new shop toys

99mustang232 · February 21st, 2006, 10:59 AM

2ton central hydraulics foldable shop crane

Maximum capacity: 2 ton
Ram capacity: 8 ton
Boom length: 42'' to 63-1/2''
Maximum height: 103-1/2''
Weight: 228 lbs.

$124.99

2ton capacity central hydraulics load leveler

Bracket body: 1/8'' thick steel plate
Handle dimensions: 1''W x 4-5/8'' x 5/16'' bar stock
Hanging block dimensions: 5-1/2''L x 1-1/2''W x 3/4'' steel plate
Chain size: 41''L x 3/8''
Tool weight: 14 lbs.

$21.99

picture of it folded up in my garage

drgnracin72 · February 21st, 2006, 12:35 PM

man that thing is nice!

ckthecerealkiller · February 22nd, 2006, 12:40 AM

Sweet, that will help a bit. :wink

Congrats!

Twist 2 Go · February 22nd, 2006, 08:45 AM

those are great. the folding ability is a good thing for small shops. the leveler also works good.

fakesaleen · February 22nd, 2006, 09:33 AM

where did you get that cherry picker so cheap??

Twist 2 Go · February 22nd, 2006, 10:01 AM

If I had to guess, Harbour Freight or Northern Hydraulics

99mustang232 · February 22nd, 2006, 12:15 PM

Originally Posted by Twist 2 Go

If I had to guess, Harbour Freight or Northern Hydraulics

yeh i got it from our local harbor freight shop off military hwy in norfolk, va they are running a sale on them until the end of the month they are normally $199 for the crane. here is their website... i go there for a lot of 1 time use tools or the cheaper stuff they also got a large tarp selection too.

http://www.harborfreight.com

vivoronte · February 22nd, 2006, 01:12 PM

I have the same lift man, folds up great for storage. The only problem i have with it is. The legs fold up backwards, and if your not carefull they can slam back done to the floor if its not level. Shit hurts man, hit by it a few times. Oh well good deal........bought mine off some dude for 100 fat ones.

Bossman351 · February 22nd, 2006, 01:33 PM

I tried to fix your pic for you but your link goes to an empty page.

Good find on the lift and leveler there 99.

L33T · February 22nd, 2006, 02:25 PM

Yeah it's a nice piece for sure.

99mustang232 · February 22nd, 2006, 02:48 PM

Originally Posted by L33T

Yeah it's a nice piece for sure.

btw, thanks for helping put it together!

Kevin · February 22nd, 2006, 03:34 PM

i've got that same lift, and the leveler looks similar also :wink

99mustang232 · February 23rd, 2006, 12:15 PM

nice so what have you guys pulled with them so far?

vivoronte · February 23rd, 2006, 05:22 PM

My Motor- Cobra 5.0
97- Grand am 3.0
97-subaru legacy gt
used it to do a trans job on a 93' escort

just 4 a can think of. put that shit to use tho.........i have 4 more motor jobs comin up next couple days

Twist 2 Go · February 23rd, 2006, 07:22 PM

I used one of those to install my 460 ,powerglide, and frt subframe into my stang at the same time. As for the legs falling back down, if you look on the bottom where the pins are, the 2 frt pins you pull so the leg will fold up are inserted back into 2 other holes to keep the legs upright.

99mustang232 · February 24th, 2006, 09:00 AM

sounds good, even with the pins in the bastard is still a little top heavy so you gotta be careful when moving it in collasped mode.

well this weekend i will probably pull a magnum 360, then might pull my 302 out of my truck, but will use it to pull my 3.8 for sure.

99mustang232 · March 1st, 2006, 10:57 PM

it works

i did end up getting some better chains

vivoronte · March 1st, 2006, 11:20 PM

Put that as my Background lol(jk).........its such a beautiful thing lol

99mustang232 · March 2nd, 2006, 08:31 AM

lol that's cool lotta work went into pullin that bitch, here is the rest of the project photo album so far if you wanna see more pics... about 117 so far

http://photobucket.com/albums/c181/9...ct_99dakotaRT/

vfast · March 7th, 2006, 12:34 PM

we have a HF here...alot of there stuff is made by a company that makes..snap on stuff..
blue point

February 21st, 2006, 10:59 AM	#1
99mustang232 MM Fanatic 1999 Ford Mustang V6 Join Date: Sep 2005 Location: newport news, va Posts: 3,719	new shop toys 2ton central hydraulics foldable shop crane Maximum capacity: 2 ton Ram capacity: 8 ton Boom length: 42'' to 63-1/2'' Maximum height: 103-1/2'' Weight: 228 lbs. $124.99 2ton capacity central hydraulics load leveler Bracket body: 1/8'' thick steel plate Handle dimensions: 1''W x 4-5/8'' x 5/16'' bar stock Hanging block dimensions: 5-1/2''L x 1-1/2''W x 3/4'' steel plate Chain size: 41''L x 3/8'' Tool weight: 14 lbs. $21.99 picture of it folded up in my garage

February 22nd, 2006, 08:45 AM	#4
Twist 2 Go Hardcore Enthusiast Join Date: Aug 2005 Location: Chesapeake, Virginia Posts: 1,716	those are great. the folding ability is a good thing for small shops. the leveler also works good. __________________ 88 Mustang Coupe 2006 FFW Richmond True Street Runner-Up www.rickscarcare.net http://img146.imageshack.us/img146/2158/ricksadql2.jpg

February 22nd, 2006, 09:33 AM	#5
fakesaleen Regular Join Date: Feb 2006 Location: Port Huron, MI. Posts: 376	where did you get that cherry picker so cheap?? __________________

February 22nd, 2006, 10:01 AM	#6
Twist 2 Go Hardcore Enthusiast Join Date: Aug 2005 Location: Chesapeake, Virginia Posts: 1,716	If I had to guess, Harbour Freight or Northern Hydraulics __________________ 88 Mustang Coupe 2006 FFW Richmond True Street Runner-Up www.rickscarcare.net http://img146.imageshack.us/img146/2158/ricksadql2.jpg

February 22nd, 2006, 01:33 PM	#9
Bossman351 Hardcore Enthusiast Join Date: Aug 2005 Location: On the trailer.......broke. Posts: 1,261	I tried to fix your pic for you but your link goes to an empty page. Good find on the lift and leveler there 99. __________________ http://www.moddedmustangs.com/forums...ic137.html.jpg

February 22nd, 2006, 12:40 AM	#3
ckthecerealkiller Enthusiast Join Date: Oct 2005 Location: Greeley Colorado with high rate of living an low wages baby! Posts: 935	Sweet, that will help a bit. :wink Congrats!

February 22nd, 2006, 02:25 PM	#10
L33T Enthusiast Join Date: Dec 2005 Location: Newport News, VA Posts: 732	Yeah it's a nice piece for sure.

February 22nd, 2006, 03:34 PM	#12
Kevin Regular Join Date: Aug 2005 Posts: 54	i've got that same lift, and the leveler looks similar also :wink

February 23rd, 2006, 12:15 PM	#13
99mustang232 MM Fanatic 1999 Ford Mustang V6 Join Date: Sep 2005 Location: newport news, va Posts: 3,719	nice so what have you guys pulled with them so far?

February 23rd, 2006, 05:22 PM	#14
vivoronte Regular Join Date: Jan 2006 Posts: 96	My Motor- Cobra 5.0 97- Grand am 3.0 97-subaru legacy gt used it to do a trans job on a 93' escort just 4 a can think of. put that shit to use tho.........i have 4 more motor jobs comin up next couple days

February 23rd, 2006, 07:22 PM	#15
Twist 2 Go Hardcore Enthusiast Join Date: Aug 2005 Location: Chesapeake, Virginia Posts: 1,716	I used one of those to install my 460 ,powerglide, and frt subframe into my stang at the same time. As for the legs falling back down, if you look on the bottom where the pins are, the 2 frt pins you pull so the leg will fold up are inserted back into 2 other holes to keep the legs upright. __________________ 88 Mustang Coupe 2006 FFW Richmond True Street Runner-Up www.rickscarcare.net http://img146.imageshack.us/img146/2158/ricksadql2.jpg

February 24th, 2006, 09:00 AM	#16
99mustang232 MM Fanatic 1999 Ford Mustang V6 Join Date: Sep 2005 Location: newport news, va Posts: 3,719	sounds good, even with the pins in the bastard is still a little top heavy so you gotta be careful when moving it in collasped mode. well this weekend i will probably pull a magnum 360, then might pull my 302 out of my truck, but will use it to pull my 3.8 for sure.

March 1st, 2006, 10:57 PM	#17
99mustang232 MM Fanatic 1999 Ford Mustang V6 Join Date: Sep 2005 Location: newport news, va Posts: 3,719	it works i did end up getting some better chains

March 1st, 2006, 11:20 PM	#18
vivoronte Regular Join Date: Jan 2006 Posts: 96	Put that as my Background lol(jk).........its such a beautiful thing lol

March 2nd, 2006, 08:31 AM	#19
99mustang232 MM Fanatic 1999 Ford Mustang V6 Join Date: Sep 2005 Location: newport news, va Posts: 3,719	lol that's cool lotta work went into pullin that bitch, here is the rest of the project photo album so far if you wanna see more pics... about 117 so far http://photobucket.com/albums/c181/9...ct_99dakotaRT/

Threads Similar to: new shop toys
Thread	Thread Starter	Forum	Replies	Last Post
toys 2	HMUSN	The Clubhouse	19	September 7th, 2007 05:22 PM
who likes old toys?	HMUSN	The Clubhouse	17	September 1st, 2007 12:29 AM
NEW TOYS!	Cricket	The Clubhouse	12	April 19th, 2007 09:24 AM
New toys	jagermiester	99-04	13	February 17th, 2007 10:48 AM
My New Toys	drgnracin72	The Clubhouse	15	October 14th, 2006 08:19 PM

All times are GMT -4. The time now is 05:53 AM.
Contact Us - Modded Mustangs - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2008, Jelsoft Ent. Ltd. & SEO by vBSEO 3.1.0 ©2007, Crawlability, Inc.

March 7th, 2006, 12:34 PM	#20
vfast Enthusiast Join Date: Aug 2005 Location: in my 2020 v-16 camaro Posts: 766	we have a HF here...alot of there stuff is made by a company that makes..snap on stuff.. blue point