Carb / Intake Question

fordboy4rd · June 29th, 2008, 03:37 AM

Will edelbrock 1406 Carb fit any ford/chevy 4 barrel Edelbrock intake.. also will the 429 edelbrock intake fit a 351M Engine? Are the bolt patterns and everything the same or what?

Kobra Killer · June 29th, 2008, 05:18 AM

There are 2 basic mounting patterns for carbs.
The most common is the square-bore where centers of butterflies form a square.
These are most Holley and Edelbrock carbs
The other is spread-bore where primaries & secondary butterfly spacings are different.
Quadra-Jet carbs. There are adapters for either series if needed.
Not sure about 351M & 429 intakes, but I don't think they are the same.

MustangOne · June 29th, 2008, 01:47 PM

The 351C/400M Are smaller than the 429/460 Intakes.
They Look Alot alike, But are Smaller.

June 29th, 2008, 03:37 AM	#1
fordboy4rd Regular Join Date: Feb 2007 Posts: 114	Carb / Intake Question Will edelbrock 1406 Carb fit any ford/chevy 4 barrel Edelbrock intake.. also will the 429 edelbrock intake fit a 351M Engine? Are the bolt patterns and everything the same or what?

June 29th, 2008, 05:18 AM	#2
Kobra Killer Regular Join Date: Sep 2006 Location: Arvada, CO Posts: 122	There are 2 basic mounting patterns for carbs. The most common is the square-bore where centers of butterflies form a square. These are most Holley and Edelbrock carbs The other is spread-bore where primaries & secondary butterfly spacings are different. Quadra-Jet carbs. There are adapters for either series if needed. Not sure about 351M & 429 intakes, but I don't think they are the same. __________________ Clevelands Rule https://home.comcast.net/~jimmiephil...er_project.htm

June 29th, 2008, 01:47 PM	#3
MustangOne June 08 ROTM 1968 GT 500 Super Snake 12.6 @ 114.3 Join Date: Mar 2008 Location: Sapulpa Oklahoma Posts: 515	The 351C/400M Are smaller than the 429/460 Intakes. They Look Alot alike, But are Smaller. __________________ www.Mustang1.Com

Threads Similar to: Carb / Intake Question
Thread	Thread Starter	Forum	Replies	Last Post
carb swap wiring question	notchabovechevy	5.0 Mustangs	14	February 3rd, 2008 08:08 PM
carb setup question	86gt5liter	5.0 Mustangs	2	May 15th, 2007 06:16 PM
carb and intake	gregkelley	Trade	2	April 25th, 2007 01:15 AM
06 V6 Intake question	Ware	V6 Mustangs	15	March 21st, 2007 08:48 PM
New intake and carb	turp	Classic Mustangs	5	August 26th, 2006 01:10 PM

Sponsored Links	Remove Advertisements
Forums at Modded Mustangs Advertisement

All times are GMT -4. The time now is 08:48 PM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.