Tools Required to Install Plenum/TB and Shifter

proto89 · July 17th, 2008, 11:03 PM

Hey guys, would any of you know the EXACT tools needed to do the tasks above? I've done the install before but do not remember the socket sizes, etc.

Thanks
Al

JStang14 · July 17th, 2008, 11:09 PM

i dont remember the tbody but im pretty sure hte shifter you need a 10mm and 13mm socket and an extension to make it easier

JStang14 · July 17th, 2008, 11:10 PM

oh and some silicone to seal it back on

proto89 · July 17th, 2008, 11:11 PM

Originally Posted by JStang14

oh and some silicone to seal it back on

Got the RTV, thanks for the socket numbers

jivepepper · July 17th, 2008, 11:14 PM

Torch and hammer!

mikeGTmurr46 · July 18th, 2008, 12:27 AM

the plenum should be an 8mm and a 10mm, and is it me or does that yellow car look like a camaro

BLK2KGT · July 18th, 2008, 12:47 AM

Nah I think it looks like a mustang lol

94pacecarSVT · July 18th, 2008, 01:17 AM

i think it looks like both. but the front end looks a lot better. haha.

SWEET2KSTANG · July 18th, 2008, 02:29 AM

that front end just ruined a decent car.

NavySeabee87 · July 18th, 2008, 04:45 AM

you cant mix chevy and ford, wtf dude.....wtf

mikeGTmurr46 · July 18th, 2008, 06:49 PM

this is a chevy gone right though

Ron DeRaad's '68 Chevy Rs Camaro - Popular Hot Rodding Magazine

gray8188 · July 18th, 2008, 07:56 PM

Originally Posted by mikeGTmurr46

this is a chevy gone right though Ron DeRaad's '68 Chevy Rs Camaro - Popular Hot Rodding Magazine

that is a clean car

July 17th, 2008, 11:03 PM	#1
proto89 Enthusiast 2004 Mustang GT 14.2@100.12 Join Date: Oct 2007 Location: Orlando Posts: 582	Tools Required to Install Plenum/TB and Shifter Hey guys, would any of you know the EXACT tools needed to do the tasks above? I've done the install before but do not remember the socket sizes, etc. Thanks Al __________________ Professor Proto

July 17th, 2008, 11:14 PM	#5
jivepepper Hardcore Enthusiast Join Date: Mar 2006 Location: Under a sombrero Posts: 1,762	Torch and hammer! __________________ Spending money I don't have, on parts I don't need. to impress people I don't know.... 2k MUSTANG GT 598/531 RWHP/RWTQ Just a little S-trim....

July 18th, 2008, 12:27 AM	#6
mikeGTmurr46 Regular 2000 Mustang GT 13.7@101 Join Date: Nov 2007 Location: South Jersey Posts: 156	the plenum should be an 8mm and a 10mm, and is it me or does that yellow car look like a camaro __________________ Studies show that 92% of kids listen to rap. If you are one of the 8% who still listens to real music put this in your signature.

July 18th, 2008, 12:47 AM	#7
BLK2KGT Enthusiast 2000 Mustang GT 1/8 7.95@82.43 Join Date: May 2008 Location: Mobile, Alabama Posts: 654	Nah I think it looks like a mustang lol __________________ If you're not 1st you're last -Ricky Bobby Topless Mustang Club Founder

July 18th, 2008, 01:17 AM	#8
94pacecarSVT Enthusiast 1996 Mustang GT 11.2@122.36 Join Date: Aug 2006 Location: North Carolina Posts: 530	i think it looks like both. but the front end looks a lot better. haha. __________________ black 96 gt w/ 00 gt motor, procharger p1sc 11lbs intercooled. comp cams xe274h .500 lift, full bolt ons, full tubular/alum. susp. w/ coil overs. 4 pt. roll cage. more pic and full list of mods in garage. www.rk-collection.com

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

July 17th, 2008, 11:09 PM	#2
JStang14 Enthusiast 1996 Mustang GT Join Date: Oct 2007 Location: Greenwood, IN Posts: 569	i dont remember the tbody but im pretty sure hte shifter you need a 10mm and 13mm socket and an extension to make it easier

July 17th, 2008, 11:10 PM	#3
JStang14 Enthusiast 1996 Mustang GT Join Date: Oct 2007 Location: Greenwood, IN Posts: 569	oh and some silicone to seal it back on

July 18th, 2008, 02:29 AM	#9
SWEET2KSTANG I Post Entirely Way Too Much 2000 mustang gt 11.79@115.83 Join Date: Oct 2006 Location: N.W. AR Posts: 5,026	that front end just ruined a decent car. __________________ stock long block, bolt ons, slicks, and a little squeeze N/A-12.81@103.7 N2O-11.79@115.8 parting out 04 cobra, pm me for details

July 18th, 2008, 04:45 AM	#10
NavySeabee87 Enthusiast 2004 Mustang Gt Join Date: Mar 2007 Location: Oxnard Ca.-back from deployment! Posts: 914	you cant mix chevy and ford, wtf dude.....wtf __________________ Flowmaster Catback, Bassani O/R X, Steeda RAI, Lightbar, Bullet Wheels, Plenum/T body, Adj. Shocks/struts, Springs, MM CC Plates Grill delete, MILITARY CREW E4

July 18th, 2008, 06:49 PM	#11
mikeGTmurr46 Regular 2000 Mustang GT 13.7@101 Join Date: Nov 2007 Location: South Jersey Posts: 156	this is a chevy gone right though Ron DeRaad's '68 Chevy Rs Camaro - Popular Hot Rodding Magazine __________________ Studies show that 92% of kids listen to rap. If you are one of the 8% who still listens to real music put this in your signature.

Threads Similar to: Tools Required to Install Plenum/TB and Shifter
Thread	Thread Starter	Forum	Replies	Last Post
Need a little shifter install assistance	07GT-CS	2005+	13	February 5th, 2008 02:50 PM
shifter install need help	20gtvert03	99-04	8	November 8th, 2007 02:13 AM
shifter install need help	20gtvert03	99-04	1	November 7th, 2007 08:34 PM
List of "unique" tools for Header install:Swivel S	Smoothgrandmama	99-04	14	October 19th, 2007 07:32 PM
T/B And Plenum Install	TyCouey2000GT	99-04	37	October 16th, 2007 11:38 AM

All times are GMT -4. The time now is 02:31 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.