join Date: Dec 2007 Location: Alabama Posts: 5,847 iTrader: 1 reviews	i wont be disappointed with any of em im sure its just im tight on money and always will be. Im just that way between those companies I will wait for the best deal and choose when it comeds up right now theres 2 for sale in the classified section and Ive pmed both of them ones only 50 bucks __________________ Mods in garage. Built suspension and gears since posted times.

June 24th, 2008, 06:38 PM	#11
PowerShiftz02GT MM Fanatic 2002 Mustang GT Join Date: Nov 2007 Location: Michigan Posts: 4,204 iTrader: 13 reviews	haha yeah that was a nightmare.... A freakin 30 minute install ended up taking 3 weeks haha. they might. I know autozone carries them the OEM one. But you may have to order it. They told me it would take them 2 days to get the part in which is pretty fast. __________________

June 24th, 2008, 06:48 PM	#16
40thmustanggt Hardcore Enthusiast Join Date: Jun 2007 Location: southcarolina Posts: 1,354 iTrader: 0 reviews	i have the pypes o/r x pipe and ive took it off about 5 times and i still have no leaks fits great but it does hang alittle low like everyone is saying.. no big deal though. __________________

June 24th, 2008, 06:49 PM	#17
zinc02GT HUGE RED HEADED DUDE W/FIVE-OH 2011 Mustang GT 12.1 @ 116 Join Date: Dec 2007 Location: Alabama Posts: 5,847 iTrader: 1 reviews	does it hang lower than youd expect LTs to hang? If its the same as LTs I dunno about it... those hang a little too low for me as I DO go over a few speedbumps from time to time. plus my drive way has a huge bump on on end. Its a loop driveway. __________________ Mods in garage. Built suspension and gears since posted times.

June 24th, 2008, 06:51 PM	#19
zinc02GT HUGE RED HEADED DUDE W/FIVE-OH 2011 Mustang GT 12.1 @ 116 Join Date: Dec 2007 Location: Alabama Posts: 5,847 iTrader: 1 reviews	Ive taken it off before. Clutch and transmission rebuild I could prolly get the mid pipe off and the new on on and running in an hour or less... Ive got all the little tricks and all that down... I know when to use the swivels and where to slide the extensions do mils go where the FRONT O2s are? __________________ Mods in garage. Built suspension and gears since posted times.

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

LinkBacks (?) LinkBack to this Thread: http://www.moddedmustangs.com/forums/99-04/77310-pypes-o-r-x.html
Posted By	For	Type	Date
Pypes o/r x	This thread	Refback	June 26th, 2008 12:30 AM

Threads Similar to: Pypes o/r x
Thread	Thread Starter	Forum	Replies	Last Post
pypes	2000roush	4V / SVT	2	June 3rd, 2008 09:51 PM
To everyone with a pypes O/R X	03BMstang	99-04	8	May 15th, 2008 08:27 AM
my v6 with pypes mid muffler and pypes x pipe	tsp_2177	Videos	1	March 29th, 2008 12:06 AM
pypes	ZoomZoomMFer	96-98	30	January 17th, 2008 10:21 PM
pypes?	mystang0673	2005 - 2010	9	March 7th, 2007 07:20 AM

All times are GMT -4. The time now is 10:54 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.