I need Roush short throw help ASAP!

thewayshemoves · July 3rd, 2008, 11:54 PM

as my other post "did i miss something" states, I cannot get this roush arm to go into the roush short throw base...there's not threads, and there's no nuts or bolts that came with it (brand new)...did I miss something? or am I really supposed to have to supply my own bolts and nuts to get the two to fit together? I have work at 545 in the morning it's 10pm and I've been working on this short throw for 4 hours...this fucking 30 minute short throw install...for 4 hours...it took me 3 of them just to get the stock one off...the up under the car with a hammer and flathead didn't work, the yanking the shit out of it didn't work...I finally tied a rope around it and me and a friend jerked the shit out of it...I have never in my life put in a short throw as ridiculously stupid as the one in this car...please tell me I'm missing something and I don't have to break into a hardware store for two nuts and two bolts just so I'll have a car for work...p.s. I broke the stock one, so that's a no go...

BLK2KGT · July 4th, 2008, 12:00 AM

Can you get a pic so we can see what your workin with?

thewayshemoves · July 4th, 2008, 12:02 AM

yeah give me a sec

thewayshemoves · July 4th, 2008, 01:25 AM

Nevermind, I got some bolts and nuts out of the 240 and made it work...thanks for the help though.

BLK2KGT · July 4th, 2008, 01:27 AM

Cool good job lets see how that shifter looks anyway

mrbigjeep · July 4th, 2008, 01:28 AM

thats good to know...post up pics

thewayshemoves · July 4th, 2008, 04:38 PM

alright I'm on dial up haha, I'm trying.

KhaosGT · July 4th, 2008, 07:47 PM

how does that shifter handle? i thought about getting one

6DXR · July 4th, 2008, 07:49 PM

Pics?

thewayshemoves · July 5th, 2008, 11:27 PM

Stewie88 · July 5th, 2008, 11:29 PM

sweetness but you should think about cleaning your interior

6DXR · July 6th, 2008, 02:50 AM

Looks cool man!

July 3rd, 2008, 11:54 PM	#1
thewayshemoves Enthusiast 2003 GT Join Date: Nov 2006 Location: Leighton, Alabama Posts: 809	I need Roush short throw help ASAP! as my other post "did i miss something" states, I cannot get this roush arm to go into the roush short throw base...there's not threads, and there's no nuts or bolts that came with it (brand new)...did I miss something? or am I really supposed to have to supply my own bolts and nuts to get the two to fit together? I have work at 545 in the morning it's 10pm and I've been working on this short throw for 4 hours...this fucking 30 minute short throw install...for 4 hours...it took me 3 of them just to get the stock one off...the up under the car with a hammer and flathead didn't work, the yanking the shit out of it didn't work...I finally tied a rope around it and me and a friend jerked the shit out of it...I have never in my life put in a short throw as ridiculously stupid as the one in this car...please tell me I'm missing something and I don't have to break into a hardware store for two nuts and two bolts just so I'll have a car for work...p.s. I broke the stock one, so that's a no go... __________________ SCT chip, 4.30's, Flowmaster w/ Turndowns, Trick Flow Plenum, BBK 70mm Throttle Body, Pypes X-pipe, BBK CAI, 100 shot and nitto radials (obtained).

July 4th, 2008, 12:00 AM	#2
BLK2KGT Enthusiast 2000 Mustang GT 1/8 7.95@82.43 Join Date: May 2008 Location: Mobile, Alabama Posts: 659	Can you get a pic so we can see what your workin with? __________________ If you're not 1st you're last -Ricky Bobby Topless Mustang Club Founder

July 4th, 2008, 12:02 AM	#3
thewayshemoves Enthusiast 2003 GT Join Date: Nov 2006 Location: Leighton, Alabama Posts: 809	yeah give me a sec __________________ SCT chip, 4.30's, Flowmaster w/ Turndowns, Trick Flow Plenum, BBK 70mm Throttle Body, Pypes X-pipe, BBK CAI, 100 shot and nitto radials (obtained).

July 4th, 2008, 01:25 AM	#4
thewayshemoves Enthusiast 2003 GT Join Date: Nov 2006 Location: Leighton, Alabama Posts: 809	Nevermind, I got some bolts and nuts out of the 240 and made it work...thanks for the help though. __________________ SCT chip, 4.30's, Flowmaster w/ Turndowns, Trick Flow Plenum, BBK 70mm Throttle Body, Pypes X-pipe, BBK CAI, 100 shot and nitto radials (obtained).

July 4th, 2008, 01:27 AM	#5
BLK2KGT Enthusiast 2000 Mustang GT 1/8 7.95@82.43 Join Date: May 2008 Location: Mobile, Alabama Posts: 659	Cool good job lets see how that shifter looks anyway __________________ If you're not 1st you're last -Ricky Bobby Topless Mustang Club Founder

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

July 4th, 2008, 01:28 AM	#6
mrbigjeep Enthusiast 04 mustang gt 8.873 @ 79.218 Join Date: Apr 2008 Location: upstate sc Posts: 693	thats good to know...post up pics

July 4th, 2008, 04:38 PM	#7
thewayshemoves Enthusiast 2003 GT Join Date: Nov 2006 Location: Leighton, Alabama Posts: 809	alright I'm on dial up haha, I'm trying. __________________ SCT chip, 4.30's, Flowmaster w/ Turndowns, Trick Flow Plenum, BBK 70mm Throttle Body, Pypes X-pipe, BBK CAI, 100 shot and nitto radials (obtained).

July 4th, 2008, 07:47 PM	#8
KhaosGT Enthusiast 2004 Mustang GT Join Date: Jan 2007 Location: Fort Worth, TX Posts: 819	how does that shifter handle? i thought about getting one __________________ 2004 Black Mustang Gt "I'm a agent of chaos" -Joker,Dark Knight

July 4th, 2008, 07:49 PM	#9
6DXR Hardcore Enthusiast 2007 Mustang 4.0 65.3@37..Shootin For The 9's Next Time Join Date: May 2008 Location: In Bed With Safi's Sister.. Posts: 1,053	Pics? __________________ 2007 V6. RED. BONE STOCK. 5 SPEED FR500's Wrapped In Sumitomo 285 and 265's Rear Blackout Panel...Oh and a fancy Hurst Shift Knob Red Mustang Society

July 5th, 2008, 11:27 PM	#10
thewayshemoves Enthusiast 2003 GT Join Date: Nov 2006 Location: Leighton, Alabama Posts: 809	__________________ SCT chip, 4.30's, Flowmaster w/ Turndowns, Trick Flow Plenum, BBK 70mm Throttle Body, Pypes X-pipe, BBK CAI, 100 shot and nitto radials (obtained).

July 5th, 2008, 11:29 PM	#11
Stewie88 Regular 03 GT Join Date: Jul 2008 Location: Corpus Christi Posts: 113	sweetness but you should think about cleaning your interior __________________ 2003 GT vert 5-speed K&N, PRO 5.0 shifter, shorty headers, o/r x-pipe, SLP IIs, 4.10s, 17x9 and 17x10.5 DD bullits, Nitto DRs

July 6th, 2008, 02:50 AM	#12
6DXR Hardcore Enthusiast 2007 Mustang 4.0 65.3@37..Shootin For The 9's Next Time Join Date: May 2008 Location: In Bed With Safi's Sister.. Posts: 1,053	Looks cool man! __________________ 2007 V6. RED. BONE STOCK. 5 SPEED FR500's Wrapped In Sumitomo 285 and 265's Rear Blackout Panel...Oh and a fancy Hurst Shift Knob Red Mustang Society

Threads Similar to: I need Roush short throw help ASAP!
Thread	Thread Starter	Forum	Replies	Last Post
used short throw	03TropicGt	99-04	3	May 29th, 2008 02:08 AM
Best short throw?	silverstang	2005+	37	April 15th, 2008 11:26 PM
Short throw.	Elder	4V / SVT	8	March 1st, 2008 10:41 AM
Short throw	AnglicoGT98	99-04	9	January 16th, 2008 12:43 PM
Roush short throw shifter install	new2mustangs	99-04	5	October 4th, 2007 09:00 PM

All times are GMT -4. The time now is 03:41 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.