Lowered The Monster Truck Gt!

svtkidd23 · October 6th, 2008, 11:41 PM

okayy here is the before.!!!

after.. didnt even sit in it yet.. or drive..(yesterday picturre)

i been drvin all day.. and they lowered alot.. like half inch more.. i measured the drop... 2 1/8th in front 1 7/8 in back..

it looks mean.
il post the pics tommorw

AndrewA. · October 6th, 2008, 11:43 PM

Dammmn did that thing have a lift kit before!! Looks good..i cant wait to get my springs on..i didnt see but did you do that yourself?

96GTRagTop · October 6th, 2008, 11:46 PM

no offence but did u have a lift kit on that thing or something?

svtkidd23 · October 6th, 2008, 11:47 PM

yeah.. i did them.. it was so easy..
lower control arm with jack after undoing 3 bolts.. bloom spring comes out put new in..
rear ones.. take out one bolt.. lower it with jack.. put new in.. boom jack up done.. takes good 2 hours.. cause time... and bolts could be rusty,
them pics do no justice.. i cant take a pic now cause its dark but its ALOT LOWER from the pic above me

svtkidd23 · October 6th, 2008, 11:47 PM

Originally Posted by 96GTRagTop

no offence but did u have a lift kit on that thing or something?

no i thinks it the angle i took the picturre.. but she was high!

4x4 option

BLK2KGT · October 6th, 2008, 11:52 PM

Lookin clean it should settle down alot more. I have had the prokit on mine for a while. You should be very happy w/in the month.

svtkidd23 · October 6th, 2008, 11:59 PM

Originally Posted by BLK2KGT

Lookin clean it should settle down alot more. I have had the prokit on mine for a while. You should be very happy w/in the month.

i was drivin down a bumpy ass road just now... and we measured her before and after and it dropped like half an inch in back and 1/4 in front..

i think they might be sportlines though.. cause eibach makes CJ PONY PARTS springs... but i put in the code on the spring ont the site and sportlines came up?? soo.?
i dunno... spring box was white cj pony...prokit..

i dunno maybe the new isolaters being made thinner.. i dunno sits lower than my best friedns 03 gt with prokit?

funny thing is i dont need a allignment and cast an camber is perfect..

i think the proior owner had same springs cause its to perfect..
and before it neeeded a allignment... with stockers..

cast and camber were already on car.. when bought, but stock springs i dunno???

BLK2KGT · October 7th, 2008, 12:11 AM

Normally w/ just a prokit you won't need c/c plates, maybe an alignment but thats it. Your guess is as good as mine on the pn thing. The previous owner may have just bought the plates for dress up or somthin.

svtkidd23 · October 7th, 2008, 12:14 AM

good point!
i dunno.. but she is perfect mr tire aggrreed.. they think theyre was sportlines or prokit on prior... cause u can tell its alligneed jsut for it. and so it cast an cmaber.!

tommorow more pics around 4-5.30...checkem!!

svtkidd23 · October 7th, 2008, 08:47 PM

here is some.. new ones..

little brother made it while i was sleepin

svtkidd23 · October 7th, 2008, 08:53 PM

looks good!

thepizzle44 · October 7th, 2008, 09:00 PM

looks good dude...cant wait to put my springs on after the winter

svtkidd23 · October 7th, 2008, 09:00 PM

after the winter.. Come on!! do it now

thepizzle44 · October 7th, 2008, 09:05 PM

haha i got the springs in my garage all ready to go but i want to wait and do the shocks, struts and springs all at once and come out with somethin nice after its out of storage lol

svtkidd23 · October 7th, 2008, 09:06 PM

hahah good call

energiesource · October 7th, 2008, 09:17 PM

that was a shitty ride height stock dude
here are my current shit rims/tires on the car until i get new ones next year but they're the same profile as yours and my car isnt even lowered
well, compared to yours it is

svtkidd23 · October 7th, 2008, 09:18 PM

yeah my stock height was shitty as hell

00gtCoolGuy · October 8th, 2008, 12:54 AM

Originally Posted by svtkidd23

yeah my stock height was shitty as hell

yeah...that looks really really high...

anyway, looks good now...that's for sure

commandersafi · October 8th, 2008, 01:43 AM

so about the pics of the girl in your avi?

jivepepper · October 8th, 2008, 06:06 AM

Mines is only slightly lower than stock. I removed the spring isolaters in the back and have coilovers in the front.

October 6th, 2008, 11:43 PM	#22
AndrewA. Hardcore Enthusiast 2001 Mustang GT 8.9@78 Join Date: Jul 2007 Location: DFW Texas Posts: 1,258	Dammmn did that thing have a lift kit before!! Looks good..i cant wait to get my springs on..i didnt see but did you do that yourself? __________________ Fire it up, burn it down.

October 6th, 2008, 11:46 PM	#23
96GTRagTop Master of the Force Millenium Falcon "Just Living the Dream" Join Date: Mar 2007 Location: Zip's Bubble Posts: 7,603	no offence but did u have a lift kit on that thing or something? __________________ MSO smokes pole

October 6th, 2008, 11:52 PM	#26
BLK2KGT Enthusiast 2000 Mustang GT 1/8 7.95@82.43 Join Date: May 2008 Location: Mobile, Alabama Posts: 654	Lookin clean it should settle down alot more. I have had the prokit on mine for a while. You should be very happy w/in the month. __________________ If you're not 1st you're last -Ricky Bobby Topless Mustang Club Founder

October 7th, 2008, 12:11 AM	#28
BLK2KGT Enthusiast 2000 Mustang GT 1/8 7.95@82.43 Join Date: May 2008 Location: Mobile, Alabama Posts: 654	Normally w/ just a prokit you won't need c/c plates, maybe an alignment but thats it. Your guess is as good as mine on the pn thing. The previous owner may have just bought the plates for dress up or somthin. __________________ If you're not 1st you're last -Ricky Bobby Topless Mustang Club Founder

October 7th, 2008, 09:00 PM	#32
thepizzle44 Regular 2003 Mustang GT Con. Join Date: May 2008 Location: RI Posts: 149	looks good dude...cant wait to put my springs on after the winter __________________ SLOW!! Magnaflow Cat Back, BBK Shorty Headers, BBK UD Pulleys, JLT CAI, MSD Coil Packs, Bullitt Deep Dish Soon to Have 4:10 Gears, Eibach Springs, Tokico D Specs, MGW Shifter, Mac Prochamber, Mac Ceramic Coated Long Tubes, Zex Wet Kit

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

October 7th, 2008, 09:05 PM	#34
thepizzle44 Regular 2003 Mustang GT Con. Join Date: May 2008 Location: RI Posts: 149	haha i got the springs in my garage all ready to go but i want to wait and do the shocks, struts and springs all at once and come out with somethin nice after its out of storage lol __________________ SLOW!! Magnaflow Cat Back, BBK Shorty Headers, BBK UD Pulleys, JLT CAI, MSD Coil Packs, Bullitt Deep Dish Soon to Have 4:10 Gears, Eibach Springs, Tokico D Specs, MGW Shifter, Mac Prochamber, Mac Ceramic Coated Long Tubes, Zex Wet Kit

October 7th, 2008, 09:17 PM	#36
energiesource Hardcore Enthusiast Join Date: Oct 2006 Location: Up der in canada eh Posts: 2,672	that was a shitty ride height stock dude here are my current shit rims/tires on the car until i get new ones next year but they're the same profile as yours and my car isnt even lowered well, compared to yours it is __________________ 2000 Mustang GT, Steeda Triax shifter, Underdrive pulleys, SLP LM2, MAC L/T and O/R H-pipe. Transmission fix, new clutch Coming soon: Brakes.

October 8th, 2008, 01:43 AM	#39
commandersafi Banned 2000 v6 Mustang Join Date: Apr 2008 Location: Houston, TX Posts: 340	so about the pics of the girl in your avi?

October 8th, 2008, 06:06 AM	#40
jivepepper Hardcore Enthusiast Join Date: Mar 2006 Location: Under a sombrero Posts: 1,764	Mines is only slightly lower than stock. I removed the spring isolaters in the back and have coilovers in the front. __________________ Spending money I don't have, on parts I don't need. to impress people I don't know.... 2k MUSTANG GT 598/531 RWHP/RWTQ Just a little S-trim....

Threads Similar to: Lowered The Monster Truck Gt!
Thread	Thread Starter	Forum	Replies	Last Post
Kenne Bell Monster!	AzSonicSnake	Videos	12	August 30th, 2008 07:02 PM
Brembo 8pot BBK... MONSTER	Jonathan@DRI	D'Agostino Racing Inc.	0	August 15th, 2008 11:36 AM
The MOnster SHO	klouierocks	The Clubhouse	6	June 22nd, 2008 11:49 PM
NEED HELP PLANNING 86 5.8 MONSTER	GeNos86GT	5.0 Mustangs	23	November 3rd, 2007 10:23 AM
NEED HELP PLANNING 86 5.8 MONSTER	GeNos86GT	5.0 Mustangs	2	November 1st, 2007 04:33 PM

All times are GMT -4. The time now is 01:03 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.