[2000Si]

I've been on a buying spree the past month or so...

I've just sold my stock deck, so that money will eventually go to something... dunno what yet.

Brian and I got to work on my speakers this Saturday afternoon. We found out that the stock front speaker size for my car were 5 1/4, and they WERE in fact the stock speakers still in my car. No wonder it sounded like garbage.

A few pics from the install;

We had to do a bit of cutting to get the 6.5s to fit.


Me hooking up my 150w Kenwoods. Damn... I need to shave.


I know, my car is dusty and uh... ashy.


Overall shot of the stock grille which fit perfectly again, along with my new 3/4" tweeter.


Passenger tweeter. These things own. Very loud. Very good sound quality.


I got tired of it for the weekend and decided to hold off on replacing the rears which we noticed were 6x9 Blaupunkts. Don't ask, I'm replacing them anyway with Kenwood 6.5s. I don't care, because I'll reuse the 6x9s in my work truck.

As for the rest of my parts, my brother came out and opened my trunk only to notice my Sway bar I have been putting off. So he decided to do it for me. I need to cut back the material so that it fits around the bar.



Yes I know my trunk is messy.



My only problem is I need to get the exhaust shipped back to RS*R so I can get the correct catback, after that's done I've got a whole list of parts that will be equipped all at once.

My only other interior modification beside my shift knob.


I'd like to get the exhaust off so that I can get up to the back of hte block and figure out how to get the oil pressure gauge hooked up. I have somewhat detailed instructions on how to do it.

Megan Racing Hbrace.


Megan Racing LCAs


Skunk2 Short throw shifter.


I want to get a gasket just incase we break mine and bolt my header on as well.
I don't seem to have a picture of my DC Sports 4-1 header. Ah well.

Sooner or later, I've been searching for the company that ports TBs for cheap as shit, and I can't find the thread or anything on the net about it. I'd like to get this ported over.


Pretty soon I'll have a pretty nice set of bolt ons going on.

[AtlanticBlue99]

damn, you are buying stuff left and right james. im glad you can afford it all though man. i get my xcal 2 in tomorrow and i need to run by the bank after school, deposit a few, fill up on 93octane then mess with the xcal 2

[173speed]

Very nice man I just got a skong 2 intake for my and I put in my strut tower brace and rear coil over just some ship ones some one gave me then drop the shit out of the front but it look high ne-way because I got 17 inch reams on the car

[99mustang232]

porting/polishing and half-shafting tb's really isn't that hard, ever thought about doing it yourself

[2000Si]

Originally Posted by 99mustang232 porting/polishing and half-shafting tb's really isn't that hard, ever thought about doing it yourself

I have no experience in doing it. I neglected to mention that it'll get bored over, AND ported. I think it's 200 for a disassembling cleaning, bore, polish, cleaning, reassembly and shipped back.