hi-pro exhaust manifolds

bobt28 · January 13th, 2007, 10:04 PM

I'm getting ready to put a set of factory type HI-PRO exhaust manifolds on a 1966 289 coupe. The question is; Do I have to modifiy the motor mounts and fan to do this. Dallas Mustang, where I brought the manifolds says they just bolt right on.....however two people have said when they did it, the mounts had to be raised 3/4" for clearance. Anybody have any experience w/ hi-pro exhaust manifolds. Thanks for the help, Bob

Horseshoeing · January 14th, 2007, 09:54 AM

Is this what you are talking about? If so, I don't see why you would, but if know people that have, ask them why. Then call Dallas Mustang and ask them and tell them about the guys that had to modifiy the motor mounts and fan.

http://www.dallasmustang.com/page/pr...=&product=2347

January 13th, 2007, 10:04 PM	#1
bobt28 Look Ma! My First Post! Join Date: Jan 2007 Posts: 1	hi-pro exhaust manifolds I'm getting ready to put a set of factory type HI-PRO exhaust manifolds on a 1966 289 coupe. The question is; Do I have to modifiy the motor mounts and fan to do this. Dallas Mustang, where I brought the manifolds says they just bolt right on.....however two people have said when they did it, the mounts had to be raised 3/4" for clearance. Anybody have any experience w/ hi-pro exhaust manifolds. Thanks for the help, Bob

January 14th, 2007, 09:54 AM	#2
Horseshoeing Classic Moderator Join Date: Aug 2005 Location: GA Posts: 4,179	Is this what you are talking about? If so, I don't see why you would, but if know people that have, ask them why. Then call Dallas Mustang and ask them and tell them about the guys that had to modifiy the motor mounts and fan. http://www.dallasmustang.com/page/pr...=&product=2347 __________________ Classic Mustangs are the best! Get one.

Threads Similar to: hi-pro exhaust manifolds
Thread	Thread Starter	Forum	Replies	Last Post
Exhaust Manifolds	zombiewraps	V6 Mustangs	16	August 8th, 2007 01:06 AM
Replacing exhaust manifolds with headers, need help!	Aeriform	V6 Mustangs	3	July 17th, 2007 07:59 PM
2002 EXHAUST MANIFOLDS...	Casper98GT	V6 Mustangs	11	May 16th, 2007 10:29 AM
Exhaust Manifolds	lwhitetrash88l	V6 Mustangs	1	April 11th, 2007 11:45 AM
intake manifolds............	ERIC	99-04	1	January 21st, 2007 11:54 AM

All times are GMT -4. The time now is 05:38 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.