aftermarket intakes

KevinJ99GT · October 12th, 2008, 01:12 AM

does the professional products plenum and throttle body stick up any higher than the stock one. Hope not because my hood already just bearly misses it.

Doc8224 · October 12th, 2008, 01:37 AM

No. it is just about the same, just looks different.

Drgnracin72 · October 12th, 2008, 01:47 AM

+1

KevinJ99GT · October 12th, 2008, 02:02 AM

okay thanks.

cliffyk · October 12th, 2008, 11:16 AM

The OEM upper plenum is 3-1/4" tall, all aftermarket plenums are taller by 3/4" or so, the PP is 4" tall. This is part of their "magic", being taller allows for a larger and more graceful, and thus less restrictive 90° elbow.

The good new is that if you have the OEM hood it will fit fine and still clear the matt by 3/4" or more--things are not really as close under there as you think.

KevinJ99GT · October 12th, 2008, 01:05 PM

mines not oem

energiesource · October 12th, 2008, 01:41 PM

thats a pretty cheap plenem and tb combo they have on 50resto

Adde · October 12th, 2008, 04:29 PM

buy mine

http://www.moddedmustangs.com/forums...em-intake.html

cliffyk · October 12th, 2008, 04:48 PM

Originally Posted by KevinJ99GT

mines not oem

And how exactly would one know that, which one do you have?

KevinJ99GT · October 12th, 2008, 05:22 PM

spider x-9

KevinJ99GT · October 12th, 2008, 05:22 PM

whats the cheapest place for the combo

October 12th, 2008, 01:12 AM	#1
KevinJ99GT Enthusiast 1999 Mustang GT 8.30 1/8th mile Join Date: Jun 2008 Location: Walnut Ridge, Arkansas Posts: 866 iTrader: 0 reviews	aftermarket intakes does the professional products plenum and throttle body stick up any higher than the stock one. Hope not because my hood already just bearly misses it. __________________ - full bolt on's, hitech stage 2's, zex 100 shot

October 12th, 2008, 01:37 AM	#2
Doc8224 N/A 4v Guru 2003 Mach 1 Join Date: Oct 2007 Location: Afghanistan Posts: 3,463 Blog Entries: 2 iTrader: 1 reviews	No. it is just about the same, just looks different. __________________ Military Crew U.S. Army Aviation Apache's Lead The Way

October 12th, 2008, 01:47 AM	#3
Drgnracin72 I Post Entirely Way Too Much Join Date: Jan 2006 Location: somewhere in oklahoma Posts: 10,635 iTrader: 2 reviews	+1 __________________ RIP ΜΟΛΩΝ ΛΑΒΕ Political Correctness is a doctrine, fostered by a delusional, illogical, liberal minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a turd by the clean end. One Big Ass Mistake America SHEEPDOGS

October 12th, 2008, 02:02 AM	#4
KevinJ99GT Enthusiast 1999 Mustang GT 8.30 1/8th mile Join Date: Jun 2008 Location: Walnut Ridge, Arkansas Posts: 866 iTrader: 0 reviews	okay thanks. __________________ - full bolt on's, hitech stage 2's, zex 100 shot

October 12th, 2008, 11:16 AM	#5
cliffyk Hardcore Enthusiast Join Date: Feb 2007 Location: Saint Augustine, FL Posts: 1,808 iTrader: 1 reviews	The OEM upper plenum is 3-1/4" tall, all aftermarket plenums are taller by 3/4" or so, the PP is 4" tall. This is part of their "magic", being taller allows for a larger and more graceful, and thus less restrictive 90° elbow. The good new is that if you have the OEM hood it will fit fine and still clear the matt by 3/4" or more--things are not really as close under there as you think. __________________ -cliff knight- My Mustang 2003 GT, UPR X, 24lb/h injectors, Magnaflow, 180° stat, PP 70mm TB & plenum, DF Commando, Steeda UDPs, Ralco RZ_flywheel, RAM HDX clutch, WX EFX COPs 3.73s, 262 rwHP/305 lb-ft. Flex-fuel: burns gas and rubber...

October 12th, 2008, 01:05 PM	#6
KevinJ99GT Enthusiast 1999 Mustang GT 8.30 1/8th mile Join Date: Jun 2008 Location: Walnut Ridge, Arkansas Posts: 866 iTrader: 0 reviews	mines not oem __________________ - full bolt on's, hitech stage 2's, zex 100 shot

October 12th, 2008, 01:41 PM	#7
energiesource MM Fanatic Join Date: Oct 2006 Location: Up der in canada eh Posts: 3,527 iTrader: 1 reviews	thats a pretty cheap plenem and tb combo they have on 50resto __________________ 2000 Mustang GT, 417hp/421tq, P1SC @ 6 psi(?), Custom grind cams, Steeda Triax shifter, SLP LM2, MAC L/T and O/R H-pipe. 18x9/10 Flat Black FR500's, Mach C-pillars, bullitt side scoops/skirts.

October 12th, 2008, 04:29 PM	#8
Adde Regular Join Date: Mar 2008 Posts: 51 iTrader: 0 reviews	buy mine http://www.moddedmustangs.com/forums...em-intake.html __________________ KB2.1L 380hp/420tq SLP X-pipe, MAC Cat back, 3.73 Gears, Short Throw shifter Looks: Mach 1 Chin spoiler, Grill Delete Kit, Black Bullit Wheels, Eibach springs For Sale: K&N Cold Air Intake, 70MM PP Plenum Intake Manifold w/ fuel rails

October 12th, 2008, 05:22 PM	#10
KevinJ99GT Enthusiast 1999 Mustang GT 8.30 1/8th mile Join Date: Jun 2008 Location: Walnut Ridge, Arkansas Posts: 866 iTrader: 0 reviews	spider x-9 __________________ - full bolt on's, hitech stage 2's, zex 100 shot

October 12th, 2008, 05:22 PM	#11
KevinJ99GT Enthusiast 1999 Mustang GT 8.30 1/8th mile Join Date: Jun 2008 Location: Walnut Ridge, Arkansas Posts: 866 iTrader: 0 reviews	whats the cheapest place for the combo __________________ - full bolt on's, hitech stage 2's, zex 100 shot

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: aftermarket intakes
Thread	Thread Starter	Forum	Replies	Last Post
Intakes	scxc15	Modular Mustangs	6	November 30th, 2007 04:19 PM
intakes	mmvi	V6 Mustangs	3	September 23rd, 2007 12:15 PM
Intakes	boss302_gt	94-95	18	April 18th, 2007 09:06 PM
Intakes?	86gt5liter	5.0 Mustangs	22	February 28th, 2007 08:10 PM
Intakes	bittydrew	99-04	2	January 1st, 2007 06:00 PM

All times are GMT -4. The time now is 08:03 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.