front sway bar removal

00gtCoolGuy · July 18th, 2008, 11:14 PM

how to? anyone?

is it dangerous or unwise to leave it off for everyday driving?

sxynerd · July 18th, 2008, 11:17 PM

Remove the end links unbolt the two U brackets with the bushings and finagle it down. You'll see once you lift the car how it needs to come out. 1hr job at the most.

If you have lowering spring it's not so bad as long as you're not trying to take sharp turns at 60mph. Stock springs it's slightly more squirrely.

futureMACH1racer · July 18th, 2008, 11:27 PM

I say if you go to the strip alot then go for it, but if you just drive the car than leave it on there.

sxynerd · July 18th, 2008, 11:36 PM

"IF" you had adjustables in the front, you'd never notice it was gone unless you open track.

00gtCoolGuy · July 19th, 2008, 12:39 AM

Originally Posted by futureMACH1racer

I say if you go to the strip alot then go for it, but if you just drive the car than leave it on there.

take the car to the track about twice a month...don't care to much for great handling or cornering, its my DD, but i take it easy on the streets and save my fun for the track

casper gt · July 19th, 2008, 01:12 AM

I've had mine off for quite some time with no problems. as long as you drive sanely I say take it off & toss it.

SWEET2KSTANG · July 19th, 2008, 01:27 AM

i run with mine off a lot. i take it out on twisties hard, DD, and race without it. a little more body roll hitting the turns hard, but not too awfully bad.

travis_afx · July 19th, 2008, 01:30 AM

I took mine off and its my dd. I haven't had any problems, just a little more body roll.

sxynerd · July 19th, 2008, 02:22 AM

I just thought of one more thing. The "squish" turning into driveways can get annoying if you have over sized wheels and tires.

Drgnracin72 · July 19th, 2008, 02:42 AM

wanna sell me your sway bar and end links and stuff? i took mine off a long time ago, and would like to get mine back to handling well instead of pure drag racing. anyways, you will notice more body roll, but its not unsafe.

99mustanggtman · July 19th, 2008, 03:13 AM

I've had mine off for like a month and half because i was hitting the strip, i'm too lazy now to install it, but you will notice incread body roll, i def did.

Drgnracin72 · July 19th, 2008, 03:14 AM

Originally Posted by 99mustanggtman

I've had mine off for like a month and half because i was hitting the strip, i'm too lazy now to install it, but you will notice incread body roll, i def did.

wanna sell me yours?

MustangMatt96GT · July 19th, 2008, 03:16 AM

steve, i have my acutal bar, but i dont have the end links as one was broken. let me know if you want it

Drgnracin72 · July 19th, 2008, 03:29 AM

i think i actually have a bar but i know i dont have the end links, and those are really what i need. i have yet to find someone who will sell just the links so ill buy the whole thing if i need too.

00gtCoolGuy · July 19th, 2008, 03:55 AM

i'll get back to you soon drgn...i'll probably take it off this weekend

iowanine · July 19th, 2008, 04:50 PM

I'd say go for it, I'll even help you if you want.

KhaosGT · July 19th, 2008, 04:57 PM

i have had mine off for months and my car rides fine

99mustanggtman · July 19th, 2008, 05:05 PM

Originally Posted by drgnracin72

wanna sell me yours?

haha sorry i plan on puttin it on sometime this year lol

July 18th, 2008, 11:14 PM	#1
00gtCoolGuy Enthusiast 2000 Mustang GT 14.211 @ 93.0...4800-5000 FT D.A. Join Date: Oct 2007 Location: El Paso, TX Posts: 583	front sway bar removal how to? anyone? is it dangerous or unwise to leave it off for everyday driving? __________________ 2000 Mustang GT 4.10's, Hoosier DR's (stock intake, stock exhaust)...nitrous kit awaiting install

July 18th, 2008, 11:17 PM	#2
sxynerd Regular Join Date: Oct 2006 Location: In Reality, why where do you live? Posts: 221	Remove the end links unbolt the two U brackets with the bushings and finagle it down. You'll see once you lift the car how it needs to come out. 1hr job at the most. If you have lowering spring it's not so bad as long as you're not trying to take sharp turns at 60mph. Stock springs it's slightly more squirrely. __________________ Fast, Reliable & Cheap... ...Pick two Last edited by sxynerd : July 18th, 2008 at 11:19 PM.

July 18th, 2008, 11:27 PM	#3
futureMACH1racer July 08 ROTM/MM's Most Eligible Bachelor 2004 Mach 1 Too Slow Join Date: Sep 2007 Location: Giving Zip an Amish Butter Churn Posts: 3,385	I say if you go to the strip alot then go for it, but if you just drive the car than leave it on there. __________________ SNEAKER CREW MEMBER #3 Public Service Announcement: White_Fang has no clue what he is talking about. Please DO NOT take information from this guy.

July 18th, 2008, 11:36 PM	#4
sxynerd Regular Join Date: Oct 2006 Location: In Reality, why where do you live? Posts: 221	"IF" you had adjustables in the front, you'd never notice it was gone unless you open track. __________________ Fast, Reliable & Cheap... ...Pick two

July 19th, 2008, 01:27 AM	#7
SWEET2KSTANG I Post Entirely Way Too Much 2000 mustang gt 11.79@115.83 Join Date: Oct 2006 Location: N.W. AR Posts: 5,026	i run with mine off a lot. i take it out on twisties hard, DD, and race without it. a little more body roll hitting the turns hard, but not too awfully bad. __________________ stock long block, bolt ons, slicks, and a little squeeze N/A-12.81@103.7 N2O-11.79@115.8 parting out 04 cobra, pm me for details

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

July 19th, 2008, 01:12 AM	#6
casper gt Regular 2000 mustang gt auto 13.75@100 Join Date: Mar 2008 Location: cheswick pa Posts: 272	I've had mine off for quite some time with no problems. as long as you drive sanely I say take it off & toss it.

July 19th, 2008, 01:30 AM	#8
travis_afx Moderator '02 GT Join Date: May 2007 Location: OK Posts: 1,165	I took mine off and its my dd. I haven't had any problems, just a little more body roll. __________________ BBK CAI, 75mm BBK TB, Trick Flow plenum, U/DP, spec clutch, short throw shifter, adj. upper cntrl arms, lower cntrl arms, 50/50 shocks, MAC exhaust, 4.10s, SCT flip switch

July 19th, 2008, 02:22 AM	#9
sxynerd Regular Join Date: Oct 2006 Location: In Reality, why where do you live? Posts: 221	I just thought of one more thing. The "squish" turning into driveways can get annoying if you have over sized wheels and tires. __________________ Fast, Reliable & Cheap... ...Pick two

July 19th, 2008, 02:42 AM	#10
Drgnracin72 Slayer of Douchebags mustangless Join Date: Jan 2006 Location: PURCELL, OKLAHOMA Posts: 9,355	wanna sell me your sway bar and end links and stuff? i took mine off a long time ago, and would like to get mine back to handling well instead of pure drag racing. anyways, you will notice more body roll, but its not unsafe. __________________ NUKE THE UNBORN GAY BABY WHALES FOR JESUS

July 19th, 2008, 03:13 AM	#11
99mustanggtman Hardcore Enthusiast 1999 GT Join Date: Feb 2007 Location: Germantown MD Posts: 1,151	I've had mine off for like a month and half because i was hitting the strip, i'm too lazy now to install it, but you will notice incread body roll, i def did. __________________ Vortech V2 SQ @ 11LBS -Ray Wrong: Their is no one here. Wrong: Shelley wants to know if there busy. Wrong: The dogs are happily chewing on they're bones. RIGHT: I can't believe they're leaving their children there alone!

July 19th, 2008, 03:16 AM	#13
MustangMatt96GT All Throttle with a Bottle 1996 Mustang GT 12.91@105.29 @ 5800 FT Join Date: Dec 2006 Location: Lakewood, CO Posts: 7,529	steve, i have my acutal bar, but i dont have the end links as one was broken. let me know if you want it __________________ We expect shit to break, look foward to realizing exactly when it is happening, and than obsess about dropping plenty of cash to rebuild stronger, so we can try to run it hard as hell and break again. We are sick individuals.

July 19th, 2008, 03:29 AM	#14
Drgnracin72 Slayer of Douchebags mustangless Join Date: Jan 2006 Location: PURCELL, OKLAHOMA Posts: 9,355	i think i actually have a bar but i know i dont have the end links, and those are really what i need. i have yet to find someone who will sell just the links so ill buy the whole thing if i need too. __________________ NUKE THE UNBORN GAY BABY WHALES FOR JESUS

July 19th, 2008, 03:55 AM	#15
00gtCoolGuy Enthusiast 2000 Mustang GT 14.211 @ 93.0...4800-5000 FT D.A. Join Date: Oct 2007 Location: El Paso, TX Posts: 583	i'll get back to you soon drgn...i'll probably take it off this weekend __________________ 2000 Mustang GT 4.10's, Hoosier DR's (stock intake, stock exhaust)...nitrous kit awaiting install

July 19th, 2008, 04:50 PM	#16
iowanine Newbie 2002 Mustang GT Join Date: Jul 2008 Location: El Paso,TX Posts: 45	I'd say go for it, I'll even help you if you want.

Threads Similar to: front sway bar removal
Thread	Thread Starter	Forum	Replies	Last Post
Front sway bar	zinc02GT	The Clubhouse	3	June 11th, 2008 01:53 PM
front sway bar	wadepetersen	V6 Mustangs	3	June 14th, 2007 02:55 AM
Front sway bar	yellowgt5	5.0 Mustangs	3	April 29th, 2007 12:06 PM
front sway bar	doorvip	5.0 Mustangs	4	December 11th, 2006 10:20 PM
Front Sway Bar	bcp5008	V6 Mustangs	9	October 2nd, 2006 07:19 PM

All times are GMT -4. The time now is 03:50 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.

July 19th, 2008, 04:57 PM	#17
KhaosGT Enthusiast 2004 Mustang GT Join Date: Jan 2007 Location: Fort Worth, TX Posts: 819	i have had mine off for months and my car rides fine __________________ 2004 Black Mustang Gt "I'm a agent of chaos" -Joker,Dark Knight