Forums at Modded Mustangs
Home Register FAQ Members List Calendar Blogs Garage Gallery Search Today's Posts Mark Forums Read


Go Back   Forums at Modded Mustangs > Mustang Forums > Classic Mustangs

Discussing Electrical Help in the Classic Mustangs Forum. Need a little help trouble shooting my 1966 Mustang.... I am an electrical moron. My ...

       

Modded Mustangs is the premier Ford Mustang Forum on the internet. We discuss all aspects of the Ford Mustang on the forum. Registered Users do not see the above ads. Please Register - It's Free!

 
LinkBack Thread Tools
Old March 7th, 2008, 11:50 AM   #1
Newbie
 
JDMILLS's Avatar
 
1966 Mustang
 
Join Date: May 2007
Location: South West
Posts: 6
Question

Electrical Help


Need a little help trouble shooting my 1966 Mustang.... I am an electrical moron. My right front passenger turn signal stopped working. So far I have
checked the park lights, and they all work. I checked the wiring in the
steering column and nothing is loose. I have replaced the bulb with a
new bulb and only the park light filament comes on in the bulb. all the
other turn signals work on the car. The passenger side rear works, so I
know it can't be the turn signal plug. Help Help Help... I would
greatly appreciate any and all trouble shooting ideas, because this is
my daily driver and I'd like to avoid a ticket. I spent 3 hours in my
garage scratching my head last night and am about to give up and get an
orange flashlight and flick it on and off for left turns hahaha.
 
Old March 7th, 2008, 12:55 PM   #2
Regular
 
1965 Coupe
 
Join Date: Oct 2007
Location: Oregon
Posts: 290
Default

check the switch, and the grounds, and the relays
__________________
http://i17.photobucket.com/albums/b57/mustangclint/SIG-Zers.jpg
 
Old March 7th, 2008, 04:13 PM   #3
Enthusiast
 
 
Join Date: Apr 2007
Location: Farmville VA
Posts: 785
Default

you have a plug on that signal harness.unplug it and take a test light and check the wires in the harness to see if one is blinking with turn sig on.a lot of times the springs in the light plug get weak or stuck and it want make connection .hope this helps.
__________________
i sixing 200 six with 300 hp.
 
Old March 7th, 2008, 07:48 PM   #4
Regular
 
MustangOne's Avatar
 
1968 GT 500 Super Snake
12.6 @ 114.3
 
Join Date: Mar 2008
Location: Sapulpa Oklahoma
Posts: 332
Default

And if that dosnt blink for you, need to check the turn signal switch to see if the front point contact in the switch has melted. It is kinda hard to check, you have to remove your steering wheel. Good Luck
 
Reply



Thread Tools


Threads Similar to: Electrical Help
Thread Thread Starter Forum Replies Last Post
electrical trouble ddashtrois 99-04 11 March 6th, 2008 04:09 PM
electrical help bobb17 2.3 Mustangs 10 February 10th, 2008 11:27 PM
Electrical help... joeice14 2005+ 8 January 30th, 2008 01:34 AM
Big Electrical Problem scr110 Electronics 8 June 16th, 2007 10:26 AM
Need Electrical HELP!!! monkey187 Electronics 8 March 19th, 2007 10:41 PM


All times are GMT -4. The time now is 01:30 AM.
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company.
Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.