| ![]() | ||||||||||||
| |||||||||||||
|
|||||||
![]() |
|
|
|
LinkBack | Thread Tools |
|
|
#1 |
|
Newbie
Join Date: Oct 2009
Posts: 5
![]() iTrader: 0 reviews
|
gauges not working on my 69
so none of my gauges work at all, even the speedometer i swapped the speedo cable and the speedometer still doesnt work. its a non tach cluster. i took apart the dash and got back there and looked around and as far as i can tell all the wires are hooked up. the lights to light up the gauges work if that means anything. but i dont know what to look into next, so any help is greatly apreciated
|
|
| Sponsored Links | |||
Advertisement | |||
|
|
#2 |
|
I'm Hella From Nor*Cal
2008 GTI
14.65 @ 99.83
Join Date: Jan 2007
Location: Nor*Cal Suckas! >;)
Posts: 1,194
![]() ![]() ![]() iTrader: 0 reviews
|
have you checked the engine harness? it's group of wires one to the oil pressure sending unit, one to the coil, and one to the temp sending unit on the intake. make sure those are hooked up and the wires aren't broken. as for the speedo, idk, maybe some of the other members can chime in on that....is your speedo gear good on the tranny and on the cable? try hooking up the speedo cable gear up to like a drill or something and have someone run the drill, while you check on the speedo....
__________________
The Curse's tranny bleeding like a stuck pig 600 CFM Edelbrock, Hookers, Pertronix dizzy, Accel coil, GT40 heads, 5.0 h.o,Super 44's, SSBC, FRPP 9mm wires
|
|
| Sponsored Links | |
Advertisement | |
![]() |
| Thread Tools | |
|
|
Threads Similar to: gauges not working on my 69
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| What I have been working on.... | MustangMatt96GT | The Clubhouse | 10 | August 9th, 2009 04:46 PM |
| A/C not working. | 07 STROKER | 2005 - 2010 | 27 | July 3rd, 2009 08:19 PM |
| Working | AMmuslGT | The Clubhouse | 1 | June 4th, 2009 10:09 PM |
| AC not working | BoostHard1210 | 99-04 | 15 | May 12th, 2009 02:20 AM |
| my a/c is not working | XPLICITSTANG | 99-04 | 7 | November 11th, 2008 01:56 AM |