Mobile Chassis Dyno Oct. 1 Mid Michigan

TooSlo86 · September 27th, 2011, 03:00 PM

Trying to round up interest in a mobile chassis dyno session. Ed of X&M Hot Rods is bringing his chassis dyno down to my place this Saturday. He will be charging $55 for 2 pulls or $65 for 3. I am located roughly in the center of Lansing, Saginaw, or Flint. If you have interest in this please contact me at nine eight nine five two five three two five six for further details. Thanks

Confirmed! Pulls start at noon.

TooSlo86 · September 29th, 2011, 05:31 PM

There's got to be some guys here in Mid Michigan that want to make some pulls!

AnotherS197GT · September 29th, 2011, 05:58 PM

If I wasn't broke and you were closer to Detroit

TooSlo86 · September 30th, 2011, 06:32 PM

That broke thing seems to be a common theme, not sure if it's $ or cars

Bring em out, they're calling for sun but cool.

AndrewsPony · September 30th, 2011, 06:45 PM

That is insane you are from Elsie sir! Didn't think I would find anyone that close, but now to burst the bubble.. I most defiantly would take my car out there if I wouldn't be embarrassed lol

TooSlo86 · September 30th, 2011, 08:45 PM

Originally Posted by AndrewsPony

That is insane you are from Elsie sir! Didn't think I would find anyone that close, but now to burst the bubble.. I most defiantly would take my car out there if I wouldn't be embarrassed lol

Well bring it on! Nothing to be embarrassed about, no-one here is going to judge! Hell 2 yrs ago when I broke the trans in the stang just before I had commited to run I ended up in front of 50 or more people (and there won't be any where near that here) on the dyno with my 72 C-10 with a STOCK Fuel Injected Vortec 305 that put a whole whopping 165hp to the wheels. If you are that close come on out. Head a mile north from Hoovers and you'll see us.

AndrewsPony · September 30th, 2011, 08:53 PM

I will try to find some time to try and come out if I can, my highschool homecoming is tomorrow so I might end up being a tad bit busy

TooSlo86 · October 3rd, 2011, 05:58 PM

Well we did it, we had our dyno party this past saturday. I got the FRPP roller rockers in and the FRPP driveshaft. In the end they were worth 8hp and 12lb/ft, this wasn't just at peak, with the pulls overlayed I picked up throughout the range. Granted this was done on different days but same dyno, same correction factor (SAE). So now the #'s are 317rwhp and 346rwtq. It was a great day, we had a total of 9 cars and trucks run, and man there were some cool ones! My poor little 302 was 2nd from the bottom as far as HP/TQ, but it was also the smallest engine on there too. I did get 2 good datalogs from the pulls also. No clue why I can't attach the dyno sheet, it's smaller than it needs to be.

bigstick · October 4th, 2011, 02:06 PM

Originally Posted by TooSlo86

Well we did it, we had our dyno party this past saturday. I got the FRPP roller rockers in and the FRPP driveshaft. In the end they were worth 8hp and 12lb/ft, this wasn't just at peak, with the pulls overlayed I picked up throughout the range. Granted this was done on different days but same dyno, same correction factor (SAE). So now the #'s are 317rwhp and 346rwtq. It was a great day, we had a total of 9 cars and trucks run, and man there were some cool ones! My poor little 302 was 2nd from the bottom as far as HP/TQ, but it was also the smallest engine on there too. I did get 2 good datalogs from the pulls also. No clue why I can't attach the dyno sheet, it's smaller than it needs to be.

Would you mind pm'ing me contact info for X&M Hot Rods?

We do airport drag racing up here (tri-city area) twice per year and I'd like to book him for May 2012 if he's interested.

Thanks!

TooSlo86 · October 4th, 2011, 05:05 PM

PM sent, but to put it out there for everyone, it's 989-430-9597. If I could ever figure out how to get the pictures to upload that would be great! They are below the requirements for attachments so.........

NastyFX4 · October 4th, 2011, 05:49 PM

Originally Posted by TooSlo86

PM sent, but to put it out there for everyone, it's 989-430-9597. If I could ever figure out how to get the pictures to upload that would be great! They are below the requirements for attachments so.........

Upload them to Photobucket and than post them is how you'll add photos.

September 27th, 2011, 03:00 PM	#1
TooSlo86 Newbie 1986 Mustang LX 12.29@111 Join Date: Aug 2010 Location: Elsie, Michigan Posts: 28 iTrader: 0 reviews	Mobile Chassis Dyno Oct. 1 Mid Michigan Trying to round up interest in a mobile chassis dyno session. Ed of X&M Hot Rods is bringing his chassis dyno down to my place this Saturday. He will be charging $55 for 2 pulls or $65 for 3. I am located roughly in the center of Lansing, Saginaw, or Flint. If you have interest in this please contact me at nine eight nine five two five three two five six for further details. Thanks Confirmed! Pulls start at noon. __________________ '86 LX, '97 Explorer bottom end & GT40Ps, AFM B-21, TFS v/s, retainers & pushrods, Pro Products upper/lower, 70MM TB, & EGR, 03-04 MAF, BBK 1515's, A9L, Moates QHTuner, FRPP 4.30, HD Z-code 12.29@111mph Mid Michigan Motorplex 4-22-12 Last edited by TooSlo86; September 28th, 2011 at 11:18 AM. Reason: Confirmed Will be taking place Starting at NOON

September 29th, 2011, 05:31 PM	#2
TooSlo86 Newbie 1986 Mustang LX 12.29@111 Join Date: Aug 2010 Location: Elsie, Michigan Posts: 28 iTrader: 0 reviews	There's got to be some guys here in Mid Michigan that want to make some pulls! __________________ '86 LX, '97 Explorer bottom end & GT40Ps, AFM B-21, TFS v/s, retainers & pushrods, Pro Products upper/lower, 70MM TB, & EGR, 03-04 MAF, BBK 1515's, A9L, Moates QHTuner, FRPP 4.30, HD Z-code 12.29@111mph Mid Michigan Motorplex 4-22-12

September 30th, 2011, 06:32 PM	#4
TooSlo86 Newbie 1986 Mustang LX 12.29@111 Join Date: Aug 2010 Location: Elsie, Michigan Posts: 28 iTrader: 0 reviews	That broke thing seems to be a common theme, not sure if it's $ or cars Bring em out, they're calling for sun but cool. __________________ '86 LX, '97 Explorer bottom end & GT40Ps, AFM B-21, TFS v/s, retainers & pushrods, Pro Products upper/lower, 70MM TB, & EGR, 03-04 MAF, BBK 1515's, A9L, Moates QHTuner, FRPP 4.30, HD Z-code 12.29@111mph Mid Michigan Motorplex 4-22-12

October 3rd, 2011, 05:58 PM	#8
TooSlo86 Newbie 1986 Mustang LX 12.29@111 Join Date: Aug 2010 Location: Elsie, Michigan Posts: 28 iTrader: 0 reviews	Well we did it, we had our dyno party this past saturday. I got the FRPP roller rockers in and the FRPP driveshaft. In the end they were worth 8hp and 12lb/ft, this wasn't just at peak, with the pulls overlayed I picked up throughout the range. Granted this was done on different days but same dyno, same correction factor (SAE). So now the #'s are 317rwhp and 346rwtq. It was a great day, we had a total of 9 cars and trucks run, and man there were some cool ones! My poor little 302 was 2nd from the bottom as far as HP/TQ, but it was also the smallest engine on there too. I did get 2 good datalogs from the pulls also. No clue why I can't attach the dyno sheet, it's smaller than it needs to be. __________________ '86 LX, '97 Explorer bottom end & GT40Ps, AFM B-21, TFS v/s, retainers & pushrods, Pro Products upper/lower, 70MM TB, & EGR, 03-04 MAF, BBK 1515's, A9L, Moates QHTuner, FRPP 4.30, HD Z-code 12.29@111mph Mid Michigan Motorplex 4-22-12

October 4th, 2011, 05:05 PM	#10
TooSlo86 Newbie 1986 Mustang LX 12.29@111 Join Date: Aug 2010 Location: Elsie, Michigan Posts: 28 iTrader: 0 reviews	PM sent, but to put it out there for everyone, it's 989-430-9597. If I could ever figure out how to get the pictures to upload that would be great! They are below the requirements for attachments so......... __________________ '86 LX, '97 Explorer bottom end & GT40Ps, AFM B-21, TFS v/s, retainers & pushrods, Pro Products upper/lower, 70MM TB, & EGR, 03-04 MAF, BBK 1515's, A9L, Moates QHTuner, FRPP 4.30, HD Z-code 12.29@111mph Mid Michigan Motorplex 4-22-12

September 29th, 2011, 05:58 PM	#3
AnotherS197GT I Post Entirely Way Too Much 2008 Mustang GT Join Date: Jul 2010 Location: Dearborn, MI Posts: 5,872 iTrader: 6 reviews	If I wasn't broke and you were closer to Detroit

September 30th, 2011, 06:45 PM	#5
AndrewsPony Regular 2001 V6 Mustang Join Date: Aug 2010 Location: Michigan Posts: 125 iTrader: 1 reviews	That is insane you are from Elsie sir! Didn't think I would find anyone that close, but now to burst the bubble.. I most defiantly would take my car out there if I wouldn't be embarrassed lol

September 30th, 2011, 08:53 PM	#7
AndrewsPony Regular 2001 V6 Mustang Join Date: Aug 2010 Location: Michigan Posts: 125 iTrader: 1 reviews	I will try to find some time to try and come out if I can, my highschool homecoming is tomorrow so I might end up being a tad bit busy

Remove Advertisements Sponsored Links
Ford Mustang Forum Advertisement

Threads Similar to: Mobile Chassis Dyno Oct. 1 Mid Michigan
Thread	Thread Starter	Forum	Replies	Last Post
Dyno tune in West Michigan	me97gt	Midwest	7	March 17th, 2010 07:36 AM
atlanta chassis dyno	tripleblkmartini	Shops	1	January 5th, 2010 01:44 PM
Carolina Chassis Dyno	jgibby	2005 - 2010	2	April 6th, 2009 02:47 PM
Jan 19th Ft Myers - VMP Mobile Dyno - show, dyno runs and tuning by appointment	Justin00Stang	Southeast	0	January 4th, 2008 07:26 PM
VMP Tuning Mobile Dyno at the Turkey Run in Daytona Beach $60 for 2 pulls with A/F	Justin00Stang	Southeast	0	November 19th, 2007 07:59 PM

All times are GMT -4. The time now is 04:35 AM.
Contact Us - Modded Mustangs : Ford Mustang Forums - Privacy Statement - Top
Modded Mustangs is ©2005-2008, All Rights Reserved, And is Not Affiliated with Ford Motor Company. Forum is powered by vBulletin ©2000 - 2012, Jelsoft Ent. Ltd. & SEO by vBSEO 3.3.2 ©2009, Crawlability, Inc.