ok Im doing it

ChrisJ · March 1st, 2008, 01:32 PM

redhumphries - Photobucket - Video and Image Hosting

^^^^Definitely Saving My Favorites^^^^

Please keep us updated on this...

This is going to be one sick pony...

jspagna1 · March 1st, 2008, 01:34 PM

Man that's a lot of motor. That is a hell of a Mod to. It's going to look pretty trick at the car shows.

redhumphries · March 1st, 2008, 06:23 PM

will make a few shows but the man that I am building it for will drive it daily, weather permiting and also on trips up and down the interstate, I built him a 70 428 cj car 4 years ago and he has driven it to Baltimore Md from Charlotte nc 16 times since. He loves his cars and I love the fact he drives them. RED

nba1341 · March 2nd, 2008, 04:03 AM

^yea its like why spend all the money on the car and not even drive it

Tony_90fox · March 2nd, 2008, 05:47 PM

sweet!!!

redhumphries · March 2nd, 2008, 09:05 PM

drivers rocker taken out

redhumphries · March 2nd, 2008, 09:07 PM

new rocker installed door lined up

redhumphries · March 2nd, 2008, 09:09 PM

passenger rocker taken out see the reason people say cars rust out that in the inside of the outer rocker

redhumphries · March 2nd, 2008, 09:11 PM

both rockers, all t

orque boxes, installed then cut out the floor

redhumphries · March 2nd, 2008, 09:13 PM

floors, seat riser, rockers and torque boxes now time for new front suspension

redhumphries · March 2nd, 2008, 09:15 PM

set car up level so I could cut off the front. Wish I knew how to post more than one photo at a time would be

alot easier

redhumphries · March 2nd, 2008, 09:19 PM

I hope posting one photo at a time doesn't bother anyone cut on dotted line and roll out of the way

460brevill · March 2nd, 2008, 09:55 PM

i drive my 66 coupe weekly.i built it to drive, and thats what i do.

tnknepp · March 3rd, 2008, 08:48 AM

I don't mind you posting one at a time! Keep them coming, this is an awesome project.

redhumphries · March 4th, 2008, 03:59 PM

checking line up prior t

o welding

redhumphries · March 4th, 2008, 04:00 PM

installed fenders to make sure they would line up with the doors and check for square

redhumphries · March 4th, 2008, 04:01 PM

welded the lower suspension mount to stub on rail this is pass side

redhumphries · March 4th, 2008, 04:03 PM

with the suspension welded and square it is time to mount the engine

redhumphries · March 4th, 2008, 04:04 PM

engine in shifter in stock location for 6 spd

redhumphries · March 4th, 2008, 04:06 PM

with motor in I reinstalled the fenders and hood to check for clearance the hood is sitting alittle lower no hood stops yet but it clears great. don't you just love a smile on a hood

March 1st, 2008, 01:32 PM	#21
ChrisJ The Cable Guy... 2002 Mustang GT SLOW Join Date: Jun 2006 Location: Shepherdsville, Kentucky Posts: 15,372	redhumphries - Photobucket - Video and Image Hosting ^^^^Definitely Saving My Favorites^^^^ Please keep us updated on this... This is going to be one sick pony... __________________ My Junk www.myspace.com/cjobe

March 1st, 2008, 01:34 PM	#22
jspagna1 Newbie Join Date: Nov 2007 Location: Connecticut Posts: 45	Man that's a lot of motor. That is a hell of a Mod to. It's going to look pretty trick at the car shows. __________________ 1966 Mustang Coupe Ford Racing 5.0 HO Roller Motor/B303 Cam/1.7 RR TFS TW 205 Heads/Ceramic Coated Tri-Y Headers Edelbrock Performer RPM/Holley 650 DP 8 qrt Milodon oil pan/Griffin aluminum radiator Mallory Distributor/MSD/Holley Electric Fuel Pump 2.5" Exhaust with H pipe/2 chamber Flowmasters Auburn 3:55's rear/Aluminum drive shaft + loop SSBC disc brakes/C-4 wTCI 2800 15x6/15x7 Torque Thrust D's BFG Drag Radials Fiberglass Shelby hood/frt valance/trunk/bumpers

March 2nd, 2008, 09:11 PM	#29
redhumphries Regular Join Date: Dec 2007 Posts: 80	both rockers, all torque boxes, installed then cut out the floor

March 2nd, 2008, 09:55 PM	#33
460brevill Enthusiast Join Date: Apr 2007 Location: Farmville VA Posts: 782	i drive my 66 coupe weekly.i built it to drive, and thats what i do. __________________ i sixing 200 six with 300 hp.

March 4th, 2008, 04:01 PM	#37
redhumphries Regular Join Date: Dec 2007 Posts: 80	welded the lower suspension mount to stub on rail this is pass side Last edited by redhumphries : March 4th, 2008 at 04:07 PM.

March 1st, 2008, 06:23 PM	#23
redhumphries Regular Join Date: Dec 2007 Posts: 80	will make a few shows but the man that I am building it for will drive it daily, weather permiting and also on trips up and down the interstate, I built him a 70 428 cj car 4 years ago and he has driven it to Baltimore Md from Charlotte nc 16 times since. He loves his cars and I love the fact he drives them. RED

March 2nd, 2008, 04:03 AM	#24
nba1341 Banned 1965 Mustang Fastback Join Date: Apr 2007 Location: Los Angeles, Cal Posts: 24,982 Posts: 2,193	^yea its like why spend all the money on the car and not even drive it

March 2nd, 2008, 05:47 PM	#25
Tony_90fox MM Fanatic Join Date: Jun 2006 Location: Bowling Green, KY Posts: 3,445	sweet!!!

March 2nd, 2008, 09:05 PM	#26
redhumphries Regular Join Date: Dec 2007 Posts: 80	drivers rocker taken out

March 2nd, 2008, 09:07 PM	#27
redhumphries Regular Join Date: Dec 2007 Posts: 80	new rocker installed door lined up

March 2nd, 2008, 09:09 PM	#28
redhumphries Regular Join Date: Dec 2007 Posts: 80	passenger rocker taken out see the reason people say cars rust out that in the inside of the outer rocker

March 2nd, 2008, 09:13 PM	#30
redhumphries Regular Join Date: Dec 2007 Posts: 80	floors, seat riser, rockers and torque boxes now time for new front suspension

March 2nd, 2008, 09:15 PM	#31
redhumphries Regular Join Date: Dec 2007 Posts: 80	set car up level so I could cut off the front. Wish I knew how to post more than one photo at a time would be alot easier

March 2nd, 2008, 09:19 PM	#32
redhumphries Regular Join Date: Dec 2007 Posts: 80	I hope posting one photo at a time doesn't bother anyone cut on dotted line and roll out of the way

March 3rd, 2008, 08:48 AM	#34
tnknepp Regular 1967 Mustange Coupe, 200i Join Date: Jul 2007 Location: Indiana Posts: 57	I don't mind you posting one at a time! Keep them coming, this is an awesome project.

All times are GMT -4. The time now is 10:54 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.

March 4th, 2008, 03:59 PM	#35
redhumphries Regular Join Date: Dec 2007 Posts: 80	checking line up prior t o welding

March 4th, 2008, 04:00 PM	#36
redhumphries Regular Join Date: Dec 2007 Posts: 80	installed fenders to make sure they would line up with the doors and check for square

March 4th, 2008, 04:03 PM	#38
redhumphries Regular Join Date: Dec 2007 Posts: 80	with the suspension welded and square it is time to mount the engine

March 4th, 2008, 04:04 PM	#39
redhumphries Regular Join Date: Dec 2007 Posts: 80	engine in shifter in stock location for 6 spd

March 4th, 2008, 04:06 PM	#40
redhumphries Regular Join Date: Dec 2007 Posts: 80	with motor in I reinstalled the fenders and hood to check for clearance the hood is sitting alittle lower no hood stops yet but it clears great. don't you just love a smile on a hood