need a muffler for my f150

Dennis · September 26th, 2010, 12:41 PM

im on a f150 forum but i know i can get better answers here lol. so apparently someone did a hell of a hack job on the exhaust on my truck before i owned it. this caused the pipes to rust and break off right at the muffler. of course there is only one hanger holding the muffler up and it goes on the small section of pipe comming off of the muffler that fell off lol.

so now i need a new muffler. i am not running pipes so i dont care about a whole kit. i just want the loudest deepest soundi can get out of 1 muffler. its a 03 with the 5.4 in it.

Destination S197 · September 26th, 2010, 08:35 PM

Borla XR-1 model # 40943

Before I got rid of my truck, I was looking at purchasing one of them.
Borla 40943 - Borla XR-1 Racing Mufflers - Overview - SummitRacing.com

YouTube - Broadcast Yourself.

Dennis · September 27th, 2010, 01:25 PM

that does sound nice hmm

Destination S197 · September 27th, 2010, 02:31 PM

Originally Posted by Dennis

that does sound nice hmm

If that doesn't suit your fancy, try an Aero Turbine 30/30. They're hard to find in stock though.

YouTube - Broadcast Yourself.

jdos1 · October 10th, 2010, 11:06 PM

Borla XR-1

I run a Borla ProXS turbo muffler on my Titan, it's not very loud though, we'll see what happen's when LT's go on and cats come off.

gary68 · November 6th, 2010, 08:58 PM

yup

Mustang2 · November 6th, 2010, 09:02 PM

Holley Performance Purple Hornies, I put a set of these on my 66 Rambler American with a set of longtube headers and wow you can get them up to 3inchs.

Mustang2 · November 6th, 2010, 09:05 PM

Holley Performance Purple Hornies Products or you can get them from Summit Racing

Thiggonionlly · November 11th, 2010, 07:36 AM

I purchased my 2000 Ford F150 a little over a month ago and i'm looking to improve upon it's current status. It seems that most F150's have Flowmaster exhaust systems/mufflers and some people take off the cats and muffler. I was thinking about cutting the exhaust up to the catalytic converter and wielding a pipe to make a deeper tone. Any thoughts on what i should do?

Sonic.Blue · November 14th, 2010, 01:17 AM

i'd get the borla

October 10th, 2010, 11:06 PM	#5
jdos1 Hardcore Enthusiast 11 Mustang GT 12.86@109 on 275/40r17 radials hitting 5th gear on the top end. Join Date: Jan 2010 Location: Greenville/Spartanburg/Lancaster, SC Posts: 1,780 iTrader: 3 reviews	Borla XR-1 I run a Borla ProXS turbo muffler on my Titan, it's not very loud though, we'll see what happen's when LT's go on and cats come off. __________________ Camber Bolts $20 ship OBO! 2011 5.0, 2nd MT82, 3.73's, Amsoil SS 10w-30 & MTG, GT500 A/B, Barton Bracket, BBR Billet LCAs, JLT Separator, FRPP Strut Tower Brace, BMR Springs/Adj Panhard Rod/LCA relos, Koni Sport Shocks/Struts, GT500 USM's

November 6th, 2010, 09:02 PM	#7
Mustang2 Regular 1988 Mustang Gt Join Date: Oct 2010 Location: Altoona, PA Posts: 58 iTrader: 0 reviews	Holley Performance Purple Hornies, I put a set of these on my 66 Rambler American with a set of longtube headers and wow you can get them up to 3inchs. __________________ 1988 Foxbody GT E-303 cam BBK Shorty Headers,BBK X-Pipe BBK Fenderwall Cold Air Intake Edelbrock Duel Timing Chain Pro 5.0 Short Shifter Mach 1 Fiberglass Hood Subframe Connectors NO Heater core, NO A/C

November 6th, 2010, 09:05 PM	#8
Mustang2 Regular 1988 Mustang Gt Join Date: Oct 2010 Location: Altoona, PA Posts: 58 iTrader: 0 reviews	Holley Performance Purple Hornies Products or you can get them from Summit Racing __________________ 1988 Foxbody GT E-303 cam BBK Shorty Headers,BBK X-Pipe BBK Fenderwall Cold Air Intake Edelbrock Duel Timing Chain Pro 5.0 Short Shifter Mach 1 Fiberglass Hood Subframe Connectors NO Heater core, NO A/C

November 11th, 2010, 07:36 AM	#9
Thiggonionlly Look Ma! My First Post! Join Date: Nov 2010 Posts: 1 iTrader: 0 reviews	I purchased my 2000 Ford F150 a little over a month ago and i'm looking to improve upon it's current status. It seems that most F150's have Flowmaster exhaust systems/mufflers and some people take off the cats and muffler. I was thinking about cutting the exhaust up to the catalytic converter and wielding a pipe to make a deeper tone. Any thoughts on what i should do? __________________ illumibrite

Threads Similar to: need a muffler for my f150
Thread	Thread Starter	Forum	Replies	Last Post
97-04 F150	mcqueen	All Other Vehicles	5	June 5th, 2010 02:42 PM
4.6l in an f150	mxnate116	The Clubhouse	14	January 29th, 2010 04:09 PM
Anyone have a 97-03 F150???	1FastFox	The Clubhouse	0	June 27th, 2008 03:44 PM
V6 is Gone Got A F150 and a 91 GT 5.0	CAVSOLDIER	5.0 Mustangs	0	March 7th, 2008 08:42 PM
f150	HMUSN	All Other Vehicles	1	August 6th, 2007 10:56 PM

November 6th, 2010, 08:58 PM	#6
gary68 Newbie Join Date: Nov 2010 Posts: 5 iTrader: 0 reviews	yup

November 14th, 2010, 01:17 AM	#10
Sonic.Blue Regular 2005 Mustang v6 Join Date: Oct 2010 Location: Ohio Posts: 113 iTrader: 0 reviews	i'd get the borla

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

All times are GMT -4. The time now is 09:36 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.