Floor Pan

dwmb25 · February 10th, 2008, 12:02 PM

I am looking for a complete floor pan for my 1969 fastback. I have found several different options and was woundering if any one has any suggestion on which one may work the best.

460brevill · February 10th, 2008, 01:25 PM

most aftermarket pans are about the same.just clamp the body in place fore and aft and start cutting and welding.

8t6gt · February 14th, 2008, 01:52 AM

We put a full floor pan in our 70 Boss

They are great and very happy I did it.
Bought it from here NPDLink | National Parts Depot

CooterTKE · February 14th, 2008, 01:18 PM

basically all the same and not hard to do even if your not good at welding.

blksn8k · February 17th, 2008, 10:02 AM

I did a full pan in my 70 Mach 1 even though the previous owner had purchased patch panels but had not installed them. I did not want to deal with hiding all the seams. It just makes for a cleaner finished product.

February 10th, 2008, 12:02 PM	#1
dwmb25 Newbie Join Date: Feb 2008 Posts: 3	Floor Pan I am looking for a complete floor pan for my 1969 fastback. I have found several different options and was woundering if any one has any suggestion on which one may work the best.

February 10th, 2008, 01:25 PM	#2
460brevill Enthusiast Join Date: Apr 2007 Location: Farmville VA Posts: 782	most aftermarket pans are about the same.just clamp the body in place fore and aft and start cutting and welding. __________________ i sixing 200 six with 300 hp.

February 17th, 2008, 10:02 AM	#5
blksn8k Newbie 1999 Mustang Cobra Join Date: Dec 2007 Location: Ohio Posts: 25	I did a full pan in my 70 Mach 1 even though the previous owner had purchased patch panels but had not installed them. I did not want to deal with hiding all the seams. It just makes for a cleaner finished product. __________________ 67 Ranchero 460/C6 70 Mach 1 428/4-speed 75 Bronco 393W/5-speed 89 T-Bird SC 5-speed 99 Mustang Cobra 07 Sport Trac

Threads Similar to: Floor Pan
Thread	Thread Starter	Forum	Replies	Last Post
Noise from under floor	Mach Boy	4V / SVT	9	February 8th, 2008 02:14 AM
floor sealant	JASonic	The Clubhouse	3	November 15th, 2007 12:15 AM
where to get some floor mats??	droppedbass87	96-98	8	September 19th, 2007 11:39 PM
Floor Pan Installation	tnknepp	Classic Mustangs	5	July 20th, 2007 09:08 AM
Floor Mats	casey	V6 Mustangs	4	September 13th, 2006 10:17 PM

February 14th, 2008, 01:18 PM	#4
CooterTKE Newbie 1967 Mustang Deluxe Join Date: Feb 2008 Location: Gresham, OR Posts: 21	basically all the same and not hard to do even if your not good at welding.

All times are GMT -4. The time now is 11:11 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.