So, my rotor locked up & I skidded all up in here

moond0ggie · January 31st, 2011, 01:22 AM

This is my new little work horse, an '08 DB9. I typically have it loaded up with a bunch of tools & building supplies I use to perform maintenance & repair on my Grandpa's ranch. I've had to drive it with the space-saver spare on the right rear since Tuesday when I had ran over a 1/2" x 7" lag screw. d'oh!

I'll admit, I am a little miffed at myself for the rips in the headliner, passenger seat & door panel & the 3 divots on the dash from haulin around fence posts & lumber. I must say though, shes been quite a trooper. Last week I had to haul around a 24' extension ladder on the roof but I put down a thick quilted moving blanket to protect the paint.

My Grandpa is always telling me I should use his truck (in background) but I don't want to beat the last bit of life out of his old pride & joy.
Bless his heart when he offered to pay for my new tire, I didn't have the heart to tell him he would have to sell his truck to afford one.

Rdot9 · January 31st, 2011, 01:26 AM

Rich J · January 31st, 2011, 01:26 AM

So what your saying is you haul lumber in a DB9? If so Jeremy Clarkson would definitely pull a Chuck Norris on you..... Just saying.

graystang01 · January 31st, 2011, 01:35 AM

NastyFX4 · January 31st, 2011, 01:41 AM

Dumb.

N29468 · January 31st, 2011, 01:47 AM

So much fail...

VinceS2K · January 31st, 2011, 01:58 AM

Genevieve! · January 31st, 2011, 02:54 AM

Originally Posted by graystang01

this sums it up pretty well for me.

Kohrs93 · January 31st, 2011, 03:13 AM

I think he nicknamed his truck in the back ground "Db9"

Nameless · January 31st, 2011, 07:49 AM

you still didn't tell us about how the rotor locked up and/or the results...

FAIL

MyLILPwNy! · January 31st, 2011, 08:05 AM

Quick pic I took of my new baby. Just got back from job at taco bell.

mmmm taco bell.

dr.gonzo! · January 31st, 2011, 08:17 AM

Originally Posted by MyLILPwNy

[IMGhttp://i298.photobucket.com/albums/mm252/rayhobart/2003_ferrari_enzo_03_m.jpg[/IMG]

Quick pic I took of my new baby. Just got back from job at taco bell.

mmmm taco bell.

I use that model for my landscaping company. The front holes are for the leaf blower but there is a winter attachment that can blow heated air and an optional snow plow attachment.

suprajay79 · January 31st, 2011, 09:01 AM

Originally Posted by MyLILPwNy

Quick pic I took of my new baby. Just got back from job at taco bell.

mmmm taco bell.

Originally Posted by dr.gonzo

I use that model for my landscaping company. The front holes are for the leaf blower but there is a winter attachment that can blow heated air and an optional snow plow attachment.

suprajay79 · January 31st, 2011, 09:03 AM

Originally Posted by moond0ggie

My Grandpa is always telling me I should use his truck (in background) but I don't want to beat the last bit of life out of his old pride & joy.
Bless his heart when he offered to pay for my new tire, I didn't have the heart to tell him he would have to sell his truck to afford one.

Save the truck! Screw the exotic car, let's make sure that truck keeps ticking!

1FastFox · January 31st, 2011, 09:22 AM

WTF? Not sure exactly what is going on here...

03SonicBoom · January 31st, 2011, 09:31 AM

I want to know how you get a 1/2"x7" lag bolt to puncture a tire. If it's laying down on the ground, it would be like running over a stick.

1FastFox · January 31st, 2011, 10:14 AM

Originally Posted by 03SonicBoom

I want to know how you get a 1/2"x7" lag bolt to puncture a tire. If it's laying down on the ground, it would be like running over a stick.

I dont know man. Back when I worked in a shop I used to find some goofy stuff inside a tire. One time I found an entire screw driver rolling around inside the tire...

January 31st, 2011, 01:22 AM	#1
moond0ggie Regular 1998 Mustang V6 5 spd. Join Date: Dec 2007 Location: Discovery Bay, Ca. Posts: 159 iTrader: 0 reviews	So, my rotor locked up & I skidded all up in here This is my new little work horse, an '08 DB9. I typically have it loaded up with a bunch of tools & building supplies I use to perform maintenance & repair on my Grandpa's ranch. I've had to drive it with the space-saver spare on the right rear since Tuesday when I had ran over a 1/2" x 7" lag screw. d'oh! I'll admit, I am a little miffed at myself for the rips in the headliner, passenger seat & door panel & the 3 divots on the dash from haulin around fence posts & lumber. I must say though, shes been quite a trooper. Last week I had to haul around a 24' extension ladder on the roof but I put down a thick quilted moving blanket to protect the paint. My Grandpa is always telling me I should use his truck (in background) but I don't want to beat the last bit of life out of his old pride & joy. Bless his heart when he offered to pay for my new tire, I didn't have the heart to tell him he would have to sell his truck to afford one.

January 31st, 2011, 01:26 AM	#3
Rich J I'm doing it wrong 04 Grand Cherokee Join Date: Mar 2010 Location: South Eastern, Mass Posts: 5,211 iTrader: 0 reviews	So what your saying is you haul lumber in a DB9? If so Jeremy Clarkson would definitely pull a Chuck Norris on you..... Just saying. __________________ Formerly known as Demon_54 "I feel the same way about disco as I do about herpes." - Hunter S. Thompson

January 31st, 2011, 01:41 AM	#5
NastyFX4 Made in U.S.A. 2011 F150 FX4 Join Date: Jan 2009 Location: Florida Posts: 16,010 iTrader: 9 reviews	Dumb. __________________

January 31st, 2011, 08:05 AM	#11
MyLILPwNy! Random Shemale Nudity FTW 2007 Mustang GT Join Date: Apr 2010 Location: Way to damn cold, CT Posts: 4,534 iTrader: 0 reviews	Quick pic I took of my new baby. Just got back from job at taco bell. mmmm taco bell. __________________ Somebody call for a really hairy plumber? Bow chicka bow wow! I came here to lay down some pipe. Bow chicka bow wow! So, I hear you have sisters. Bow chicka-who are twins-wow wow!

January 31st, 2011, 09:22 AM	#15
1FastFox Skirt Chasing Phallus Phondler Kit Car/Ducati/Explorer Nike Fast Join Date: Mar 2007 Location: Indiana Posts: 10,495 iTrader: 4 reviews	WTF? Not sure exactly what is going on here... __________________ QUOTE OF THE DAY (5/25/12): “Don’t play what’s there, play what’s not there.” ‐ Miles Davis

January 31st, 2011, 09:31 AM	#16
03SonicBoom Moderator 2003 Grand Cherokee Join Date: Jul 2008 Location: Indiana Posts: 6,621 iTrader: 0 reviews	I want to know how you get a 1/2"x7" lag bolt to puncture a tire. If it's laying down on the ground, it would be like running over a stick. __________________

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

LinkBacks (?) LinkBack to this Thread: http://www.moddedmustangs.com/forums/clubhouse/202091-so-my-rotor-locked-up-i-skidded-all-up-here.html
Posted By	For	Type	Date
Charlies New Intern: New Intern Mission Statement	This thread	Refback	March 11th, 2011 11:15 PM

Threads Similar to: So, my rotor locked up & I skidded all up in here
Thread	Thread Starter	Forum	Replies	Last Post
T-56 is locked out...	Smoothgrandmama	4V / SVT	18	July 30th, 2009 07:46 PM
well the last one was locked so..	MSO	The Clubhouse	18	October 2nd, 2007 03:07 PM

All times are GMT -4. The time now is 04:16 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.