Broken again

69fastback · April 25th, 2008, 09:14 AM

I just landed from a trip, and I was playing around leaving the airport. I jumped on it from about a 2mph roll, and it made a loud bang and jumped out of gear. I put it back and gear, and it seemed to be fine, but I noticed an unusual rumble going down the highway. When I pulled up to the stop light I thought I heard something. When I engaged the clutch to take off, I heard a slight banging noise that sounded like it was coming from the rear. It sounded like a u-joint.

I pulled into a parking lot to check it out, and the u joints look fine, so I got back in and everytime I take off, or let off the gas while I moving, it makes the noise. When I got on the highway it has a rumble that seems like it's coming from the rear, and it has a slight vibration associated with it. I limped it home, and I guess I'll take a look at it this weekend.

Katen · April 25th, 2008, 12:31 PM

bad news man. sorry to hear bout your trouble man keep us up updated on what is up with it

69fastback · April 26th, 2008, 12:43 AM

I think it's the transmission

460brevill · April 26th, 2008, 09:30 AM

did you jack up the rear and turn the drive shaft both while looking at the u joints?

69fastback · April 26th, 2008, 12:11 PM

No, I'm afraid to go out and look at it.

I haven't actually checked it yet. I just don't think that it jumping out of gear can break a u joint. I'm just assuming it's going to be the transmission. The symptoms act like a u joint, so that's what I'm checking first, but I don't have my hopes up for that

.

zers · April 26th, 2008, 12:37 PM

I am crying irlz, I hope it's nothing serious. What transmission are you using, top loader?

69fastback · April 26th, 2008, 01:02 PM

Yeah, top loader.

I can't get the damn driveshaft out. The slip yoke is stuck on the output shaft. When I say stuck, I mean I about pulled the car off the jackstands when pulling on the driveshaft. Any ideas?

69fastback · April 26th, 2008, 01:47 PM

IIt took some help form a buddy, but I got it off..Looks like the raw horsepower of the 351W was too much for that u joint I put in about 3 months ago. One of the caps is in about 6 pieces.t took some help form a buddy, but I got it off..Looks like the raw horsepower of the 351W was too much for that u joint I put in about 3 months ago. One of the caps is in about 6 pieces.

HMUSN · April 26th, 2008, 01:50 PM

as least it's and easy fix (as least it's and easy fix)

69fastback · April 26th, 2008, 02:35 PM

Originally Posted by HMUSN

as least it's and easy fix (as least it's and easy fix)

lol...at first I was like WTF???? Then I realized why you typed it like that. I post on a few forumns, so I cut and pasted it, and I mist have done it twice

HMUSN · April 26th, 2008, 02:39 PM

nba1341 · April 26th, 2008, 04:20 PM

Originally Posted by 69fastback

IIt took some help form a buddy, but I got it off..Looks like the raw horsepower of the 351W was too much for that u joint I put in about 3 months ago. One of the caps is in about 6 pieces.t took some help form a buddy, but I got it off..Looks like the raw horsepower of the 351W was too much for that u joint I put in about 3 months ago. One of the caps is in about 6 pieces.

thats wierd either this is 2 posts in 1 or you have short term memory

69fastback · April 26th, 2008, 05:01 PM

Originally Posted by nba1341

thats wierd either this is 2 posts in 1 or you have short term memory

Originally Posted by 69fastback

lol...at first I was like WTF???? Then I realized why you typed it like that. I post on a few forumns, so I cut and pasted it, and I mist have done it twice

460brevill · April 26th, 2008, 07:18 PM

dont worry about double post and put a bruteforce joint in that thang.

zers · April 26th, 2008, 08:06 PM

yea, hooray for it being an easy fix =) and not being transmission

MustangOne · April 29th, 2008, 10:05 AM

Hey, Now when you do the rebuild of the 351, We could now start dreaming of the TKO 5 Speed. With out having to just need 1.

April 25th, 2008, 09:14 AM	#1
69fastback Enthusiast 1969 Mustang Mach 1 OLDNSLO Join Date: Aug 2006 Location: Oklahoma jackass, get to driving Posts: 634	Broken again I just landed from a trip, and I was playing around leaving the airport. I jumped on it from about a 2mph roll, and it made a loud bang and jumped out of gear. I put it back and gear, and it seemed to be fine, but I noticed an unusual rumble going down the highway. When I pulled up to the stop light I thought I heard something. When I engaged the clutch to take off, I heard a slight banging noise that sounded like it was coming from the rear. It sounded like a u-joint. I pulled into a parking lot to check it out, and the u joints look fine, so I got back in and everytime I take off, or let off the gas while I moving, it makes the noise. When I got on the highway it has a rumble that seems like it's coming from the rear, and it has a slight vibration associated with it. I limped it home, and I guess I'll take a look at it this weekend. __________________ New ride http://www.superior-motorsports.com/...aig/craig.html Old ride http://www.superior-motorsports.com/...g/mustang.html old rides engine in new home http://videos.streetfire.net/video/4...285480b970.htm

April 26th, 2008, 12:43 AM	#3
69fastback Enthusiast 1969 Mustang Mach 1 OLDNSLO Join Date: Aug 2006 Location: Oklahoma jackass, get to driving Posts: 634	I think it's the transmission __________________ New ride http://www.superior-motorsports.com/...aig/craig.html Old ride http://www.superior-motorsports.com/...g/mustang.html old rides engine in new home http://videos.streetfire.net/video/4...285480b970.htm

April 26th, 2008, 09:30 AM	#4
460brevill Enthusiast Join Date: Apr 2007 Location: Farmville VA Posts: 825	did you jack up the rear and turn the drive shaft both while looking at the u joints? __________________ i sixing 200 six with 300 hp.

April 26th, 2008, 12:11 PM	#5
69fastback Enthusiast 1969 Mustang Mach 1 OLDNSLO Join Date: Aug 2006 Location: Oklahoma jackass, get to driving Posts: 634	No, I'm afraid to go out and look at it. I haven't actually checked it yet. I just don't think that it jumping out of gear can break a u joint. I'm just assuming it's going to be the transmission. The symptoms act like a u joint, so that's what I'm checking first, but I don't have my hopes up for that . __________________ New ride http://www.superior-motorsports.com/...aig/craig.html Old ride http://www.superior-motorsports.com/...g/mustang.html old rides engine in new home http://videos.streetfire.net/video/4...285480b970.htm

April 26th, 2008, 12:37 PM	#6
zers Regular 1965 Coupe Join Date: Oct 2007 Location: Oregon Posts: 304	I am crying irlz, I hope it's nothing serious. What transmission are you using, top loader? __________________

April 25th, 2008, 12:31 PM	#2
Katen Regular 1973 Coupe Mustang pft if i know Join Date: Jan 2007 Location: Defiance, Ohio Posts: 102	bad news man. sorry to hear bout your trouble man keep us up updated on what is up with it

April 26th, 2008, 01:02 PM	#7
69fastback Enthusiast 1969 Mustang Mach 1 OLDNSLO Join Date: Aug 2006 Location: Oklahoma jackass, get to driving Posts: 634	Yeah, top loader. I can't get the damn driveshaft out. The slip yoke is stuck on the output shaft. When I say stuck, I mean I about pulled the car off the jackstands when pulling on the driveshaft. Any ideas? __________________ New ride http://www.superior-motorsports.com/...aig/craig.html Old ride http://www.superior-motorsports.com/...g/mustang.html old rides engine in new home http://videos.streetfire.net/video/4...285480b970.htm

April 26th, 2008, 01:47 PM	#8
69fastback Enthusiast 1969 Mustang Mach 1 OLDNSLO Join Date: Aug 2006 Location: Oklahoma jackass, get to driving Posts: 634	IIt took some help form a buddy, but I got it off..Looks like the raw horsepower of the 351W was too much for that u joint I put in about 3 months ago. One of the caps is in about 6 pieces.t took some help form a buddy, but I got it off..Looks like the raw horsepower of the 351W was too much for that u joint I put in about 3 months ago. One of the caps is in about 6 pieces. __________________ New ride http://www.superior-motorsports.com/...aig/craig.html Old ride http://www.superior-motorsports.com/...g/mustang.html old rides engine in new home http://videos.streetfire.net/video/4...285480b970.htm

April 26th, 2008, 07:18 PM	#14
460brevill Enthusiast Join Date: Apr 2007 Location: Farmville VA Posts: 825	dont worry about double post and put a bruteforce joint in that thang. __________________ i sixing 200 six with 300 hp.

April 26th, 2008, 08:06 PM	#15
zers Regular 1965 Coupe Join Date: Oct 2007 Location: Oregon Posts: 304	yea, hooray for it being an easy fix =) and not being transmission __________________

April 29th, 2008, 10:05 AM	#16
MustangOne Regular 1968 GT 500 Super Snake 12.6 @ 114.3 Join Date: Mar 2008 Location: Sapulpa Oklahoma Posts: 429	Hey, Now when you do the rebuild of the 351, We could now start dreaming of the TKO 5 Speed. With out having to just need 1. __________________ www.Mustang1.Com

Threads Similar to: Broken again
Thread	Thread Starter	Forum	Replies	Last Post
broken bolt !!!!!!!!	armymike63b	4V / SVT	4	March 10th, 2008 11:05 PM
Broken Horn	RavensChild	V6 Mustangs	16	February 19th, 2008 05:41 PM
Broken 360	DarkSidejoker	The Clubhouse	7	February 18th, 2008 11:11 AM
My car got broken into	Phoenixx	The Clubhouse	21	January 18th, 2008 12:57 PM
it's broken......	Twist 2 Go	The Clubhouse	15	October 17th, 2005 12:02 AM

All times are GMT -4. The time now is 05:41 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.