Would A 4.6l 3v Dohc Fit In A 67 Fastback

mustanglover67 · June 8th, 2008, 06:12 PM

I've seen engines like 390s and 351s but ive wondered if the new 3V would fit in a 67. Any ideas?

MustangOne · June 8th, 2008, 06:21 PM

Yes, YES It Will.

Here is what we have. Works and runs Great ! ! !

Our Next on is coming on the September, It will have a 5.4 Blown 2008 Cobra motor.

MustangOne · June 8th, 2008, 06:23 PM

Here is our 351W to a 427 Stroker.

460brevill · June 8th, 2008, 08:32 PM

purdy purdy purdy!!!!!!!!!!!!!!

Vinyl66 · June 8th, 2008, 08:51 PM

daaaaaaaaaaammmmnn *jawdrop*

mustanglover67 · June 8th, 2008, 10:58 PM

DUDE insane!! What mods and supercharger kenne bell? (mustangone)

mustanglover67 · June 8th, 2008, 11:55 PM

I've got a couple questions about the engine. does it fit under the hood cause i dont see one. What kind of exhaust or more specifically what kind of headers do u have? Is that a newer radiator or an older one? R those stock motor mounts or r they after market if so what kind. What transmission do u have and do u think a Tremec TKO500 would work with this? Did u have to sacrifice any suspension parts to make the engine fit? Do u have any problems with the steering shafts or did u? Thank you in advance im sure i will have more questions in the future.

MustangOne · June 9th, 2008, 10:29 AM

Here is a Link to all my Photos.
Yes that one is a Kenny Bell, Can get up to 28lb of boost. On the New Python 5.4 we are using a 3.4 wipple, it can get us 31 lb of boost.

Hope these photos help you. On the hood we remade it. We added a 2" Lift on it
You can Alway pm me or Call. Anything I can do to help.
Good Luck

mustanglover67 · June 9th, 2008, 10:36 PM

looks badass. I wanted 2 put a 67 shelby hood on it not like urs but thnx about the 2in lift

ReverendDexter · June 9th, 2008, 11:17 PM

Not to nitpick, but a 3v is a SOHC.

Devilman · June 15th, 2008, 08:45 AM

Where is the link t the photos? We have a 67 and a 4V DOHC available, anyway nice damn car...

thewayshemoves · June 21st, 2008, 07:51 PM

seriously, I never browse over to the classic section, even though a classic stang is my dreamcar. Those cars are gorgeous. One day, haha.

06RedfireGT · June 21st, 2008, 09:45 PM

^To go along with your avie

But those are gorgeous cars MustangOne.

HMStang217 · June 21st, 2008, 10:58 PM

Has anyone tried prying a 4 valve dohc into a tiny ford falcon?? thats what im really hoping to do if its possible im doing it just wondered if anyone else has....im talking 62 so its the the really tight engine bay

MustangOne · June 22nd, 2008, 12:54 AM

All you have to do is use the Mustang II Front end set up. Remove the shock towers.

MustangOne · June 22nd, 2008, 12:58 AM

The Big Photos are the Link to the my Photobucket

Thank you Guyz...

Devilman · June 22nd, 2008, 01:02 PM

What tranny and rear end are you using? thanks for the post.....

MustangOne · June 22nd, 2008, 02:18 PM

The Tranny is a TKO T-56. And the Rear End is a Total Control’s second generation g-Bar and g-Link systems

June 8th, 2008, 06:12 PM	#1
mustanglover67 Newbie Join Date: Apr 2008 Location: Fountain Valley California Posts: 18 iTrader: 0 reviews	Would A 4.6l 3v Dohc Fit In A 67 Fastback I've seen engines like 390s and 351s but ive wondered if the new 3V would fit in a 67. Any ideas?

June 8th, 2008, 06:21 PM	#2
MustangOne Lost in the 60's 1968 GT 500 Super Snake 12.6 @ 114.3 Join Date: Mar 2008 Location: Sapulpa Oklahoma Posts: 2,053 iTrader: 0 reviews	Yes, YES It Will. Here is what we have. Works and runs Great ! ! ! Our Next on is coming on the September, It will have a 5.4 Blown 2008 Cobra motor. __________________ MustangOne's Car's How to post Photos in Your Thread. Vote for your Favorite Ride of the month, Every Month Modded Mustangs Facebook Last edited by MustangOne; June 8th, 2008 at 06:25 PM.

June 8th, 2008, 06:23 PM	#3
MustangOne Lost in the 60's 1968 GT 500 Super Snake 12.6 @ 114.3 Join Date: Mar 2008 Location: Sapulpa Oklahoma Posts: 2,053 iTrader: 0 reviews	Here is our 351W to a 427 Stroker. __________________ MustangOne's Car's How to post Photos in Your Thread. Vote for your Favorite Ride of the month, Every Month Modded Mustangs Facebook

June 8th, 2008, 08:32 PM	#4
460brevill Hardcore Enthusiast Join Date: Apr 2007 Location: Farmville VA Posts: 1,327 iTrader: 0 reviews	purdy purdy purdy!!!!!!!!!!!!!! __________________ i sixing 200 six with 300 hp.

June 8th, 2008, 08:51 PM	#5
Vinyl66 Anatidaephobic 1966 Vinyl Mustang 2012 Hyundai Elantra GLS Join Date: Sep 2007 Posts: 2,352 iTrader: 0 reviews	daaaaaaaaaaammmmnn jawdrop __________________ Pittsburgh Steelers/Penguins/Pirates FTMFW!!!!!

June 8th, 2008, 10:58 PM	#6
mustanglover67 Newbie Join Date: Apr 2008 Location: Fountain Valley California Posts: 18 iTrader: 0 reviews	DUDE insane!! What mods and supercharger kenne bell? (mustangone)

June 8th, 2008, 11:55 PM	#7
mustanglover67 Newbie Join Date: Apr 2008 Location: Fountain Valley California Posts: 18 iTrader: 0 reviews	I've got a couple questions about the engine. does it fit under the hood cause i dont see one. What kind of exhaust or more specifically what kind of headers do u have? Is that a newer radiator or an older one? R those stock motor mounts or r they after market if so what kind. What transmission do u have and do u think a Tremec TKO500 would work with this? Did u have to sacrifice any suspension parts to make the engine fit? Do u have any problems with the steering shafts or did u? Thank you in advance im sure i will have more questions in the future.

June 9th, 2008, 10:29 AM	#8
MustangOne Lost in the 60's 1968 GT 500 Super Snake 12.6 @ 114.3 Join Date: Mar 2008 Location: Sapulpa Oklahoma Posts: 2,053 iTrader: 0 reviews	Here is a Link to all my Photos. Yes that one is a Kenny Bell, Can get up to 28lb of boost. On the New Python 5.4 we are using a 3.4 wipple, it can get us 31 lb of boost. Hope these photos help you. On the hood we remade it. We added a 2" Lift on it You can Alway pm me or Call. Anything I can do to help. Good Luck __________________ MustangOne's Car's How to post Photos in Your Thread. Vote for your Favorite Ride of the month, Every Month Modded Mustangs Facebook Last edited by MustangOne; June 9th, 2008 at 10:35 AM.

June 9th, 2008, 10:36 PM	#9
mustanglover67 Newbie Join Date: Apr 2008 Location: Fountain Valley California Posts: 18 iTrader: 0 reviews	looks badass. I wanted 2 put a 67 shelby hood on it not like urs but thnx about the 2in lift

June 9th, 2008, 11:17 PM	#10
ReverendDexter Priest of the Car Gods Clapped-out '90 GT 'vert ~5.5 seconds off TTOD :( Join Date: Jan 2007 Location: Rohnert Park, CA Posts: 13,808 iTrader: 0 reviews	Not to nitpick, but a 3v is a SOHC. __________________ O o /¯/______________________ \|BLAAAAAAAAAAAAAAAAAAAAAAAAARGH!!! \_\

June 15th, 2008, 08:45 AM	#11
Devilman Regular 1985 GT 13.01@105.10 Join Date: May 2007 Location: Brandon, FL Posts: 210 iTrader: 1 reviews	Where is the link t the photos? We have a 67 and a 4V DOHC available, anyway nice damn car... __________________ "Pain will always be there, misery is optional....."

June 21st, 2008, 09:45 PM	#13
06RedfireGT One Man Wolf Pack 2006 Mustang GT 13ish....maybe Join Date: Aug 2006 Location: Regulatin On Some OGs Posts: 22,492 iTrader: 2 reviews	^To go along with your avie But those are gorgeous cars MustangOne. __________________ ΜΟΛΩΝ ΛΑΒΕ

June 21st, 2008, 10:58 PM	#14
HMStang217 Regular Join Date: Sep 2007 Posts: 156 iTrader: 1 reviews	Has anyone tried prying a 4 valve dohc into a tiny ford falcon?? thats what im really hoping to do if its possible im doing it just wondered if anyone else has....im talking 62 so its the the really tight engine bay __________________ 1996 Mustang Gt (ongoing project) -Spec Stage 1 Clutch -Mac Prochamber Midpipe

June 22nd, 2008, 12:54 AM	#15
MustangOne Lost in the 60's 1968 GT 500 Super Snake 12.6 @ 114.3 Join Date: Mar 2008 Location: Sapulpa Oklahoma Posts: 2,053 iTrader: 0 reviews	All you have to do is use the Mustang II Front end set up. Remove the shock towers. __________________ MustangOne's Car's How to post Photos in Your Thread. Vote for your Favorite Ride of the month, Every Month Modded Mustangs Facebook

June 22nd, 2008, 12:58 AM	#16
MustangOne Lost in the 60's 1968 GT 500 Super Snake 12.6 @ 114.3 Join Date: Mar 2008 Location: Sapulpa Oklahoma Posts: 2,053 iTrader: 0 reviews	The Big Photos are the Link to the my Photobucket Thank you Guyz... __________________ MustangOne's Car's How to post Photos in Your Thread. Vote for your Favorite Ride of the month, Every Month Modded Mustangs Facebook

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

June 22nd, 2008, 01:02 PM	#17
Devilman Regular 1985 GT 13.01@105.10 Join Date: May 2007 Location: Brandon, FL Posts: 210 iTrader: 1 reviews	What tranny and rear end are you using? thanks for the post..... __________________ "Pain will always be there, misery is optional....."

June 22nd, 2008, 02:18 PM	#18
MustangOne Lost in the 60's 1968 GT 500 Super Snake 12.6 @ 114.3 Join Date: Mar 2008 Location: Sapulpa Oklahoma Posts: 2,053 iTrader: 0 reviews	The Tranny is a TKO T-56. And the Rear End is a Total Control’s second generation g-Bar and g-Link systems __________________ MustangOne's Car's How to post Photos in Your Thread. Vote for your Favorite Ride of the month, Every Month Modded Mustangs Facebook

Threads Similar to: Would A 4.6l 3v Dohc Fit In A 67 Fastback
Thread	Thread Starter	Forum	Replies	Last Post
What is better for the Street? 4.6 DOHC, 4.6 DOHC SC or 5.4 Lightning SC	Steele6599	99-04	61	May 15th, 2008 11:22 AM
69 Fastback	Dustin Maczuk	Classic Mustangs	3	November 19th, 2007 08:44 AM
64 1/2 FASTBACK	dragracer404	Classic Mustangs	15	September 5th, 2007 09:48 AM
66 fastback	gooberhead320	The Clubhouse	34	July 17th, 2007 01:19 AM
17 inch wheels on a 69' Mustang Fastback - Correct Fit	jademonkeystang	Classic Mustangs	0	May 20th, 2007 10:13 PM

All times are GMT -4. The time now is 09:34 PM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.