windshield trim

01dutchGT · March 25th, 2008, 10:15 AM

What is the best way to get this trim off without braking or bending it? If its just easier to bu new repo stuff then I will but from experience repo stuff never fits rights.

tnknepp · March 25th, 2008, 12:50 PM

I've had good experience with using a screw-driver to very gently and very carefully and very slowly remove it. Just slide the screw driver under the trim and take your time. Though I have to admit, that I have still bent the trim using this method.

MustangOne · March 25th, 2008, 06:08 PM

If you go to your local tool store. This is the one I Use. cost about $10. When you can keep your ford molding always do.

Installing New Front And Rear Glass On A Classic Ford Mustang - Mustang Monthly Magazine

460brevill · March 25th, 2008, 07:54 PM

so far that is the best tool i have found too.just take your time.

01dutchGT · March 25th, 2008, 10:40 PM

thanks for all the help guys. I did it with a screwdriver but that tool would have worked alot better. Its all off in one piece so now its time for headliner and new weatherstriping.

March 25th, 2008, 10:15 AM	#1
01dutchGT Regular Join Date: Jun 2007 Location: Houston, Texas Posts: 324	windshield trim What is the best way to get this trim off without braking or bending it? If its just easier to bu new repo stuff then I will but from experience repo stuff never fits rights. __________________ 2001 mustang gt 5 speed Full bolt ons with 4.10 gears. 1965 Mustang 302 with 4 Barrel edelbrock 600cfm, T5 transmission, Hurst short throw shifter. In the process of restoring it...

March 25th, 2008, 06:08 PM	#3
MustangOne Regular 1968 GT 500 Super Snake 12.6 @ 114.3 Join Date: Mar 2008 Location: Sapulpa Oklahoma Posts: 243	If you go to your local tool store. This is the one I Use. cost about $10. When you can keep your ford molding always do. Installing New Front And Rear Glass On A Classic Ford Mustang - Mustang Monthly Magazine __________________ www.Mustang1.Com Last edited by MustangOne : March 25th, 2008 at 06:12 PM.

March 25th, 2008, 07:54 PM	#4
460brevill Enthusiast Join Date: Apr 2007 Location: Farmville VA Posts: 758	so far that is the best tool i have found too.just take your time. __________________ i sixing 200 six with 300 hp.

March 25th, 2008, 10:40 PM	#5
01dutchGT Regular Join Date: Jun 2007 Location: Houston, Texas Posts: 324	thanks for all the help guys. I did it with a screwdriver but that tool would have worked alot better. Its all off in one piece so now its time for headliner and new weatherstriping. __________________ 2001 mustang gt 5 speed Full bolt ons with 4.10 gears. 1965 Mustang 302 with 4 Barrel edelbrock 600cfm, T5 transmission, Hurst short throw shifter. In the process of restoring it...

Threads Similar to: windshield trim
Thread	Thread Starter	Forum	Replies	Last Post
windshield wipers	tom2000r	99-04	14	March 18th, 2008 03:31 PM
need help with fog on windshield	91cobra5.0	5.0 Mustangs	8	March 3rd, 2008 05:39 PM
Windshield	RhadCundell	V6 Mustangs	19	December 2nd, 2007 11:31 PM
Where can I get a windshield	stanglifemike	96-98	4	July 12th, 2007 12:44 PM
Windshield tint?	budman	2005+	11	April 29th, 2007 07:00 PM

March 25th, 2008, 12:50 PM	#2
tnknepp Regular 1967 Mustange Coupe, 200i Join Date: Jul 2007 Location: Indiana Posts: 55	I've had good experience with using a screw-driver to very gently and very carefully and very slowly remove it. Just slide the screw driver under the trim and take your time. Though I have to admit, that I have still bent the trim using this method.

All times are GMT -4. The time now is 09:24 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.