chin spoiler question

XPLICITSTANG · June 29th, 2008, 04:39 AM

i have a v6 w/ a mach 1 chin spoiler but am going to replace the bumper to a 03-04 cobra front bumper would the mach chin spoiler fit the cobra bumper

SWEET2KSTANG · June 29th, 2008, 04:40 AM

if i remember right, the mach chin is not long enough. there are chin spoilers out specific for the cobra bumper i believe.

6DXR · June 29th, 2008, 04:41 AM

Well the 99-04 fits the 99-01 Cobra. So I'm guessing since the bumper is new it probably wouldn't fit.. :/

XPLICITSTANG · June 29th, 2008, 04:44 AM

dam that means i might need to buy another chin spoiler or does the cobra bumper look good without the spoiler

6DXR · June 29th, 2008, 04:49 AM

I don't think chin spoilers add too much to a car. If I were you I would buy the bumper, put it on, see how you like it and from there decide about the spoiler. But I think it would be just fine without it.

XPLICITSTANG · June 29th, 2008, 05:13 AM

well my stupid cousin hit my car on the passenger fender and the front bumper so thats my excuse to change this parts cause my car looked just fine with a chin spoiler that i bought in americanmuscle.com

6DXR · June 29th, 2008, 05:13 AM

Ah. Well the cobra bumper will look fine without the chin spoiler.

XPLICITSTANG · June 29th, 2008, 05:15 AM

yeah i might just get what i have but in new am still thinking lol cash is low

6DXR · June 29th, 2008, 05:17 AM

I hear ya brother.

inkoholic · June 29th, 2008, 01:57 PM

no it will look like ass..do like i did and sell the mach to a buddy with a gt bumper and spend the extra money on the cobra chin the bumper already has the tabs and holes for it..

energiesource · June 29th, 2008, 03:19 PM

imo id rather spend an extra $100 on a chin spoiler than an extra $500 getting a new cobra bumper in the event of a speed bump or something.

travis_afx · June 29th, 2008, 03:20 PM

The mach spoilers and the termi spoilers are totally different.

IMO the termi bumper just doesn't look as good without the spoiler, they don't necceserially look "bad" but they just don't look as good as they could.

XPLICITSTANG · July 8th, 2008, 01:00 PM

Originally Posted by inkoholic

no it will look like ass..do like i did and sell the mach to a buddy with a gt bumper and spend the extra money on the cobra chin the bumper already has the tabs and holes for it..

YEAH I WAS THINKING THAT

Drgnracin72 · July 8th, 2008, 01:52 PM

to whoever said they dont add much to the car. they sure made my car look a helluva lot better

torchedmach · July 8th, 2008, 01:55 PM

heres a pic of my buddies 6r with a cobra front

03SonicBoom · July 8th, 2008, 03:11 PM

If you're gonna sell the chin spoiler PM me and let me know any details (price, pictures, scratches, etc.)

Abe02GT · July 8th, 2008, 08:58 PM

Originally Posted by drgnracin72

to whoever said they dont add much to the car. they sure made my car look a helluva lot better

Word! Mach1 chin spoiler makes stock bumper look way better!

XPLICITSTANG · July 9th, 2008, 02:20 PM

Originally Posted by torchedmach

heres a pic of my buddies 6r with a cobra front

THAT LOOKS HOT

XPLICITSTANG · July 9th, 2008, 02:21 PM

Originally Posted by 03SonicBoom

If you're gonna sell the chin spoiler PM me and let me know any details (price, pictures, scratches, etc.)

ILL LET YOU KNOW am still thinking if am gonna claim thru the insurance but i dont want that thing to go up

torchedmach · July 9th, 2008, 02:27 PM

its quik 2 hes got a god awful amount of shit in that car including a 8.8 swap with 31 spline moser axles a 3:73 detriot tru lock locker king cobra stage 3 clutch and a 150 shot of zex

June 29th, 2008, 04:39 AM	#1
XPLICITSTANG Regular 99 MUSTANG 3.8 Join Date: Dec 2007 Location: TEXAS Posts: 329	chin spoiler question i have a v6 w/ a mach 1 chin spoiler but am going to replace the bumper to a 03-04 cobra front bumper would the mach chin spoiler fit the cobra bumper

June 29th, 2008, 04:40 AM	#2
SWEET2KSTANG I Post Entirely Way Too Much 2000 mustang gt 11.79@115.83 Join Date: Oct 2006 Location: N.W. AR Posts: 5,027	if i remember right, the mach chin is not long enough. there are chin spoilers out specific for the cobra bumper i believe. __________________ stock long block, bolt ons, slicks, and a little squeeze N/A-12.81@103.7 N2O-11.79@115.8 parting out 04 cobra, pm me for details

June 29th, 2008, 04:41 AM	#3
6DXR Hardcore Enthusiast 2007 Mustang 4.0 65.3@37..Shootin For The 9's Next Time Join Date: May 2008 Location: In Bed With Safi's Sister.. Posts: 1,053	Well the 99-04 fits the 99-01 Cobra. So I'm guessing since the bumper is new it probably wouldn't fit.. :/ __________________ 2007 V6. RED. BONE STOCK. 5 SPEED FR500's Wrapped In Sumitomo 285 and 265's Rear Blackout Panel...Oh and a fancy Hurst Shift Knob Red Mustang Society

June 29th, 2008, 04:49 AM	#5
6DXR Hardcore Enthusiast 2007 Mustang 4.0 65.3@37..Shootin For The 9's Next Time Join Date: May 2008 Location: In Bed With Safi's Sister.. Posts: 1,053	I don't think chin spoilers add too much to a car. If I were you I would buy the bumper, put it on, see how you like it and from there decide about the spoiler. But I think it would be just fine without it. __________________ 2007 V6. RED. BONE STOCK. 5 SPEED FR500's Wrapped In Sumitomo 285 and 265's Rear Blackout Panel...Oh and a fancy Hurst Shift Knob Red Mustang Society

June 29th, 2008, 05:13 AM	#7
6DXR Hardcore Enthusiast 2007 Mustang 4.0 65.3@37..Shootin For The 9's Next Time Join Date: May 2008 Location: In Bed With Safi's Sister.. Posts: 1,053	Ah. Well the cobra bumper will look fine without the chin spoiler. __________________ 2007 V6. RED. BONE STOCK. 5 SPEED FR500's Wrapped In Sumitomo 285 and 265's Rear Blackout Panel...Oh and a fancy Hurst Shift Knob Red Mustang Society

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

June 29th, 2008, 04:44 AM	#4
XPLICITSTANG Regular 99 MUSTANG 3.8 Join Date: Dec 2007 Location: TEXAS Posts: 329	dam that means i might need to buy another chin spoiler or does the cobra bumper look good without the spoiler

June 29th, 2008, 05:15 AM	#8
XPLICITSTANG Regular 99 MUSTANG 3.8 Join Date: Dec 2007 Location: TEXAS Posts: 329	yeah i might just get what i have but in new am still thinking lol cash is low

June 29th, 2008, 05:17 AM	#9
6DXR Hardcore Enthusiast 2007 Mustang 4.0 65.3@37..Shootin For The 9's Next Time Join Date: May 2008 Location: In Bed With Safi's Sister.. Posts: 1,053	I hear ya brother. __________________ 2007 V6. RED. BONE STOCK. 5 SPEED FR500's Wrapped In Sumitomo 285 and 265's Rear Blackout Panel...Oh and a fancy Hurst Shift Knob Red Mustang Society

June 29th, 2008, 01:57 PM	#10
inkoholic Newbie Join Date: Apr 2008 Posts: 49	no it will look like ass..do like i did and sell the mach to a buddy with a gt bumper and spend the extra money on the cobra chin the bumper already has the tabs and holes for it.. __________________

June 29th, 2008, 03:19 PM	#11
energiesource Hardcore Enthusiast Join Date: Oct 2006 Location: Up der in canada eh Posts: 2,672	imo id rather spend an extra $100 on a chin spoiler than an extra $500 getting a new cobra bumper in the event of a speed bump or something. __________________ 2000 Mustang GT, Steeda Triax shifter, Underdrive pulleys, SLP LM2, MAC L/T and O/R H-pipe. Transmission fix, new clutch Coming soon: Brakes.

June 29th, 2008, 03:20 PM	#12
travis_afx Moderator '02 GT Join Date: May 2007 Location: OK Posts: 1,165	The mach spoilers and the termi spoilers are totally different. IMO the termi bumper just doesn't look as good without the spoiler, they don't necceserially look "bad" but they just don't look as good as they could. __________________ BBK CAI, 75mm BBK TB, Trick Flow plenum, U/DP, spec clutch, short throw shifter, adj. upper cntrl arms, lower cntrl arms, 50/50 shocks, MAC exhaust, 4.10s, SCT flip switch

July 8th, 2008, 01:52 PM	#14
Drgnracin72 Slayer of Douchebags mustangless Join Date: Jan 2006 Location: PURCELL, OKLAHOMA Posts: 9,355	to whoever said they dont add much to the car. they sure made my car look a helluva lot better __________________ NUKE THE UNBORN GAY BABY WHALES FOR JESUS

July 8th, 2008, 01:55 PM	#15
torchedmach Enthusiast 2004 F-250 PSD 1/8th 9.256 77mph Join Date: Feb 2008 Location: Stafford, VA Posts: 772	heres a pic of my buddies 6r with a cobra front __________________ NOBAMA 08 MM Truck Crew (Founder) MM Mach 1 Crew (Founder)

July 8th, 2008, 03:11 PM	#16
03SonicBoom Regular 2003 Mustang GT Join Date: Jul 2008 Location: Indiana Posts: 199	If you're gonna sell the chin spoiler PM me and let me know any details (price, pictures, scratches, etc.)

Threads Similar to: chin spoiler question
Thread	Thread Starter	Forum	Replies	Last Post
front chin spoiler question	Tmac3320	99-04	19	August 3rd, 2008 03:02 AM
Chin Spoiler Question	1996gt	96-98	20	June 4th, 2008 10:08 AM
question about chin spoiler	03BMstang	99-04	5	May 7th, 2008 09:35 PM
Chin spoiler question	03BMstang	99-04	21	January 17th, 2008 06:28 AM
Chin Spoiler Question!	JAY'SRED02	2005+	24	July 4th, 2007 09:13 PM

All times are GMT -4. The time now is 07:43 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.

July 9th, 2008, 02:27 PM	#20
torchedmach Enthusiast 2004 F-250 PSD 1/8th 9.256 77mph Join Date: Feb 2008 Location: Stafford, VA Posts: 772	its quik 2 hes got a god awful amount of shit in that car including a 8.8 swap with 31 spline moser axles a 3:73 detriot tru lock locker king cobra stage 3 clutch and a 150 shot of zex __________________ NOBAMA 08 MM Truck Crew (Founder) MM Mach 1 Crew (Founder)