| Home | Register | FAQ | Members List | Calendar | Blogs | Garage | Gallery | Search | Today's Posts | Mark Forums Read |
| | |||||||||||
| ||||||||||||
|
|||||||
Discussing flexplate & transmission questions in the Classic Mustangs Forum. I have a 66 Mustang with an I6 that I'm going to do the ... Modded Mustangs is the premier Ford Mustang Forum on the internet. We discuss all aspects of the Ford Mustang on the forum. Registered Users do not see the above ads. Please Register - It's Free! |
|
|
LinkBack | Thread Tools |
June 25th, 2008, 12:43 PM
|
#1 |
|
Newbie
Join Date: Jun 2008
Posts: 2
|
flexplate & transmission questions
I have a 66 Mustang with an I6 that I'm going to do the V8 swap. I had a guy rebuild me a 302 that I believe is a 1978 block with the 28oz Harmonic balancer. It does not have a flexplate on the back and he also threw in a used v8 model C4 transmission.
The model number for the block is D8OE 6015 E3A and the balancer number is D62E-6316-A2A. The model number on the Transmission is DAOP 7006 AA. I couldn't find any information on the transmission, so I don't know what year model or anything about it. He also left the torque converter in it. What I need to know is what flexplate should I use and will this transmission work with the engine as is, or do I need to buy a new bellhousing/torque converter. Also, will the flexplate/bellhousing on my I6 C4 work with the new V8? Thanks in advance Don |
| Sponsored Links | Remove Advertisements |
| Forums at Modded Mustangs Advertisement |
|
|
June 25th, 2008, 01:48 PM
|
#2 |
|
Enthusiast
Join Date: Apr 2007
Location: Farmville VA
Posts: 879
|
bell willnot work.trans may bolt to v/8 bell.
__________________
i sixing 200 six with 300 hp. |
|
June 25th, 2008, 09:28 PM
|
#3 |
|
June 08 ROTM
1968 GT 500 Super Snake
12.6 @ 114.3
Join Date: Mar 2008
Location: Sapulpa Oklahoma
Posts: 515
|
The D8= 1978 the bell housing from that should be fine.
If the tran has been useing in the last 6 month and was stored inside the torque conv should be fine. The Flex plate you need to get this one from jegs. it is $76.99 
|
|
June 26th, 2008, 09:25 AM
|
#4 |
|
Enthusiast
Join Date: Apr 2007
Location: Farmville VA
Posts: 879
|
yes.if the 78 tranny had the bell on it.it will work,but the i6 bell want work.
__________________
i sixing 200 six with 300 hp. |
|
June 26th, 2008, 10:59 AM
|
#5 |
|
Newbie
Join Date: Jun 2008
Posts: 2
|
I pulled the transmission out into better light yesterday and the actual part number on the casing is D4OP 7006 AA. Does that mean the transmission was built in 1984?
|
|
June 26th, 2008, 11:23 AM
|
#6 |
|
June 08 ROTM
1968 GT 500 Super Snake
12.6 @ 114.3
Join Date: Mar 2008
Location: Sapulpa Oklahoma
Posts: 515
|
Ford Year Numbers as follows:
A4 = 1944 B4 = 1954 C4 = 1964 D4 = 1974 E4 = 1984 F4 = 1994 G4 = 2004 |
 |
| Thread Tools | |
|
|
Threads Similar to: flexplate & transmission questions
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| aod transmission questions | etony89 | 5.0 Mustangs | 1 | June 25th, 2008 05:59 PM |
| '95 SVT COBRA complete engine & transmission pullout | midnightvenom | Engine | 12 | February 23rd, 2008 12:14 PM |
| C-4 Flexplate | novamastr | 5.0 Mustangs | 10 | January 31st, 2008 03:03 PM |
| balancer&flexplate | Fastpitchdad | Want to Buy | 0 | February 21st, 2007 05:15 PM |
| Engine & Transmission Swap | big_stroke | 5.0 Mustangs | 3 | February 7th, 2007 02:28 AM |
