Need An Opinion On A Brake Setup

SlideFox · February 25th, 2008, 01:10 PM

Hey Everyone,

Since I purchased my vehicle, there are a few things that I am tackling right off the bat. The first big thing is the brakes. My rears are in pretty good condition, but the fronts are slightly glazed, and there is a little bit of rust on the rotor hub. The major reason I am replacing is the pulsation in the pedal and steering wheel during braking.

Soooooo, since I always seem to replace things with better aftermarket stuff (Why do people buy stock???), I need some help choosing a setup. I don't know if I want to go all out like a Wilwood kit, but I want something more then upgraded pads, and powerslot rotors. I have been eyeballing this kit off of American Muscle:

It's a Ford Racing 10th Anniversary Cobra Brake Upgrade Kit. I'm thinking about getting this kit, but without the rotors, and ordering some Brembo X-Drilled/Slotted (Front and Rear). Opinions anyone? Thanks!!!

SlideFox · February 25th, 2008, 09:17 PM

Bump

HMUSN · February 25th, 2008, 09:20 PM

it's a good upgrade.

do you have a question about it?

SlideFox · February 25th, 2008, 09:24 PM

I just wanted to see if anyone has had experience with this upgrade, or knows of a better one. Not sure if I should go this route or with like a Wilwood setup. I do plan on tracking the car a little bit.

HMUSN · February 25th, 2008, 09:27 PM

that kit will work fine with your car.

a Cobra set up is good to go.
and yes.. they go up to 6 piston caliper kits.. lol

no need for that

SlideFox · February 25th, 2008, 09:42 PM

Thanks! I'm gonna see if they will sell that kit with different rotors... I don't think I need 6-POT Calipers yet!!! LOL

February 25th, 2008, 01:10 PM	#1
SlideFox Regular 2000 Mustang V6 Join Date: Feb 2008 Location: Chandler, AZ Posts: 201	Need An Opinion On A Brake Setup Hey Everyone, Since I purchased my vehicle, there are a few things that I am tackling right off the bat. The first big thing is the brakes. My rears are in pretty good condition, but the fronts are slightly glazed, and there is a little bit of rust on the rotor hub. The major reason I am replacing is the pulsation in the pedal and steering wheel during braking. Soooooo, since I always seem to replace things with better aftermarket stuff (Why do people buy stock???), I need some help choosing a setup. I don't know if I want to go all out like a Wilwood kit, but I want something more then upgraded pads, and powerslot rotors. I have been eyeballing this kit off of American Muscle: It's a Ford Racing 10th Anniversary Cobra Brake Upgrade Kit. I'm thinking about getting this kit, but without the rotors, and ordering some Brembo X-Drilled/Slotted (Front and Rear). Opinions anyone? Thanks!!! __________________ '00 Silver Mustang V6 Coupe 18x9 Black Bullitt Front Wheels 18x10 Black Bullitt Rear Wheels Nitto NT-555 Tires Steeda Short Shifter BBK Intake Mach 1 Chin Spoiler w/ Grill Delete Projector Headlights

February 25th, 2008, 09:17 PM	#2
SlideFox Regular 2000 Mustang V6 Join Date: Feb 2008 Location: Chandler, AZ Posts: 201	Bump __________________ '00 Silver Mustang V6 Coupe 18x9 Black Bullitt Front Wheels 18x10 Black Bullitt Rear Wheels Nitto NT-555 Tires Steeda Short Shifter BBK Intake Mach 1 Chin Spoiler w/ Grill Delete Projector Headlights

February 25th, 2008, 09:24 PM	#4
SlideFox Regular 2000 Mustang V6 Join Date: Feb 2008 Location: Chandler, AZ Posts: 201	I just wanted to see if anyone has had experience with this upgrade, or knows of a better one. Not sure if I should go this route or with like a Wilwood setup. I do plan on tracking the car a little bit. __________________ '00 Silver Mustang V6 Coupe 18x9 Black Bullitt Front Wheels 18x10 Black Bullitt Rear Wheels Nitto NT-555 Tires Steeda Short Shifter BBK Intake Mach 1 Chin Spoiler w/ Grill Delete Projector Headlights

February 25th, 2008, 09:42 PM	#6
SlideFox Regular 2000 Mustang V6 Join Date: Feb 2008 Location: Chandler, AZ Posts: 201	Thanks! I'm gonna see if they will sell that kit with different rotors... I don't think I need 6-POT Calipers yet!!! LOL __________________ '00 Silver Mustang V6 Coupe 18x9 Black Bullitt Front Wheels 18x10 Black Bullitt Rear Wheels Nitto NT-555 Tires Steeda Short Shifter BBK Intake Mach 1 Chin Spoiler w/ Grill Delete Projector Headlights

Threads Similar to: Need An Opinion On A Brake Setup
Thread	Thread Starter	Forum	Replies	Last Post
Alpine IVA-D310 foot brake and e brake switch ?s	97Cobra	Electronics	2	February 2nd, 2008 07:31 PM
Brake light switch problem after upgrading brake booster	black88	5.0 Mustangs	2	January 20th, 2008 11:41 PM
Brake Upgrades/ SN95 Spindles and Cobra Big Brake Kits	OcOnnor220	Modular Mustangs	2	July 8th, 2007 12:36 AM
Cobra brake or bullit brake upgrade	97gtstang	96-98	5	May 14th, 2007 02:15 AM
Opinion	Sh0gun!	2005+	16	April 12th, 2007 08:35 AM

All times are GMT -4. The time now is 09:26 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.