Got a 69!

Grabber523 · April 15th, 2008, 10:02 AM

I purchased a 69 Mustang Grande for $2500 this weekend, got big plans to restomod. The body's pretty clean and the original 302 and tranny combo run strong but aren't staying in it. It needs a full interior and pretty much completely re-wired, but I can do most of the work myself. I have a small-block 427 picked out already, looking to do an auto to 5 or 6-speed manual swap. If you guys have any good restoration websites (I already have a ton of stuff I'll be getting from ebay and Year One), pointers or suggestions to find little stuff like trim, walnut wood grain pieces, knobs, switches, wiring harnesses, manual tranny clutch pedal brackets, full A/C systems, 4-corner coil-over conversions, etc, it would be appreciated. Also, I don't know if they make a set of seat rails that will bolt up to a set of 2005+ seats. Anyone seen anything like this? Sorry for such a long post, I'm just real excited. Pics will be posted as soon as I can...no photobucket access at work.

95blackbeauty · April 15th, 2008, 01:52 PM

When I re did my 65...it was junk yard mania for me. just trolling around trying to find little pieces.

MustangOne · April 15th, 2008, 03:34 PM

Originally Posted by Grabber523

looking to do an auto to 5 or 6-speed manual swap. If you guys have any good restoration websites (I already have a ton of stuff I'll be getting from ebay and Year One), pointers or suggestions to find little stuff like trim, walnut wood grain pieces, knobs, switches, wiring harnesses, manual tranny clutch pedal brackets, full A/C systems, 4-corner coil-over conversions, etc, .

Hey Grabber,

I can help you get all the New and Used Parts. What you are looking for is what we do. You will like the prices also.

nba1341 · April 15th, 2008, 05:48 PM

pictures

Grabber523 · April 15th, 2008, 09:48 PM

This is the only one I got so far...still have to go pick it up. Should have more up tomorow, especially of the interior (or lack thereof).

sneakygt91 · April 23rd, 2008, 08:04 PM

very nice...get some more pics up.

slapwig · April 29th, 2008, 08:24 PM

That's really nice. You paid less money for nicer car than my piece of crap...good luck on the build

jdansby1 · April 29th, 2008, 09:59 PM

Beautiful car!

460brevill · April 30th, 2008, 08:20 AM

very nice.....!!!!

wild001 · May 10th, 2008, 12:01 PM

Sweet ride!

Congrats!

Kobra Killer · May 10th, 2008, 11:58 PM

FWIW 427 is a big block. I would go for a 460 w/ a C6 auto

Grabber523 · May 11th, 2008, 10:29 AM

Originally Posted by Kobra Killer

FWIW 427 is a big block. I would go for a 460 w/ a C6 auto

A 351W bored and stroked out to 427 is still a small block...Still gotta get those pics taken and posted...

Grabber523 · May 11th, 2008, 08:21 PM

Due to a lack of good (above freezing) weather, the photos took a little longer than planned...this is the 2nd nice day we've had all spring.

Here you go:

Had to throw a couple of my other baby in there. As you can see it needs a little work, but it runs and drives...starts the first time every time. Just can't take it out in the rain cuz the windows don't roll up yet!

April 15th, 2008, 10:02 AM	#1
Grabber523 Hardcore Enthusiast 2007 Mustang GT Join Date: Mar 2007 Location: Northwood, ND...yes, hell does freeze over... Posts: 998	Got a 69! I purchased a 69 Mustang Grande for $2500 this weekend, got big plans to restomod. The body's pretty clean and the original 302 and tranny combo run strong but aren't staying in it. It needs a full interior and pretty much completely re-wired, but I can do most of the work myself. I have a small-block 427 picked out already, looking to do an auto to 5 or 6-speed manual swap. If you guys have any good restoration websites (I already have a ton of stuff I'll be getting from ebay and Year One), pointers or suggestions to find little stuff like trim, walnut wood grain pieces, knobs, switches, wiring harnesses, manual tranny clutch pedal brackets, full A/C systems, 4-corner coil-over conversions, etc, it would be appreciated. Also, I don't know if they make a set of seat rails that will bolt up to a set of 2005+ seats. Anyone seen anything like this? Sorry for such a long post, I'm just real excited. Pics will be posted as soon as I can...no photobucket access at work. __________________ myspace.com/grabber523 2007 Grabber Orange GT Premium 5-Speed, CDC Sequential Taillights, 2.6L Kenne Bell, 3.73 FRPP Gears, Steeda Tri-Ax, Dynotech Alum. D/S, BMR D/S Loop

April 15th, 2008, 01:52 PM	#2
95blackbeauty Enthusiast 95 5.0 too slow Join Date: Mar 2007 Location: Athens, TX Posts: 804	When I re did my 65...it was junk yard mania for me. just trolling around trying to find little pieces. __________________ 95 gt H.O. Udp's, Pypes O/r X, Slp LMI's,CAI, 3.73 gears, C&L 76mm MAF, ,short throw, Back Seat Delete NOW SELLING BACK SEAT DELETE KITS (94-98)!!! pm me if interested

April 15th, 2008, 09:48 PM	#5
Grabber523 Hardcore Enthusiast 2007 Mustang GT Join Date: Mar 2007 Location: Northwood, ND...yes, hell does freeze over... Posts: 998	This is the only one I got so far...still have to go pick it up. Should have more up tomorow, especially of the interior (or lack thereof). __________________ myspace.com/grabber523 2007 Grabber Orange GT Premium 5-Speed, CDC Sequential Taillights, 2.6L Kenne Bell, 3.73 FRPP Gears, Steeda Tri-Ax, Dynotech Alum. D/S, BMR D/S Loop

April 30th, 2008, 08:20 AM	#9
460brevill Enthusiast Join Date: Apr 2007 Location: Farmville VA Posts: 782	very nice.....!!!! __________________ i sixing 200 six with 300 hp.

May 10th, 2008, 11:58 PM	#11
Kobra Killer Regular Join Date: Sep 2006 Location: Arvada, CO Posts: 98	FWIW 427 is a big block. I would go for a 460 w/ a C6 auto __________________ Clevelands Rule https://home.comcast.net/~jimmiephil...er_project.htm

April 15th, 2008, 05:48 PM	#4
nba1341 Banned 1965 Mustang Fastback Join Date: Apr 2007 Location: Los Angeles, Cal Posts: 24,982 Posts: 2,193	pictures

April 23rd, 2008, 08:04 PM	#6
sneakygt91 Newbie 1966 Mustang Join Date: Apr 2008 Location: Mechanicsville, VA Posts: 22	very nice...get some more pics up.

April 29th, 2008, 08:24 PM	#7
slapwig Newbie Join Date: Feb 2008 Posts: 2	That's really nice. You paid less money for nicer car than my piece of crap...good luck on the build

May 10th, 2008, 12:01 PM	#10
wild001 Newbie Join Date: May 2008 Posts: 10	Sweet ride! Congrats!

May 11th, 2008, 08:21 PM	#13
Grabber523 Hardcore Enthusiast 2007 Mustang GT Join Date: Mar 2007 Location: Northwood, ND...yes, hell does freeze over... Posts: 998	Due to a lack of good (above freezing) weather, the photos took a little longer than planned...this is the 2nd nice day we've had all spring. Here you go: Had to throw a couple of my other baby in there. As you can see it needs a little work, but it runs and drives...starts the first time every time. Just can't take it out in the rain cuz the windows don't roll up yet! __________________ myspace.com/grabber523 2007 Grabber Orange GT Premium 5-Speed, CDC Sequential Taillights, 2.6L Kenne Bell, 3.73 FRPP Gears, Steeda Tri-Ax, Dynotech Alum. D/S, BMR D/S Loop

All times are GMT -4. The time now is 05:47 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.