Supercharged eclipse v6

Dejectedangle · June 23rd, 2011, 08:37 PM

I need 5 posts to message

so sorry for this import rice burner... I'm looking to buy a vortech v1 T-trim charger if anyone has well here's my car

Dejectedangle · June 23rd, 2011, 08:43 PM

Here is my built engine I blew the car up on stock internals wooho... I did all work

There's the blown piston

New rods

New pistons

Bore 40 over

Dejectedangle · June 23rd, 2011, 08:45 PM

I know lots of ppl use vortech setups for mustangs so I'm looking around here to find a v1 t-trim charger my v5 ain't cuttin it I'm getting only 8 psi on the 2.5 pully

Dejectedangle · June 23rd, 2011, 08:49 PM

A clockwise rotation also!!! Don't matter if it's curved or not

stockfairlady · June 23rd, 2011, 10:36 PM

looks like you have done a lot of work to that eclipse. Nice

blally89 · July 10th, 2011, 05:32 PM

my coworker has one of these cars and i'ts pretty damn quick.. nice work with yours man sorry I dont have the SC your looking for.

Shaun03GT · July 11th, 2011, 12:35 AM

Nice car man. How much power is it making? You need to intercool it

Dejectedangle · September 13th, 2011, 10:24 PM

Got the intercooler all hooked up and found a member to sell me a v1-t trim charger I'm up to 11 psi for now a little over 375 horses

I need a retune and meth is getting hooked up next week

Dejectedangle · September 13th, 2011, 10:27 PM

BML99 · September 14th, 2011, 01:24 AM

How much extra power does that Pepsi-ethanol boost add?

Nice work done

Dejectedangle · September 14th, 2011, 11:22 AM

It's filled with rice lmao

thomasdale2144 · October 1st, 2011, 10:49 AM

Originally Posted by Dejectedangle

It's filled with rice lmao

BAD DEJECTEDANGLE!!! BAD

your cars not rice man haha rice is when a car looks fast but has no balls! your car defiantly has balls! nice ride man

JTs03v6 · October 1st, 2011, 11:11 AM

Nice car man. And that sucks you blew the stock motor, especially for it being a 10' and so new. What happened? I'm assuming it was a tune issue.

What are the specs of the car? Whats it run? btw... what ci did you get out of boring the car 40 over? I bored my 3.8l 30 over and got 239ci or 3.9l.

zinsavage123 · October 1st, 2011, 11:13 AM

whats that thing run in the 1/4?

Dejectedangle · October 11th, 2011, 09:53 PM

Thx for the love guys As for the ci from boring 40 over I think it's like high 3.9 so I just rounded up to a 4.0.... Unfortunately it was not a tune issue it was putting 390 to the wheels on 4 strong pulls at 10 psi on stock motor.... Reason for deatonation on piston 3 was I was running no meth injection or front mout intercooler so you guys know how hot the air gets going through vortechs chargers so that was a cause also the stock compression on this car is 10.5:1 so that was also a factor :/... Lmao I drove the champ home on the blown motor.. Getting internals for this car was hard and EXPENCIVE I had to send ross a good piston for them to make me forged ones and Japan and their fucked up bearing sizes like every stock rod had a different bearing thickness so I had Brian crower send me them H beam rods which took care of that mess so

Currently I've put 20k on the new motor with 11 psi daily driving so it's holding up amazingly but since then I've added meth and the fmic

1/4 mile I can't beat 13 seconds I have a little traction problem one tire fire lol but here are sum runs nothing special I need my computer hol

B's04gt · October 11th, 2011, 09:56 PM

Not bad.. Cool car.

Dejectedangle · October 11th, 2011, 10:08 PM

Got new exhaust put on the car sounds like a v8 at idol I like it Ill have the 1/4 mile runs up in a little

http://i897.photobucket.com/albums/a...dangle/083.mp4

Dejectedangle · October 11th, 2011, 10:13 PM

Where do I get a hot chick moving avatar

supermachone · October 12th, 2011, 01:43 AM

bad ass ride man!

Shaun03GT · October 23rd, 2011, 11:40 PM

update?

June 23rd, 2011, 08:37 PM	#1
Dejectedangle Newbie Join Date: Jun 2011 Posts: 21 iTrader: 0 reviews	Supercharged eclipse v6 I need 5 posts to message so sorry for this import rice burner... I'm looking to buy a vortech v1 T-trim charger if anyone has well here's my car

July 11th, 2011, 12:35 AM	#7
Shaun03GT I Post Entirely Way Too Much 2003 Mustang GT 1/8 - 7.92 @ 91.13mph 1/4 - 12.21 @ 115.84mph Join Date: Sep 2009 Location: Weymouth, MA Posts: 13,450 iTrader: 12 reviews	Nice car man. How much power is it making? You need to intercool it __________________ Vortech V1 Intercooled @ 11psi 394rwhp/392rwtq @ 9.5psi 415rwhp/400rwtq @ 11psi on Methanol Tuned By: Pete @ Performance Dyno Affordable Supercharger Build Guide Supercharger Info for Noobs

September 14th, 2011, 01:24 AM	#10
BML99 MM Gaming Guru 2004 Redfire Deluxe GT 42@42 Join Date: Jan 2010 Location: Mauldin, SC Posts: 5,509 iTrader: 5 reviews	How much extra power does that Pepsi-ethanol boost add? Nice work done __________________ "From a small spark the giant flame is blown" -Dante Alighieri -RIP RLW- "Shitdick, TOB is throw out bearing XOXO" -TitsMcGee aka Graystang

October 1st, 2011, 11:11 AM	#13
JTs03v6 Hardcore Enthusiast 2003 mustang 7.48x1.56=11.67 Join Date: Sep 2009 Location: East Coast Posts: 2,318 iTrader: 0 reviews	Nice car man. And that sucks you blew the stock motor, especially for it being a 10' and so new. What happened? I'm assuming it was a tune issue. What are the specs of the car? Whats it run? btw... what ci did you get out of boring the car 40 over? I bored my 3.8l 30 over and got 239ci or 3.9l. __________________ New combo: Forged SC short Block,280cfm heads, Precision 6262 turbo, cx 31x12x3 fmic http://photobucket.com/JTsTurboBuild http://youtube.com/user/JTsStang

October 1st, 2011, 11:13 AM	#14
zinsavage123 Hardcore Enthusiast 2001 Mustang GT 12.33@111.23mph Join Date: Aug 2008 Location: baltimore, md Posts: 1,422 iTrader: 3 reviews	whats that thing run in the 1/4? __________________ 2001 Mustang GT - mods+pics in garage, tuned by matt@performance evolution 1996 Civic DX - my dd

June 23rd, 2011, 08:43 PM	#2
Dejectedangle Newbie Join Date: Jun 2011 Posts: 21 iTrader: 0 reviews	Here is my built engine I blew the car up on stock internals wooho... I did all work There's the blown piston New rods New pistons Bore 40 over

June 23rd, 2011, 08:45 PM	#3
Dejectedangle Newbie Join Date: Jun 2011 Posts: 21 iTrader: 0 reviews	I know lots of ppl use vortech setups for mustangs so I'm looking around here to find a v1 t-trim charger my v5 ain't cuttin it I'm getting only 8 psi on the 2.5 pully

June 23rd, 2011, 08:49 PM	#4
Dejectedangle Newbie Join Date: Jun 2011 Posts: 21 iTrader: 0 reviews	A clockwise rotation also!!! Don't matter if it's curved or not

June 23rd, 2011, 10:36 PM	#5
stockfairlady Newbie Join Date: Jul 2007 Posts: 5 iTrader: 0 reviews	looks like you have done a lot of work to that eclipse. Nice

July 10th, 2011, 05:32 PM	#6
blally89 Regular 2005 Mustang GT Join Date: Jan 2010 Location: MD Posts: 102 iTrader: 0 reviews	my coworker has one of these cars and i'ts pretty damn quick.. nice work with yours man sorry I dont have the SC your looking for.

September 13th, 2011, 10:24 PM	#8
Dejectedangle Newbie Join Date: Jun 2011 Posts: 21 iTrader: 0 reviews	Got the intercooler all hooked up and found a member to sell me a v1-t trim charger I'm up to 11 psi for now a little over 375 horses I need a retune and meth is getting hooked up next week

September 13th, 2011, 10:27 PM	#9
Dejectedangle Newbie Join Date: Jun 2011 Posts: 21 iTrader: 0 reviews

September 14th, 2011, 11:22 AM	#11
Dejectedangle Newbie Join Date: Jun 2011 Posts: 21 iTrader: 0 reviews	It's filled with rice lmao

October 11th, 2011, 09:53 PM	#15
Dejectedangle Newbie Join Date: Jun 2011 Posts: 21 iTrader: 0 reviews	Thx for the love guys As for the ci from boring 40 over I think it's like high 3.9 so I just rounded up to a 4.0.... Unfortunately it was not a tune issue it was putting 390 to the wheels on 4 strong pulls at 10 psi on stock motor.... Reason for deatonation on piston 3 was I was running no meth injection or front mout intercooler so you guys know how hot the air gets going through vortechs chargers so that was a cause also the stock compression on this car is 10.5:1 so that was also a factor :/... Lmao I drove the champ home on the blown motor.. Getting internals for this car was hard and EXPENCIVE I had to send ross a good piston for them to make me forged ones and Japan and their fucked up bearing sizes like every stock rod had a different bearing thickness so I had Brian crower send me them H beam rods which took care of that mess so Currently I've put 20k on the new motor with 11 psi daily driving so it's holding up amazingly but since then I've added meth and the fmic 1/4 mile I can't beat 13 seconds I have a little traction problem one tire fire lol but here are sum runs nothing special I need my computer hol

October 11th, 2011, 10:08 PM	#17
Dejectedangle Newbie Join Date: Jun 2011 Posts: 21 iTrader: 0 reviews	Got new exhaust put on the car sounds like a v8 at idol I like it Ill have the 1/4 mile runs up in a little http://i897.photobucket.com/albums/a...dangle/083.mp4

October 12th, 2011, 01:43 AM	#19
supermachone Shake N' Bake 1984 Corvette Kessel Run @ Less Than 12 Parsecs Join Date: Sep 2007 Location: Kansas Posts: 5,077 iTrader: 2 reviews	bad ass ride man! __________________ BONER CREW EMPLOYEE - PACKAGE INSPECTOR #1

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

October 11th, 2011, 10:13 PM	#18
Dejectedangle Newbie Join Date: Jun 2011 Posts: 21 iTrader: 0 reviews	Where do I get a hot chick moving avatar

October 23rd, 2011, 11:40 PM	#20
Shaun03GT I Post Entirely Way Too Much 2003 Mustang GT 1/8 - 7.92 @ 91.13mph 1/4 - 12.21 @ 115.84mph Join Date: Sep 2009 Location: Weymouth, MA Posts: 13,450 iTrader: 12 reviews	update? __________________ Vortech V1 Intercooled @ 11psi 394rwhp/392rwtq @ 9.5psi 415rwhp/400rwtq @ 11psi on Methanol Tuned By: Pete @ Performance Dyno Affordable Supercharger Build Guide Supercharger Info for Noobs

Threads Similar to: Supercharged eclipse v6
Thread	Thread Starter	Forum	Replies	Last Post
Me vs. eclipse	96GtGoodz	96-98	31	January 5th, 2008 03:09 PM

All times are GMT -4. The time now is 09:46 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.