[707Stang]

namely the entire brake system? i found a parts car and yeah info?

[460brevill]

i have complete 76 granada on my 66.the monark is the same thing.should bolt up.

[MustangOne]

1969 disc brakes for $525


The kit includes everything needed to swap out your front drum brakes for OE type front disc brakes originally available on 68-73 Mustang. They are technically correct for 70-73 Mustang, but the 68-69 OE differed only in that their spindles have a smaller pin. This kit uses the larger "Boss" type pin used after 1969. Our spindles use the "Granada spec outer tie rod hole.

All new parts including high strength alloy steel spindles, a dust shield kit, caliper brackets, corrosion protected calipers, semi-metallic pads, brake hoses, hose brackets and attachment hardware, adjustable proportioning valve, residual pressure valve, master cylinder, master cylinder outlet adapter(s), an adjustable pushrod (manual brake applications), wheel bearings, wheel seals, caliper attachment hardware, wheel attachment hardware, dust caps, performance slotted rotors with bearing races pre installed, outer tie rods correct for your application, Grade 8 attachment bolts, red and blue thread locker, and caliper lube.

[bossman69]

Mustang one has found a dam good kit cause i paid $700 for my convertion kit and it was only stock parts so if you want disc brakes then i would jump on that.