|
1996 Mustang Side mirror install?the cover over the speaker will pop off with some prying. then some screws hold the tweeter enclosure in. after thats off its 3 nuts an it comes off...
|
Posted Today at 02:50 PM by 96_5.0_Mustang
|
|
|
What to do next on my 01 GTyou've got it breathing good, now you have to have it exhale good. add some long tubes, mid pipe, and exhaust. then go for some taller gears, then the power adder. thats what im doing.
|
|
Posted November 17th, 2009 at 10:51 PM by KrazyStang
|
|
|
What to do next on my 01 GTim on the same boat, am thinking of getting sum taller gears
|
|
Posted November 17th, 2009 at 12:02 AM by stangman92
|
|
|
HelpThanks Rhino!
HerrmannT |
|
Posted November 15th, 2009 at 04:16 PM by Herrmann "T"
|
|
|
New Guy2006 gt! Thanks for the reply! Q: how do I post a new thread
so I can get more feed back on a time line will be deploying again overseas! Pypes axel back delete JLT SCT3 Brenspeed Tune UPR catch cans can't believe how much crap they catch |
|
Posted November 15th, 2009 at 04:14 PM by Herrmann "T"
|
|
|
New GuyI don't know what kind of car you've got, but if it's a Mach, no need for an underdrive pulley.
|
|
Posted November 15th, 2009 at 03:43 PM by FluffyTheRhino
|
|
|
HelpI can see it.
|
|
Posted November 15th, 2009 at 03:42 PM by FluffyTheRhino
|
|
|
transmission problem, need advice,and or info.i just got my 'stang back and it did the same thing. i was being stupid of course but thats a different story. i'm the end i had the same problem. my transmission gave out and i thought that was it cuz its been running the original with no work done to it since'93. but that wasn't the only problem, my rear differential was completely done for. if your tranny is fine it might be that cuz when i fixed the tranny it still didn't move. so get that checked out hopefully i was a help
|
|
Posted November 12th, 2009 at 06:15 PM by Azneugis3000
|
