Opinions on the Sequential Tail Lights

Arsenal · May 1st, 2009, 11:06 PM

I haven't had a problem with mine in the almost year since I've had it. I've run it through the automatic touchless car wash a few times but it never broke

johnjdpower · May 1st, 2009, 11:59 PM

Originally Posted by Mustangshar

I'm baaaccccckkkk.

Well my antenna base paint is all coming off, but the antenna didn't budge. I cannot get the damn thing off. I'll ask my detailer tomorrow...we should be able to get that thing off

Here Check Out This Instructional Video It helped me get mine replaced!

Mustangshar · May 2nd, 2009, 12:10 AM

Originally Posted by johnjdpower

Here Check Out This Instructional Video It helped me get mine replaced!

Are you amazing!!!! THANKS!!! A freaking video???? I LOVED it!!! It makes total sense now that I see it-no instructions come with any parts. Now I have 2 of those adapters cause it came with..I wonder if the third is still in the console where I had just dumped them all. I do not have those kind of wrenches ...I have this X type I thought pliers. God..I am so not good with owning tools.

I need to get this thing on cause I wrecked the stocker now crap. LOL I wonder why I can't get the thing OFF! No one has this problem? To loosen you go counter clockwise right? Tighten is clockwise

God This is sooooooo lame-SORRY

Arsenal · May 2nd, 2009, 12:14 AM

whaaaaaaaa, you didn't even try turning the other way?

go try again now! GO GO GO! lol

Mustangshar · May 2nd, 2009, 12:19 AM

Originally Posted by Arsenal

whaaaaaaaa, you didn't even try turning the other way?

go try again now! GO GO GO! lol

LOL....wait turn it the other way????? that'll tighten it more..it doesn't even budge in either direction

johnjdpower · May 2nd, 2009, 12:25 AM

Originally Posted by Mustangshar

LOL....wait turn it the other way????? that'll tighten it more..it doesn't even budge in either direction

LOL you need some EXPERT HELP!! It took me all of 5mins to get it to work without any of the adapters necessary. But I have the 05+ so I dont think they are necessary.

1FUN4RD · May 2nd, 2009, 12:29 AM

Lefty Loosey, Righty Tighty

Mustangshar · May 2nd, 2009, 12:43 AM

Ok OK....I didn't KNOW the damn tool I had been using was NOT the tool I needed...I have wrecked the old one. After I saw the video I looked in the tool box and found the adjustable wrench-which I hate BTW.... and the idiot DID IT!

Now I hope it stays on hahaha I know pathetic BUT seriously I have a really nice rachet set but no good wrenches. Video helped yeah OK stop laughing It's ON!

johnjdpower · May 2nd, 2009, 12:54 AM

CONGRATS!! YOU GOT IT TO WORK!

WE ARE ALL PROUD HERE AT MM LOL

1FUN4RD · May 2nd, 2009, 12:57 AM

Woot Woot! You go girl

Lefty · May 2nd, 2009, 12:57 AM

Originally Posted by AMNick

The sequentials will only work with the US Domestic Market harness and tail lights. They'll work on 2003-2004 Cobra's because they have the USDM tail-lights.

Unfortunately 1999-2001 the Cobra's had the export tail lights which have the separate amber turn signal, which means the car gets the export wiring harness too. This is cool because it makes the 99-01's stand out from other Mustangs...but bad news is no aftermarket tails or sequentials with this setup.

...

Mustangshar · May 2nd, 2009, 12:58 AM

Originally Posted by johnjdpower

CONGRATS!! YOU GOT IT TO WORK! WE ARE ALL PROUD HERE AT MM LOL

LMAO! Seriously..how freaking LAME was this, huh?

Plus I hyjacked your thread for your car!!!!

But I am just a WIZ at peel and stick stuff.....

Nowww....back to your car. Are you making a list hitting all the sites to get some bling ideas? I want to help any way I can..I can spend money REALLY good, PROMISE.

johnjdpower · May 2nd, 2009, 01:01 AM

Originally Posted by Mustangshar

I want to help any way I can..I can spend money REALLY good, PROMISE.

Women are QUEENS at doing that. LOL

Mustangshar · May 2nd, 2009, 01:05 AM

Originally Posted by 1FUN4RD

Woot Woot! You go girl

No one has to know about this on May 30th....riiiiight??????

LOL They have not SEEN this thread yet..soooooo let it die.

Mustangshar · May 2nd, 2009, 01:09 AM

Originally Posted by johnjdpower

Women are QUEENS at doing that. LOL

Damn proud of it! Haha..

So did you give any thought to some added bling?? YES definately get the sequentials, no I do NOT install.

What about interior? I keep saying that because it is relatively low cost and I love what I did to mine. It just looks BLING when you get in, instant gratification. Plus that link I posted, those are KNOBS and not COVERS-much better IMO.

I also have chrome grooved vent covers, THOSE are amazing, look really sweet. So your ideas??

1FUN4RD · May 2nd, 2009, 01:14 AM

Originally Posted by Mustangshar

No one has to know about this on May 30th....riiiiight?????? LOL They have not SEEN this thread yet..soooooo let it die.

It will be our little secret

Arsenal · May 2nd, 2009, 01:17 AM

Originally Posted by Mustangshar

Damn proud of it! Haha..

So did you give any thought to some added bling?? YES definately get the sequentials, no I do NOT install.

What about interior? I keep saying that because it is relatively low cost and I love what I did to mine. It just looks BLING when you get in, instant gratification. Plus that link I posted, those are KNOBS and not COVERS-much better IMO.

I also have chrome grooved vent covers, THOSE are amazing, look really sweet. So your ideas??

you didn't install your sequential tail lights yourself?!?!?!? Crazy money wasting fool!

All you have to do is unplug a couple things, then plug a couple more things back in, no tools required. lol

Mustangshar · May 2nd, 2009, 01:50 AM

Originally Posted by 1FUN4RD

It will be our little secret

Originally Posted by Arsenal

you didn't install your sequential tail lights yourself?!?!?!? Crazy money wasting fool! All you have to do is unplug a couple things, then plug a couple more things back in, no tools required. lol

I know my limitations : ) Besides....I suppose I could have asked the Guys to help me do the install but with working Saturdays now..my time is pretty limited. Yes, I take alot of crap for having parts installed.. Oh well. If I was married to a car guy, I'd learn alot. But was married to a cop so all I know is how to SHOOT.

johnjdpower · May 2nd, 2009, 03:03 AM

As for any ideas of mine I do not have anything in mind as of now to change. The knobs are pretty nice. I drove the 2010 mustang and saw one on the street today in Long Beach area of Cali and to be honest, they dont look as mean as the 05-09 gen

I was rather dissappointed.

Mustangshar · May 2nd, 2009, 04:59 PM

I haven't seen 2010 on the streets yet..but the special interior "ambient" lighting is sweet! I like the hood and would have loved to get that on my ride BUT I hear they are not be interchangable. So in the 06 tradition..I'm keeping my ugly boring hood ONLY because it is 2006 model.

View Poll Results: What do you think of Sequential Lights?
Looks Great!	24	92.31%
Waste of Money.	2	7.69%
Never heard of	0	0%
Voters: 26. You may not vote on this poll

May 2nd, 2009, 12:29 AM	#27
1FUN4RD MMs Ford Racing Nut Swinger 2007 MUSTANG GT Join Date: Feb 2008 Location: CENTRAL IOWA Posts: 4,360 iTrader: 3 reviews	Lefty Loosey, Righty Tighty __________________ www.1fun4rd.blogspot.com

May 2nd, 2009, 12:43 AM	#28
Mustangshar Hardcore Enthusiast 2006 Mustang GT Vert Join Date: Sep 2008 Location: Chicago Burbs Posts: 2,153 iTrader: 0 reviews	Ok OK....I didn't KNOW the damn tool I had been using was NOT the tool I needed...I have wrecked the old one. After I saw the video I looked in the tool box and found the adjustable wrench-which I hate BTW.... and the idiot DID IT! Now I hope it stays on hahaha I know pathetic BUT seriously I have a really nice rachet set but no good wrenches. Video helped yeah OK stop laughing It's ON! __________________ Sharon Don't go there....... 06 GT: MM & FF 12/07 Ladies Edition issue: will never be done

May 2nd, 2009, 12:57 AM	#30
1FUN4RD MMs Ford Racing Nut Swinger 2007 MUSTANG GT Join Date: Feb 2008 Location: CENTRAL IOWA Posts: 4,360 iTrader: 3 reviews	Woot Woot! You go girl __________________ www.1fun4rd.blogspot.com

May 2nd, 2009, 04:59 PM	#40
Mustangshar Hardcore Enthusiast 2006 Mustang GT Vert Join Date: Sep 2008 Location: Chicago Burbs Posts: 2,153 iTrader: 0 reviews	I haven't seen 2010 on the streets yet..but the special interior "ambient" lighting is sweet! I like the hood and would have loved to get that on my ride BUT I hear they are not be interchangable. So in the 06 tradition..I'm keeping my ugly boring hood ONLY because it is 2006 model. __________________ Sharon Don't go there....... 06 GT: MM & FF 12/07 Ladies Edition issue: will never be done

May 2nd, 2009, 12:54 AM	#29
johnjdpower Newbie 2005 Mustang V6 Join Date: Apr 2009 Location: Los Angeles Area Posts: 28 iTrader: 0 reviews	CONGRATS!! YOU GOT IT TO WORK! WE ARE ALL PROUD HERE AT MM LOL

May 2nd, 2009, 03:03 AM	#39
johnjdpower Newbie 2005 Mustang V6 Join Date: Apr 2009 Location: Los Angeles Area Posts: 28 iTrader: 0 reviews	As for any ideas of mine I do not have anything in mind as of now to change. The knobs are pretty nice. I drove the 2010 mustang and saw one on the street today in Long Beach area of Cali and to be honest, they dont look as mean as the 05-09 gen I was rather dissappointed.

Remove Advertisements Sponsored Links
Forums at Modded Mustangs Advertisement Advertisement

Threads Similar to: Opinions on the Sequential Tail Lights
Thread	Thread Starter	Forum	Replies	Last Post
Make your own sequential tail lights	06GTMustang89	2005 - 2010	22	October 21st, 2008 07:06 PM
sequential tail lights	Matt060301	2005 - 2010	7	September 25th, 2008 04:47 PM
Sequential Tail Lights?	Roos85	99-04	14	May 25th, 2008 07:31 PM
Sequential tail lights	05bluestang	2005 - 2010	18	February 22nd, 2008 01:25 PM
Sequential tail lights	Murderjetz	Visual	11	April 28th, 2007 08:58 AM

All times are GMT -4. The time now is 08:07 PM.
Contact Us - Modded Mustangs - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.