throttle body

bullitt5576 · September 7th, 2008, 11:13 PM

i took mine off and cleaned it today, definately feels more alive, but whenever i come to a stop it hangs around 1400 rpm for a few seconds before dropping down to normal idle, and this is at a complete stop, not rolling up to a stop

any ideas or is it normal?

WNTS 2RN · September 7th, 2008, 11:20 PM

You might have washed away the grease that lubes the butterfly.

bullitt5576 · September 7th, 2008, 11:20 PM

i bet i did cause i cleaned the shit out of that bastard

97mustanggt · September 8th, 2008, 03:13 AM

so wat happens now..wat happens if u do wash the grease off..

99mustanggtman · September 8th, 2008, 09:32 AM

Clean the IAC.

bullitt5576 · September 8th, 2008, 03:53 PM

Originally Posted by 99mustanggtman

Clean the IAC.

cleaned that same time that i cleaned the tb

99mustanggtman · September 8th, 2008, 04:16 PM

Did you maybe accidentally reposition the TPS

bullitt5576 · September 8th, 2008, 04:47 PM

not sure, i didnt remove it, but it goes down to its normal idle after a second or so of sitting at a high idle

00vabchgt · September 8th, 2008, 05:21 PM

so it's just hanging at 1400 or so, then it drops down? that actually sounds pretty normal for our cars...

thorpedo26 · September 8th, 2008, 07:56 PM

Originally Posted by 00vabchgt

so it's just hanging at 1400 or so, then it drops down? that actually sounds pretty normal for our cars...

x2. i think im gunna go clean mine for shits and giggles

cliffyk · September 8th, 2008, 08:18 PM

I just posted this, it may help you reset the idle stop...

2000ZincGT · September 9th, 2008, 01:48 AM

reset you computer, it may have been very dirty and when you cleaned it, it could have just flowed a little different. also have you looked into the IAC Mod? mine hangs at 1000 for a sec or two then goes down to idle.

September 7th, 2008, 11:13 PM	#1
bullitt5576 Regular 2001 Bullitt Join Date: May 2008 Location: Oklahoma City Posts: 415 iTrader: 0 reviews	throttle body i took mine off and cleaned it today, definately feels more alive, but whenever i come to a stop it hangs around 1400 rpm for a few seconds before dropping down to normal idle, and this is at a complete stop, not rolling up to a stop any ideas or is it normal? __________________ MM NEW EDGE COBRA CREW #2

September 7th, 2008, 11:20 PM	#2
WNTS 2RN Hardcore Enthusiast 2011 Mustang GT Join Date: May 2007 Location: US Navy Goat Locker Posts: 1,545 iTrader: 0 reviews	You might have washed away the grease that lubes the butterfly. __________________ 2011 5.0 1.3 gallons of American performance!! K&N drop in (I know, I'm cheap) Flowmaster American Thunder exhaust H&R Super Sport springs Bremmer BR01 19x8, 19x9.5 wheels Bottomless bottle of soap!

September 7th, 2008, 11:20 PM	#3
bullitt5576 Regular 2001 Bullitt Join Date: May 2008 Location: Oklahoma City Posts: 415 iTrader: 0 reviews	i bet i did cause i cleaned the shit out of that bastard __________________ MM NEW EDGE COBRA CREW #2

September 8th, 2008, 09:32 AM	#5
99mustanggtman Hardcore Enthusiast 1999 GT Join Date: Feb 2007 Location: Germantown, MD/ OSU Posts: 1,835 iTrader: 7 reviews	Clean the IAC. __________________ Single 67mm turbo, ported pi heads, edelbrock vic jr. manifold w/HPP plenum, terminator shortblock, return fuel system... Goal 600+ rwhp.

September 8th, 2008, 04:16 PM	#7
99mustanggtman Hardcore Enthusiast 1999 GT Join Date: Feb 2007 Location: Germantown, MD/ OSU Posts: 1,835 iTrader: 7 reviews	Did you maybe accidentally reposition the TPS __________________ Single 67mm turbo, ported pi heads, edelbrock vic jr. manifold w/HPP plenum, terminator shortblock, return fuel system... Goal 600+ rwhp.

September 8th, 2008, 03:13 AM	#4
97mustanggt Hardcore Enthusiast 97GT & 97Snake & 00L T.B.A Join Date: Aug 2008 Location: Richgrove, Ca Posts: 2,196 iTrader: 0 reviews	so wat happens now..wat happens if u do wash the grease off..

September 8th, 2008, 04:47 PM	#8
bullitt5576 Regular 2001 Bullitt Join Date: May 2008 Location: Oklahoma City Posts: 415 iTrader: 0 reviews	not sure, i didnt remove it, but it goes down to its normal idle after a second or so of sitting at a high idle __________________ MM NEW EDGE COBRA CREW #2

September 8th, 2008, 08:18 PM	#11
cliffyk Hardcore Enthusiast Join Date: Feb 2007 Location: Saint Augustine, FL Posts: 1,362 iTrader: 0 reviews	I just posted this, it may help you reset the idle stop... __________________ -cliff knight- My Mustang 2003 GT, UPR X, FRPP 24lb/h injectors, Magnaflow, 180° stat, PP 70mm TB & plenum, Delta Force Commando, Steeda UDPs, Ralco RZ_flywheel, RAM HDX clutch 3.73s, 262 rwHP/305 ft.lb. Flex-fuel: burns gas and rubber...

September 9th, 2008, 01:48 AM	#12
2000ZincGT Regular Mustang GT Join Date: Apr 2008 Location: MI Posts: 290 iTrader: 0 reviews	reset you computer, it may have been very dirty and when you cleaned it, it could have just flowed a little different. also have you looked into the IAC Mod? mine hangs at 1000 for a sec or two then goes down to idle.

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

LinkBacks (?) LinkBack to this Thread: http://www.moddedmustangs.com/forums/99-04/88048-throttle-body.html
Posted By	For	Type	Date
throttle body	This thread	Refback	September 7th, 2008 11:34 PM

Threads Similar to: throttle body
Thread	Thread Starter	Forum	Replies	Last Post
throttle body	dave364634	2005 - 2010	9	September 7th, 2008 10:56 PM
4V Throttle Body	weems	99-04	22	December 24th, 2007 11:54 AM
Throttle body	Tony_90fox	5.0 Mustangs	5	May 4th, 2007 12:33 PM
70 MM Throttle Body	jerb43	General Tech	2	December 1st, 2006 07:31 PM
Throttle Body	mjkids	99-04	4	November 2nd, 2006 08:39 PM

All times are GMT -4. The time now is 08:13 PM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.